Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Design: PREASSEM CONN; No. of Rows Loaded: 1; Body Length: 1.009 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$7.586
$7.283
Corphita
Combination Line Connectors 33471-0409 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Filter Feature:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
33471-0409 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
EU2B-YS303C
Idec
ROTARY SWITCH;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DT06-12SC-C015
TE Connectivity
TE Connectivity's DT06-12SC-C015 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, suitable for cable mounting applications requiring polarized connectors with strain relief.
ATM06-3S
Amphenol
The Amphenol ATM06-3S is a combination line connector with 3 contacts, rated at 7.5A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector has a body size of 0.642" x 0.638" x 1.087".
776262-1
TE Connectivity's 776262-1 is a Combination Line Connector with 3 rows, UL94V-0 rated, and 14 contacts. It has a mating contact pitch of 0.157", suitable for PCB mounting at temperatures ranging from -40°C to 105°C. Ideal for commercial applications requiring an 8A signal current capacity.
1-776163-5
TE Connectivity 1-776163-5 is a Combination Line Connector with dimensions 3.03"x1.498"x1.49". It has 35 contacts, rated at 17A, and operates b/w -40°C to 125°C. Ideal for board mounting applications requiring POLYBUTYLENE TEREPHTHALATE insulator material and solder termination.
DT06-2S-CE05
TE Connectivity's DT06-2S-CE05 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design with 13A signal current capacity. Ideal for cable mounting applications requiring crimp termination.
DT06-12SA-P012
TE Connectivity's DT06-12SA-P012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-12SA-CE13
TE Connectivity's DT06-12SA-CE13 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-certified connector with strain relief mounting on cables.
DT04-3P-P006
TE Connectivity's DT04-3P-P006 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
AT06-2S-RD01
The Amphenol AT06-2S-RD01 is a combination line connector with 2 contacts, rated at 13A. Featuring a POLYETHYLENE insulator, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT06-2P-RD01 connectors for crimp termination in female plug configurations.
DTM04-4P-E004
TE Connectivity's DTM04-4P-E004 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125°C, and can handle a signal current of 7.5A. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
194180029
Molex
Molex 194180029 is a COMBINATION LINE CONNECTOR with 16 contacts, FEMALE gender, and RECEPTACLE body style. It uses CRIMP termination on CABLE mounting. Ideal for automotive and industrial applications requiring reliable connectivity in compact spaces.
1-85112-2
TE Connectivity 1-85112-2 is a Combination Line Connector with dimensions 1.398" x 1.697" x 1.429". It has 13 contacts, operates b/w -40°C to 85°C, and uses POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for applications requiring a polarized plug with crimp termination in cable mounting setups.
AT06-3S-BLK
The Amphenol AT06-3S-BLK is a combination line connector with 3 contacts, rated for 13A signal current. It has a compact body size of 0.894" x 0.724" x 1.138", suitable for cable mounting with crimp termination. Ideal for applications requiring a female contact gender and operating temperatures from -55°C to 125°C.
1-1564297-6
TE Connectivity 1-1564297-6 is a Combination Line Connector with dimensions 4.744"x1.811"x1.732". Rated for 36V, it operates b/w -40 to 120°C, ideal for applications requiring a 40A signal current. Features polarized housing and glass-filled polybutylene terephthalate insulator material for secure cable mounting with strain relief.
DT06-3S
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: DT; Body or Shell Style: PLUG; MIL Conformity: NO;
ATP06-2S-BLK
The Amphenol ATP06-2S-BLK is a combination line connector with polyethylene insulator, rated for 25A signal current. It operates b/w -55°C to 125°C, suitable for cable mounting applications. Featuring a female contact gender and round pin/socket style, it is ideal for use in environments requiring high temperature resistance.
2286003-3
TE Connectivity's 2286003-3 is a Combination Line Connector with dimensions of 1.244" x 0.591" x 0.622". It has a rated voltage of 48V, operating temperature range from -55 to 125°C, and UL flammability rating of 94V-0. Ideal for applications requiring a polarized connector with a signal current rating of 13A.
DTM04-6P-E005
TE Connectivity's DTM04-6P-E005 is a 1.77"x.756"x.937" combination line connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 flammability rating, and 250V voltage. It has 6 contacts, rated at 7.5A for signal current, operating from -55 to 125°C. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
DTM06-4S
DTM06-4S by TE Connectivity is a combination line connector with 4 contacts, rated at 250V and 7.5A. It features a glass-filled polyamide insulator material, operates b/w -55 to 125°C, and has a UL flammability code of 94V-0. Ideal for applications requiring a polarized housing and crimp termination in cable mounting setups.
DTM04-08PA-E005
TE Connectivity's DTM04-08PA-E005 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and can handle a signal current of 7.5A. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved