Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
Median Price
$61.330
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$40.150
1k+ parts
-
10k+ parts
Verical
$65.060
Master Electronics
$76.593
$32.550
DigiKey
Chip1Stop
Newark
$56.510
Farnell
Powell Electronics
$44.080
$37.850
$33.190
Digiode
$47.282
Vyrian
$49.770
Elcom Components
Rapid Electronics
IBS Electronics
$34.837
$30.538
TME
Andel Nordic
$43.840
$30.687
Corphita
$44.793
Metaverse IC Inc.
Assy Fe
Headers & Edge Type Connectors 22-27-2241 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
22-27-2241 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
NXP Semiconductors
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SQT-120-01-F-D
Samtec
SQT-120-01-F-D by Samtec is a 40-contact board connector with a contact pitch of 0.079". It features a matte tin finish, liquid crystal polymer insulator, and gold flash over nickel mating contacts. Ideal for applications requiring high durability and reliability in commercial settings.
7-188275-6
TE Connectivity
TE Connectivity 7-188275-6 is a FFC/FPC connector with 0.05" mating contact pitch, 100 V rated voltage, and -40 to 105 °C operating temperature range. It has POLYAMIDE46 insulator material and is ideal for board mounting applications requiring high insulation resistance and low contact resistance.
1-1658621-1
TE Connectivity 1-1658621-1 is a dual-row board connector with 60 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it has a durable design for up to 75 cycles. Ideal for cable mounting applications, this connector operates b/w -65°C to 105°C temperature range.
22-05-7048
Molex
Molex 22-05-7048 is a board connector with 4 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications, it has a temperature range from -40 to 105°C and UL flammability rating of 94V-0.
67910-5700
The Molex 67910-5700 is a card edge connector with 52 contacts, featuring gold over nickel termination finish. With a mating contact pitch of 0.031", it offers high insulation resistance of 500M ohm and withstands up to 300VAC dielectric voltage. Ideal for board mounting applications in commercial settings, this connector has a durability of 50 cycles and operates b/w -40°C to 80°C temperatures.
22-01-3067
The Molex 22-01-3067 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.622 inch. It has an insulation resistance of 1000000000 ohm and can withstand a dielectric voltage of 700VAC. This connector is commonly used in commercial applications due to its durability, removable contact block design, and polarization key feature.
356-022-520-102
Edac
Edac 356-022-520-102 is a 22-contact card edge connector with 0.156" pitch, rated at 5A power. It features a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm. Ideal for board mounting applications in electronics, offering high reliability with UL certification and operating temperatures from -40 to 105°C.
501568-0607
The Molex 501568-0607 is a board connector with a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 350VAC. It is used in applications requiring a durable, right-angle mounting style for up to 30 cycles, ideal for commercial reliability standards.
B02B-PASK-1(LF)(SN)
B02B-PASK-1(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.079" pitch, suitable for PCB mounting with 800VAC dielectric voltage. Featuring glass-filled polybutylene terephthalate insulation and copper alloy contacts, it operates b/w -25 to 85°C, making it ideal for signal applications requiring up to 3A current.
17211102102
Harting Electronics & Kg
17211102102 by Harting Electronics & Kg is a BOARD CONNECTOR with 110 contacts in 5 rows, featuring NICKEL finish. It has a terminal pitch of 2mm and PRESS FIT termination, UL94V-0 rated for flammability. Ideal for board mounting applications requiring FEMALE contact gender and RIGHT ANGLE mounting style.
FTSH-110-01-L-DV-K-P-TR
Samtec's FTSH-110-01-L-DV-K-P-TR is a 20-contact board connector with a mating contact pitch of 0.05". It features a liquid crystal polymer insulator, matte tin termination finish, and gold mating contacts. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
35362-0450
Molex 35362-0450 is a board connector with 4 contacts, featuring 0.079" mating pitch and 0.406" body length. It uses matte tin finish, brass contact material, and polyamide insulator. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
XHP-4-M
XHP-4-M by J S T Mfg is a 4-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contact gender, CABLE mounting type, and CRIMP termination. Ideal for applications requiring secure cable connections in electronic devices.
307-074-422-212
Edac 307-074-422-212 is a CARD EDGE CONNECTOR with 74 contacts, 5A signal current rating, and 2545VAC dielectric voltage. It has a 0.156" pitch for PCB mating and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance.
39-53-2165
Molex 39-53-2165 FFC/FPC Connector features 16 contacts with 0.049" pitch, 0.197" body width, and 0.386" depth. Ideal for PCB applications requiring a 1.9812mm row spacing, this UL-certified connector offers reliable solder termination in commercial settings.
EHR-4
EHR-4 by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 0.15" body width, and 0.28" body depth. It has 4 contacts, UL 94V-0 flammability rating, and FEMALE gender. Ideal for CABLE mounting with CRIMP termination, suitable for various electronic applications.
324-91-164-41-002000
Mill-max Mfg
BOARD CONNECTOR; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e0; Contact Material: BERYLLIUM COPPER;
70553-0004
Molex 70553-0004 is a board connector with 0.1" pitch, ideal for commercial applications. Features TIN over nickel finish, UL94V-0 rated black polycarbonate insulator, and 15u plating thickness. Suitable for right-angle mounting on PCBs with rectangular contact pattern.
FTSH-105-01-L-DV-K-A
Samtec's FTSH-105-01-L-DV-K-A is a 2-row, 10-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel for reliability and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a surface mount termination type on PCBs with rectangular contact patterns.
61300211121
Wuerth Elektronik & Kg
61300211121 by Wuerth Elektronik & Kg is a board connector with a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage of 500VAC. It is used in applications requiring a rated current of 3A, operating temperatures from -40 to 125°C, and UL94V-0 flammability compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved