Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body or Shell Style: RECEPTACLE;
Median Price
$0.970
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Avnet
1+ parts
$0.354
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.591
$0.508
DigiKey
$1.070
Digiode
$0.590
Vyrian
$0.621
PC Components Company LLC
Bristol Electronics
Connector Distribution Corp
Right Parts Inc.
Elcom Components
Corphita
$0.559
Assy Fe
Headers & Edge Type Connectors 26-60-3060 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
26-60-3060 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Packaging - Multiple Devices Align Packaging 07/Jun/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Silicon Standard
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
National Semiconductor
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Synsemi
Bytesonic Electronics
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
823-22-020-10-001101
Mill-max Mfg
823-22-020-10-001101 by Mill-max Mfg is a board stacking connector with 20 contacts in 2 rows. It features gold over nickel termination, UL94V-0 flammability rating, and solder termination type. Ideal for applications requiring reliable male connectors with straight mounting style.
53261-0671
Molex
The Molex 53261-0671 is a board connector with 6 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.049", it has an insulation resistance of 100M ohm and operates b/w -40°C to 105°C. Ideal for applications requiring a durable, right-angle mounting style with surface mount termination.
51952-283LF
AMPHENOL ICC
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
FH12A-40S-0.5SH(55)
Hirose Electric
FH12A-40S-0.5SH(55) by Hirose Electric is a FFC/FPC connector with 40 contacts, gold termination finish, and 500M ohm insulation resistance. It operates b/w -40 to 85°C, has a mating pitch of 0.02", and is used in board mounting applications requiring high durability and reliability.
DF40C-80DP-0.4V(51)
DF40C-80DP-0.4V(51) by Hirose Electric is a 2-row, 80-contact board stacking connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.016", it offers high insulation resistance of 50M ohm and withstands up to 100VAC. Ideal for PCB applications requiring reliable signal transmission in commercial environments at temperatures ranging from -35°C to 85°C.
B3B-PH-K-S(LF)(SN)
J S T Mfg
B3B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator, operates b/w -25 to 85 °C, and features TIN contact finish. Ideal for applications requiring reliable board-to-board connections in electronic devices.
B2B-XH-A(LF)(SN)
B2B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring a male contact gender, solder termination, and operating temperatures from -25 to 85 °C.
502
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; DIN Conformance: NO; MIL Conformity: NO;
BM04B-GHS-TBT(LF)(SN)
BM04B-GHS-TBT(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE9T insulator, and 500VAC dielectric voltage. Ideal for applications requiring a male connector with surface mount termination, operating b/w -25 to 85 °C, UL-rated for flammability.
75710-5006
Molex 75710-5006 is a board connector with 132 contacts in 11 rows, featuring a mating contact pitch of 0.073". It has a body width of 0.917" and termination contact finish of TIN over NICKEL. Ideal for commercial applications requiring reliable right-angle mounting on PCBs.
M50-3600542
Harwin Plc
The Harwin PLC M50-3600542 is a 10-contact board connector with 0.05" mating contact pitch, suitable for PCB applications. Featuring a 1A signal current rating, it has a durable design with 300 cycles lifespan and operates b/w -40°C to 105°C temperature range. The connector has tin finish contacts and polyethylene insulation material, meeting UL standards for reliability.
09-50-3031
Molex 09-50-3031 is a board connector with 0.156" mating contact pitch, 0.464"x.25"x.625" body dimensions, and polyamide insulator material. It has 3 contacts, female gender, and bellowed type contact style for cable mounting applications. The UL-approved connector features a natural insulator color and locking mounting option for commercial reliability.
09032966825
Harting Electronics & Kg
09032966825 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for board connections in commercial applications due to its durability, UL Flammability Code rating of 94V-0, and rated current signal capacity of 2A.
1761606-3
TE Connectivity
TE Connectivity's 1761606-3 is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features a body length of 0.8", insulation resistance of 5G ohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
TMM-110-01-S-D-SM-TR
Samtec
The Samtec TMM-110-01-S-D-SM-TR is a 2-row, 20-contact board connector with a mating contact pitch of 0.079". It features tin termination with nickel barrier, gold finish, and phosphor bronze contacts. Ideal for commercial applications requiring a reliable connection in temperatures ranging from -55°C to 125°C.
851-
851- by Mill-max Mfg is a BOARD CONNECTOR with 1.27mm Terminal Pitch, SOLDER Termination Type, and MALE Contact Gender. It is used in Headers & Edge Type Connectors for STRAIGHT Mounting on PCBs.
61300811121
Wuerth Elektronik & Kg
61300811121 by Wurth Elektronik is a BOARD CONNECTOR with 8 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and can withstand up to 500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 125°C on PCBs with a rectangular contact pattern.
BM03B-SRSS-TB(LF)(SN)
BM03B-SRSS-TB(LF)(SN) by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.039" pitch, suitable for -25 to 85°C temp range. Featuring POLYAMIDE insulator, COPPER ALLOY contacts, and 100000000 ohm insulation resistance, it's ideal for PCB applications requiring 1A signal current.
22-16-2060
The Molex 22-16-2060 board connector features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and dielectric voltage rating of 250VAC. Ideal for PCB edge locking hook mounting, this female plug connector has a durability of 25 cycles and is rated for a max operating temperature of 105°C.
B3B-PH-SM4-TBT(LF)(SN)
B3B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, made of COPPER ALLOY. It features Tin (Sn) over Copper (Cu) termination and has a terminal pitch of 2mm. Ideal for surface mount applications in headers & edge type connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved