Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Insulator Material: POLYAMIDE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Corphita
Headers & Edge Type Connectors 22-45-8132 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Minimum Insulation Diameter:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
22-45-8132 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
BAV99
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
1-281742-0
TE Connectivity 1-281742-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and right angle mounting for various applications.
FTSH-105-01-L-DV-007-K
Samtec
Samtec's FTSH-105-01-L-DV-007-K is a 2-row, 9-contact board connector with a contact pitch of 0.05". It features liquid crystal polymer insulator material, tin termination finish, and operates b/w -55°C to 125°C. Ideal for applications requiring high signal current capacity and reliable surface mount connections.
22-05-2071
Molex
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
TSW-106-07-G-S
Samtec TSW-106-07-G-S is a 6-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body size of 0.6" x 0.098" x 0.1". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C and meets UL standards.
DF13-2S-1.25C
Hirose Electric
DF13-2S-1.25C by Hirose Electric is a 2-contact board connector with 0.049" pitch, rated at 1A signal current. Featuring polyamide insulation and beige color, it withstands up to 500VAC voltage and operates b/w -35°C to 85°C. Ideal for commercial applications requiring durability, it uses crimp termination and offers a min withdrawal force of 0.3N.
FTSH-105-01-L-DV-K-TR
Samtec's FTSH-105-01-L-DV-K-TR is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring TIN over nickel finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable male connectors in black insulator material.
B6B-PH-SM4-TB(LF)(SN)
J S T Mfg
B6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for PCB applications requiring POLYAMIDE66 insulator, COPPER ALLOY contacts, and TIN COPPER finish in a compact 0.628"x.197"x.26" body.
53398-0771
The Molex 53398-0771 header connector features a mating contact pitch of 0.049", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting with solder holding posts, this connector is designed for applications requiring a durable, polarized male connector with a total of 7 contacts.
103956-9
TE Connectivity 103956-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features tin/lead finish, polyethylene insulation, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable female connectors with polarization key in black color.
22-03-5035
The Molex 22-03-5035 is a board connector with a mating contact pitch of 0.098", insulation resistance of 1Gohm, and dielectric voltage rating of 1000VAC. It is used in applications requiring a durable, polarized housing with male contacts for signal currents up to 3A. The connector has UL94V-0 flammability rating and operates b/w -40°C to 105°C, making it suitable for commercial reliability standards.
SHF-105-01-L-D-SM-TR
SHF-105-01-L-D-SM-TR by Samtec is a 10-contact, dual-row board connector with TIN over nickel finish. It features a terminal pitch of 1.27mm and surface mount termination for male contacts. Ideal for applications requiring straight mounting on boards in headers & edge type connectors category.
B8B-PH-SM4-TB(LF)(SN)
B8B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 8 contacts, made of COPPER ALLOY. It features Tin/Copper (Sn/Cu) termination finish and has a terminal pitch of 2mm. Ideal for surface mount applications in headers & edge type connectors.
7-188275-8
TE Connectivity 7-188275-8 is a 2-row, 8-contact board connector with 0.05" pitch. With insulation resistance of 1Gohm and rated voltage of 100V, it's ideal for PCB applications. Featuring POLYAMIDE46 insulator material, this header has a temperature range from -40 to +105 °C.
833-87-054-30-001101
Preci-dip Sa
833-87-054-30-001101 by Preci-dip Sa is a 54-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Featuring Beryllium Copper contacts with AU finish, it offers high durability of 500 cycles and insulation resistance of 10 Gohm. Ideal for applications requiring a mating contact pitch of 0.079", such as commercial electronics systems.
EHR-4
EHR-4 by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 0.15" body width, and 0.28" body depth. It has 4 contacts, UL 94V-0 flammability rating, and FEMALE gender. Ideal for CABLE mounting with CRIMP termination, suitable for various electronic applications.
52465-1071
52465-1071 by Molex is a 2-row BOARD CONNECTOR with 0.031" pitch, 10 contacts, and 0.5A signal rating. It features LIQUID CRYSTAL POLYMER insulator, TIN finish, and 500VAC dielectric voltage. Ideal for commercial applications requiring STRAIGHT mounting and SURFACE MOUNT termination.
52746-1071
Molex 52746-1071 FFC/FPC connector with 10 contacts, gold finish, and white insulator. Suitable for board mounting with a mating pitch of 0.020", operating from -40 to 85°C. Ideal for commercial applications requiring a durable, surface-mountable connector with UL certification.
70107-0001
Molex 70107-0001 is a board connector with 0.1" pitch, ideal for cable mounting. Featuring polyester insulator material, it has 2 contacts and UL94V-0 flammability rating. This rectangular connector uses crimp termination and male SQ pin-skt contact style, suitable for various edge type applications.
B4B-XH-AM
B4B-XH-AM by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and is UL 94V-0 rated. Ideal for board mounting applications requiring male connectors with solder termination.
XF2M-4015-1A-R100
Omron
Omron XF2M-4015-1A-R100 is a FFC/FPC connector with 40 contacts, rated at 0.5A signal current. It features gold (Au) termination finish, 250VAC dielectric voltage, and 100000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings with operating temperatures from -30 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved