Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 125; Contact Material: NOT SPECIFIED; Mixed Contacts: NO;
Median Price
$0.868
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Newark
1+ parts
$0.211
100+ parts
1k+ parts
10k+ parts
-
Interstate Connecting
$0.744
$0.736
$0.695
Mouser Electronics
$0.970
$0.835
$0.794
$0.734
DigiKey
$1.640
$1.153
$0.910
Verical
$0.716
TTI
$0.780
$0.670
Power & Signal
Heilind Electronics
$0.897
PEI Genesis
Master Electronics
$0.969
$0.928
$0.836
Chip1Stop
$0.977
$0.926
Farnell
$0.721
TTI Europe
$0.646
Digiode
$0.200
Vyrian
TestEquity
$0.990
A2Z Electronics, Inc.
IBS Electronics
$0.925
$0.887
$0.800
TME
Q Components
NAC Semi
$1.080
$0.993
Corphita
$0.190
Andel Nordic
$2.948
$2.830
Perfect Parts
EMSNET (Excess)
Kepictronics
Eastek
Abacus Technologies
Combination Line Connectors 34062-0025 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Termination Type:
Total No. of Contacts:
34062-0025 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
AT04-3P-BM04
Amphenol
The Amphenol AT04-3P-BM04 is a combination line connector with 3 contacts, rated at 13A. It features a body size of 0.961" x 0.827" x 0.835", made of polyethylene for operating temperatures from -55°C to 125°C. Ideal for board mounting applications, it has male contact gender and solder termination.
ATM06-2S-KIT01
Amphenol's ATM06-2S-KIT01 is a Combination Line Connector with POLYETHYLENE insulator. It has 2 contacts, rated at 7.5A for signal current, and operates b/w -55 to 125°C. Ideal for cable mounting applications requiring crimp termination with female contact gender.
776280-1
TE Connectivity's 776280-1 is a Combination Line Connector with dimensions of 1.606" x 1.498" x 1.263". It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, UL94V-0 flammability rating, and rated current of 8A. Ideal for board mounting applications in electronics, offering polarized connectors with solder termination and a max operating temperature of 105°C.
2-1418390-1
TE Connectivity 2-1418390-1 is a Combination Line Connector with dimensions 1.693" x 1.012" x 1.23". Rated for 60V, it operates b/w -40°C to 140°C, suitable for cable mounting applications at up to 40A signal current.
DT06-08SB-CE05
TE Connectivity's DT06-08SB-CE05 is a combination line connector with dimensions of 1.267" x 0.872" x 1.465". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a crimp termination type and a max current rating of 13A.
DTP06-4S
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: POALRIZED; Total No. of Contacts: 4; Body Width: .866 inch;
194190012
Molex
Molex 194190012 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body. It uses CRIMP termination on CABLE mounting. Ideal for industrial machinery and automotive applications.
DT06-3S-CE06
TE Connectivity's DT06-3S-CE06 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulation. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style.
1-640518-0
TE Connectivity 1-640518-0 is a Combination Line Connector with 3 contacts, rated voltage of 250V, and insulation resistance of 100M ohm. It has a body length of 0.84", suitable for applications requiring a durable connector with UL94V-0 flammability rating and operating temperatures from -55 to 85°C.
2324808-2
TE Connectivity's 2324808-2 is a combination line connector with dimensions of 1.306" x 0.649" x 0.621". It has a rated voltage of 12V and can operate in temperatures ranging from -40°C to 125°C. This connector is commonly used for cable mounting applications and has a UL flammability code of 94V-0.
1-1418362-1
TE Connectivity 1-1418362-1 is a COMBINATION LINE CONNECTOR with 62 contacts, rated at 36V and 40A. It has dimensions of 5.196" x 1.889" x 2.267", suitable for BOARD mounting applications in various industries due to its high operating temperature range (-40°C to +140°C) and UL certification.
DT06-2S-CE04
TE Connectivity's DT06-2S-CE04 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features a polarized design, UL94V-0 flammability code, and supports 13A signal current. Ideal for cable mounting applications requiring crimp termination with strain relief.
MX23A34NF1
Japan Aviation Electronics Industry
MX23A34NF1 by Japan Aviation Electronics is a Combination Line Connector with dimensions 2.283" x 0.72" x 1.507". It features 34 contacts made of brass with TIN finish, suitable for board mounting and waterproof applications. The insulator material is glass filled polybutylene terephthalate, making it durable and reliable for various electronic connections.
DTM04-2P-E004
TE Connectivity's DTM04-2P-E004 is a 1.62"x.651"x.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C temperature range. It features UL 94V-0 flammability code, polarized key, and supports 7.5A signal current. Ideal for cable mounting applications requiring a male contact gender with strain relief option.
AT06-12SA-KIT01
The Amphenol AT06-12SA-KIT01 is a Combination Line Connector with 12 contacts, rated at 13A signal current. It features POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring female contact gender and crimp termination.
19418-0005
Molex 19418-0005 is a COMBINATION LINE CONNECTOR with 4 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for automotive, industrial, and consumer electronics applications.
180941
TE Connectivity 180941 is a Combination Line Connector with POLYAMIDE insulator. It has 3 contacts, operates b/w -40 to 105°C, and UL flammability rating of 94V-2. Used for cable mounting applications at 115/230VAC mains connector rating, featuring female contact gender in a receptacle shell style with latching option.
12084891
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Mating Info.: 12186400; IEC Conformity: NO;
DTP04-4P
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Additional Features: POALRIZED; Body Length: 1.063 inch;
AT04-6P-PM05
The Amphenol AT04-6P-PM05 is a 2-row combination line connector with 6 contacts, rated for 13A signal current. With dimensions of 1.969" x 1.22" x 0.787", it uses POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications, mating with AT04-6S-PM05 receptacle connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved