Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Phoenix Contact 1015464 is a RECTANGULAR POWER CONNECTOR with 2 FEMALE contacts. It features Tin (Sn) finish, POLYAMIDE insulator, and UL 94V-0 flammability rating. Ideal for CABLE mounting applications requiring reliable power connections in various industries.
Median Price
$0.340
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.180
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$0.300
$0.160
$0.146
Newark
$0.558
$0.492
$0.367
Element14
Airline Hydraulics
Farnell
$0.381
Nova Conductors
$0.179
Quotebeam
Shortec Electronics
Vyrian
ACDS - Activité Composants Distribution Service
Dynamic Solutions
VNN
Semicontronic
$0.128
$0.125
$0.124
Continental Prestige Electronics
$0.175
Netroflash
$0.170
$0.166
Argo Parts USA
$0.174
Allen Electronics Distributors
$0.197
$0.187
$0.178
Abianca Electronics
$3.329
$3.196
Corohmni
$3.432
Aztec Data Supply Inc.
$3.620
Advanced Electronics
$4.736
Tin (Sn) contact finish provides good conductivity and corrosion resistance, ensuring reliable and long-lasting performance.
Polyamide insulator material offers high heat resistance and durability, making the connector suitable for demanding environments.
Rectangular power connector design allows for easy and secure connection, ideal for power applications.
UL 94V-0 flammability rating ensures that the connector is safe to use in situations where fire safety is crucial.
Having 2 contacts provides a reliable power connection for applications that require a dual connection.
Cable mounting type makes installation convenient and ensures a secure attachment to the cable for stable connections.
Polyamide shell material offers strength and resistance to impact, enhancing the overall durability of the connector.
Crimp termination type allows for easy and secure wire termination, ensuring a strong electrical connection.
Female contact gender provides compatibility with male connectors, allowing for versatile and convenient connections.
Power Connectors 1015464 attributes and parameters. Explore more Power Connectors devices from Phoenix Contact
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Type:
Option:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1015464 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
EU2B-YS303C
Idec
ROTARY SWITCH;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
EU2B-YS3303C
1648132-1
TE Connectivity's 1648132-1 is a rectangular power connector with 40 contacts, rated at 250V. Made of polybutylene terephthalate, it operates b/w -40 to 105°C. Ideal for applications requiring male connectors in black insulator color and UL flammability rating of 94V-0.
120943-2
TE Connectivity's 120943-2 is a rectangular power connector with matte tin finish, rated at 250V and 16A. With glass-filled polyester insulator, it operates b/w -55 to 125°C. Ideal for board mounting applications requiring reliable female contacts in a right-angle receptacle design.
794274-1
TE Connectivity's 794274-1 is a RECTANGULAR POWER CONNECTOR with SILICONE RUBBER insulator. Operating temp range: -55 to 105°C. Suitable for cables with 20-14 AWG wires, rated at 115/230VAC mains connection.
43025-0608
Molex
The Molex 43025-0608 is a rectangular power connector with 6 contacts, POLYAMIDE insulator, and 1000VAC dielectric voltage. It has a temperature range of -40 to 105°C and offers high durability with 30 cycles. Ideal for board mounting applications requiring reliable female connectors with hybrid contact style.
43650-0303
The Molex 43650-0303 is a rectangular power connector with insulation resistance of 1G ohm, dielectric voltage of 1000VAC, and operating temperature range from -40 to 105°C. It is used for board and cable mounting applications, featuring a male contact gender, solder termination type, and right angle mounting style.
43640-0800
The Molex 43640-0800 is a rectangular power connector with 8 contacts, rated for 5A signal current. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications, it offers durability up to 30 cycles with UL flammability rating of 94V-0.
39-01-2205
Molex 39-01-2205 is a rectangular power connector with 20 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a body length of 1.701", width of 0.46", and depth of 0.77". Ideal for cable mounting applications requiring high insulation resistance (1Gohm) and UL94V-0 flammability rating.
39-01-2106
The Molex 39-01-2106 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator material, and dielectric voltage of 2200VAC. It is used in commercial applications for cable and panel mounting, featuring a durability of 30 cycles and operating temperatures ranging from -40 to 105°C.
1723163108
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1-480701-0
TE Connectivity 1-480701-0 is a Power Connector with 0.8"x.58"x1.08" dimensions, POLYAMIDE insulator, and -55 to 105°C operating range. Featuring 3 contacts in a RECEPTACLE body style, it's ideal for commercial applications requiring durable CRIMP terminations at 6.35mm pitch on PANEL mounts.
1-480708-0
TE Connectivity 1-480708-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 12 contacts, operates b/w -55 to 105 °C, and offers high durability with 50 cycles. Ideal for commercial applications requiring reliable power connections in cable-mounted setups.
43640-0501
The Molex 43640-0501 is a rectangular power connector with 5A signal current rating. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for commercial applications, this connector offers durability up to 30 cycles and UL flammability rating of 94V-0.
50-84-1035
The Molex 50-84-1035 is a rectangular power connector with 3 contacts, rated at 13.5A signal current. Featuring a mating contact pitch of 0.25", it has an insulation resistance of 1Gohm and can withstand up to 5000VAC. Ideal for commercial applications requiring reliable power connections in temperatures ranging from -55°C to 105°C.
IPD1-10-D-K-M
Samtec
Samtec's IPD1-10-D-K-M is a rectangular power connector with 20 female contacts. It features a 0.505" body depth and POLYAMIDE66 insulator material. Ideal for cable mounting applications, this connector has crimp termination and square pin/socket contact style.
43045-0800
Molex 43045-0800 is a rectangular power connector with 8 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with bright tin finish and LCP insulator material.
0430450818
Molex 0430450818 is a rectangular power connector with 8 contacts made of brass. It features surface mount termination and polyethylene insulator material. Ideal for board mounting applications requiring male contact gender with TIN over nickel finish.
39-03-6060
Molex 39-03-6060 is a rectangular power connector with 6 contacts, insulation resistance of 1Gohm, and dielectric voltage of 2100VAC. It is used in commercial applications for cable mounting with crimp termination, featuring a female contact gender and natural insulator color.
794617-8
TE Connectivity 794617-8 is a Power Connector with 0.118" contact pitch, rated for 250V and 5A signal current. It features POLYAMIDE66 insulation, operates b/w -40 to 105°C, and has a rectangular contact pattern. Ideal for commercial applications requiring reliable power connections in a compact form factor.
640445-3
TE Connectivity's 640445-3 is a rectangular power connector with a mating contact pitch of 0.156". It features an insulation resistance of 5Gohm, operating temperature range from -55 to 105°C, and rated current of 7A. Ideal for board mounting applications requiring durable connectors with male contacts and solder termination.
50-84-1120
The Molex 50-84-1120 is a rectangular power connector with a mating contact pitch of 0.25 inches. It has a body length of 1.05 inches and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in commercial applications requiring reliable power connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10153466-08LF
Amphenol Communications Solutions
The Amphenol 10153466-08LF is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40°C to 105°C, ideal for cable mounting applications requiring crimp termination. The connector's compact dimensions of 0.764" x 0.484" x 0.78" make it suitable for various power transmission needs.
10153466-06LF
Amphenol's 10153466-06LF is a rectangular power connector with 6 contacts, made of POLYAMIDE66. It has a compact body size of 0.598" x 0.484" x 0.78", UL94V-0 rated for -40 to 105°C. Ideal for cable mounting, it features female crimp contacts and complies with UL standards.
10153466-04LF
10153466-04LF by Amphenol is a rectangular power connector with POLYAMIDE66 insulator material. It has 4 contacts, operates b/w -40 to 105°C, and meets UL standards. Ideal for cable mounting applications, featuring female contact gender and crimp termination for reliable connections.
1015242
Phoenix Contact
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 2; Termination Contact Finish: Tin (Sn); MIL Conformity: NO;
1015244
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN; Total No. of Contacts: 4; Filter Feature: NO;
1015462
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Empty Shell: NO; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved