Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 22-23-2101 is a board connector with 10 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and contact material made of brass. It is used in commercial applications, has a body length of 0.994", and termination type is solder for reliable connections on PCBs.
Median Price
$0.302
Lifecycle Status
Suppliers In-Stock
63
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.190
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.237
Sager
$0.276
$0.209
Heilind Electronics
$0.286
$0.241
$0.227
Avnet
$0.318
Interstate Connecting
$0.331
$0.290
$0.262
Element14
$0.448
$0.319
Newark
$0.610
$0.438
$0.372
Mouser Electronics
$0.640
$0.415
$0.365
$0.330
DigiKey
$0.690
$0.455
$0.358
$0.293
TTI
$0.226
Master Electronics
$0.382
$0.315
Verical
$0.340
$0.320
TTI Europe
$0.224
Powell Electronics
$0.281
$0.260
Farnell
$0.233
$0.164
RS (Exports)
$0.496
$0.392
Chip1Stop
$0.221
$0.214
Digiode
$0.180
Electro Sonic
$0.249
$0.217
DF Sales Co.
TestEquity
$0.300
Nova Conductors
$0.314
Rapid Electronics
$0.348
TME
$0.480
$0.333
$0.280
$0.258
Component Electronics Inc.
$0.500
$0.380
Bisco
$0.957
NAC Semi
$0.301
Vyrian
IBS Electronics
Atlantic Semiconductor
Prism Electronics
EMSNET
Semtec, LLC
Halfin
Ashlea Components Ltd
Semi Source
VNN
Electronics Depot
Florida Circuit
A2Z Electronics, Inc.
Bristol Electronics
R&J Components
PC Components Company LLC
Inventory MP
Mil-Aero Solutions, Inc.
Elcom Components
J & M Industries LLC
ZD Integrated Circuits Inc.
Resion
Extreme Components
Quantum Digital Technology
Electronic Expediters
Sogenti Electronics
LWI Electronics Inc
Mentor Electronics Marketing, LLC
A&K Electronics
NexGen Digital
ComSIT Distribution GmbH
First Choice Components Inc.
Technoshack Inc.
Sensible Micro Corp
Semicontronic
$0.162
$0.158
$0.157
Corphita
$0.171
Argo Parts USA
$0.304
Modulus Dynamics
$0.345
$0.334
Continental Prestige Electronics
$0.621
$0.355
$0.279
Aztec Data Supply Inc.
$4.023
Advanced Electronics
$11.933
$10.859
$9.785
Andel Nordic
$48.440
$33.908
Kepictronics
Eastek
Robosynatics
$0.264
Lucentia Tech
Infinite Electronics LLP (Excess)
Assy Fe
Abacus Technologies
Netroflash
$0.308
$0.298
$0.292
Speed Components Ltd (Excess)
The close proximity of contacts allows for a high density of connections, making this product suitable for applications requiring multiple connections in a compact space.
High insulation resistance ensures reliable and stable connections, reducing the risk of short circuits or signal interference.
Thick plating provides excellent corrosion resistance and ensures long-term durability, making this product suitable for harsh environments.
The high number of contacts allows for multiple connections, making this product ideal for applications requiring a significant amount of data transfer or signal routing.
The white color of the insulator allows for easy identification and organization of connections, reducing the risk of errors during installation or maintenance.
Headers & Edge Type Connectors 22-23-2101 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
22-23-2101 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Mini-FIt,KK Plating 01/Nov/2011
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Packaging - Multiple Devices Packaging 22/May/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Yangzhou Yangjie Electronics
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
1552200168
Molex
WIRE AND CABLE;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
FTSH-105-01-F-DV-K-A-P-TR
Samtec
Samtec's FTSH-105-01-F-DV-K-A-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts plated with gold flash over nickel for signal currents up to 3.4A. Ideal for commercial applications requiring reliable surface mount connections at temperatures ranging from -55°C to 125°C.
62684-401100ALF
Amphenol Communications Solutions
62684-401100ALF by Amphenol: FFC/FPC connector with 40 contacts, 0.020" pitch, gold finish. Ideal for board mounting in applications requiring high reliability and signal integrity.
801-43-025-10-012000
Mill-max Mfg
Mill-max Mfg 801-43-025-10-012000 is a 25-contact board connector with matte tin over nickel finish. It has a terminal pitch of 2.54mm and UL flammability rating of 94V-0. Ideal for applications requiring female socket connectors on PCBs.
1473005-4
TE Connectivity
TE Connectivity 1473005-4 is a card edge connector with 200 contacts, 0.024" pitch, and polyethylene insulation. It operates b/w -55°C to 85°C, suitable for PCB mounting applications requiring high durability and reliability in commercial settings.
5056
Aries Electronics
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: RIGHT ANGLE; Mounting Type: BOARD;
560020-0220
The Molex 560020-0220 is a board connector with 2 contacts, 0.079" pitch, and 3A signal current rating. It features a polyamide insulator, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with surface mount termination.
70553-0001
Molex 70553-0001 is a board connector with 0.1" pitch, matte tin finish, and glass-filled polycarbonate insulator. Ideal for commercial applications, it features right-angle mounting and solder termination for reliable connections in electronic devices.
90142-0010
The Molex 90142-0010 is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 1000000000 ohm. It has a body width of 0.304 inch and is commonly used in cable mounting applications.
5031821852
Molex 5031821852 PCB connector has 8 contacts with 0.043" pitch. Made of liquid crystal polymer, it withstands -25 to 85°C. Ideal for commercial applications, offering durability of 10k cycles and male contact gender.
ZHR-2
J S T Mfg
ZHR-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with a mating contact pitch of 0.059". Its compact body measures 0.134" in width and 0.189" in depth, meeting UL Flammability Code 94V-0 standards. Ideal for CABLE mounting, this CRIMP termination FEMALE connector is commonly used in electronic applications requiring reliable connections.
SHR-14V-S-B
SHR-14V-S-B by J S T Mfg is a 14-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
22-04-1021
Molex 22-04-1021 header connector features 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board connections in applications requiring a durable, polarized housing with male SQ pin-skt contacts.
VHR-2N-BK
BOARD CONNECTOR;
50-57-9002
The Molex 50-57-9002 is a board connector with a mating contact pitch of 0.1". Featuring glass-filled polyester insulator, it operates b/w -40 to 105°C. With female SQ pin-skt contacts, it is ideal for commercial applications requiring a reliable rectangular contact pattern.
TFM-110-01-L-D-RE1-WT
Samtec TFM-110-01-L-D-RE1-WT is a 20-contact board connector with 0.05" pitch, suitable for PCBs with rectangular contact pattern. It features tin termination finish, phosphor bronze contacts, and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable right-angle mounting with polarized housing and UL flammability rating of 94V-0.
TSM-104-01-T-SH
Samtec's TSM-104-01-T-SH header connector features a 0.1" contact pitch, matte tin finish, and liquid crystal polymer insulator. Ideal for board mounting with a temperature range of -55 to 105°C, it has a right-angle male contact style suitable for commercial applications.
851-43-025-10-001000
The Mill-max Mfg 851-43-025-10-001000 is a board connector with a total of 25 contacts and a terminal pitch of 1.27mm. It features a matte tin over nickel contact finish and is commonly used in applications requiring female socket connectors on circuit boards.
XHP-8
XHP-8 by J S T Mfg is an 8-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, CABLE mounting, and CRIMP termination. Ideal for applications requiring reliable edge-type connectors in receptacle form factor.
1-1473005-1
TE Connectivity 1-1473005-1 is a PCMCIA connector with 200 contacts, rated at 0.5A. It features POLYETHYLENE insulator, UL94V-0 flammability code, and operates b/w -55 to 85°C. Ideal for board mounting applications requiring a right angle socket with surface mount termination.
FTSH-105-01-L-DV-K-FR
Samtec's FTSH-105-01-L-DV-K-FR is a 10-contact, 2-row male board connector with tin finish and nickel barrier. Featuring a terminal pitch of 1.27mm, it is UL 94V-0 rated for surface mount applications. Ideal for use in headers & edge type connectors on PCBs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-23-2021
Molex 22-23-2021 header connector features 0.1" mating contact pitch, 0.194" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with UL and CSA standards compliance.
22-23-2031
The Molex 22-23-2031 is a board connector with 3 male contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1G ohm, and body length of 0.294". It is used in commercial applications, with UL flammability rating of 94V-0 and termination via solder for reliability.
22-23-2041
The Molex 22-23-2041 is a board connector with 0.1" pitch, suitable for commercial applications. It features brass contacts with matte tin finish, white polyamide insulator, and 4 male pins in a rectangular pattern. The connector has a total of 4 contacts and offers high insulation resistance of 1000000000 ohm.
22-23-2051
The Molex 22-23-2051 is a board connector with 5 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and termination contact finish in matte tin over nickel. It is commonly used in commercial applications for PCB connections due to its rectangular contact pattern and solder termination type.
22-23-2061
The Molex 22-23-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring a reliable connection with solder termination and rectangular contact pattern.
22-23-2081
The Molex 22-23-2081 is a board connector with 8 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1Gohm. It has a body length of 0.794", body width of 0.25", and insulator material made from polyamide. This connector is commonly used in commercial applications requiring reliable connections on PCBs.
22-23-2071
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: UL;
22-23-2121
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
2223
Singatron Enterprise
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 2223; Terminal Pitch (mm): 2.54; MIL Conformity: NO;
22-23-2091
The Molex 22-23-2091 is a board connector with 9 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1000000000 ohm. It has a body length of 0.894", body width of 0.25", and termination contact finish in Tin (Sn) with Nickel (Ni) barrier. This connector is commonly used in commercial applications requiring reliable connections on PCBs.
22-23-5024
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
22-23-2111
The Molex 22-23-2111 is a board connector with 11 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1000000000 ohm. With a body length of 1.094", it is ideal for commercial applications requiring a reliable connection on PCBs with rectangular contact patterns.
22-23-2261
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
22-23-2141
The Molex 22-23-2141 is a board connector with 14 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1G ohm. It has a body length of 1.394", matte tin termination finish, and brass contact material. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
22-23-2181
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
22-23-2201
The Molex 22-23-2201 is a board connector with 20 contacts, 0.1" pitch, and 100u plating thickness. It features polyamide insulation, solder termination, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
22-23-5034
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Resistance: 10 mohm;
22-23-2131
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
22-23-3034
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
22-23-2161
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved