Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 22-23-2091 is a board connector with 9 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1000000000 ohm. It has a body length of 0.894", body width of 0.25", and termination contact finish in Tin (Sn) with Nickel (Ni) barrier. This connector is commonly used in commercial applications requiring reliable connections on PCBs.
Median Price
$0.306
Lifecycle Status
Suppliers In-Stock
45
In-Stock Inventory
1k+
Avnet
1+ parts
$0.249
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$0.251
Arrow
$0.261
$0.240
$0.226
$0.212
Sager
$0.269
$0.204
Heilind Electronics
$0.213
Verical
$0.270
Master Electronics
$0.341
$0.310
$0.250
Farnell
$0.364
$0.248
$0.233
Mouser Electronics
$0.440
$0.367
$0.281
RS Americas
$0.485
$0.368
$0.296
Element14
$0.517
$0.336
$0.316
$0.279
Newark
$0.578
$0.426
$0.377
DigiKey
$0.690
$0.451
PEI Genesis
NEP Electronics
Chip1Stop
$0.268
$0.237
RS (Exports)
Freelance Electronics
$0.149
Digiode
Electro Sonic
$0.290
$0.263
$0.222
Nova Conductors
$0.354
TME
$0.480
$0.342
$0.246
$0.164
Component Electronics Inc.
$0.540
$0.400
$0.350
Vyrian
ComSIT Distribution GmbH
IBS Electronics
$0.223
VNN
R&J Components
Semi Source
Semtec, LLC
Electronic Expediters
PC Components Company LLC
Electronics Depot
Prism Electronics
Bristol Electronics
A2Z Electronics, Inc.
NAC Semi
ZD Integrated Circuits Inc.
Classic Components Corporation
First Choice Components Inc.
QIE Inc.
Mil-Aero Solutions, Inc.
Standard Data Resources
North Shore Components
Sogenti Electronics
Semicontronic
$0.183
$0.178
Corphita
$0.194
Argo Parts USA
$0.343
Continental Prestige Electronics
$0.686
$0.389
$0.347
Aztec Data Supply Inc.
$6.332
Advanced Electronics
$6.616
$6.021
$5.425
Andel Nordic
$57.130
$39.988
Kepictronics
Perfect Parts
Futuretech Components
Robosynatics
$1.883
$1.844
Lucentia Tech
Netroflash
$0.329
A-Plus Industry Inc.
Assy Fe
Eastek
0.1 - Provides precise connections for reliable performance.
0.894 inch - Offers a compact, space-saving design for efficient PCB layout.
1000000000 ohm - Ensures safety and prevents electrical shorts.
0.25 inch - Allows for easy integration into various electronic projects.
Tin (Sn) - with Nickel (Ni) barrier - Enhances durability and corrosion resistance.
0.322 inch - Provides a sturdy and secure connection.
POLYAMIDE - Offers excellent insulation properties for added safety.
100u - Ensures long-lasting performance and connectivity.
BOARD CONNECTOR - Specifically designed for easy PCB connections.
BRASS - Provides reliable conductivity and durability.
94V-0 - Meets safety standards for fire resistance.
WHITE - Allows for easy visibility and organization.
UL - Meets industry standards for quality and reliability.
9 - Offers multiple connection options for versatility.
ONE - Simplifies installation and setup.
BOARD - Convenient for PCB integration.
2.54 - Ensures compatibility with standard PCB layouts.
RECTANGULAR - Enables secure and stable connections.
SOLDER - Provides a strong and reliable connection method.
MALE - Suitable for various electronic applications.
10 mohm - Ensures minimal electrical loss for efficient performance.
RECEPTACLE - Allows for easy connection and disconnection.
STRAIGHT - Provides a simple and secure mounting option.
SQ PIN-SKT - Ensures a reliable and secure connection.
4.8928 - Ensures easy and secure connections.
LOCKING - Adds extra security for stable connections.
0.14 inch - Offers a compact design for efficient PCB layout.
FRICTION LOCK - Provides additional stability for secure connections.
RECTANGULAR - Enables precise and stable connections.
COMMERCIAL - Ensures consistent performance for commercial applications.
Headers & Edge Type Connectors 22-23-2091 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
22-23-2091 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Mini-FIt,KK Plating 01/Nov/2011
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
PCN Packaging - Multiple Devices Packaging 09/May/2016 Multiple Devices Packaging 22/May/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Daco Semiconductor
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Kec
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Cheng-yi Electronic
51021-0700
Molex
The Molex 51021-0700 is a board connector with 7 contacts, 0.049" pitch, and 0.413" body length. It has an insulation resistance of 100M ohm and operates b/w -40°C to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
801-43-025-10-012000
Mill-max Mfg
Mill-max Mfg 801-43-025-10-012000 is a 25-contact board connector with matte tin over nickel finish. It has a terminal pitch of 2.54mm and UL flammability rating of 94V-0. Ideal for applications requiring female socket connectors on PCBs.
B4PS-VH(LF)(SN)
J S T Mfg
B4PS-VH(LF)(SN) by J S T Mfg is a 4-contact board connector with a mating contact pitch of 0.156 inches. It has a body length of 0.621 inch and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in applications requiring a right angle mounting style and solder termination type.
22-01-3077
The Molex 22-01-3077 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 700VAC dielectric voltage and -40 to 105°C operating temperature range, it offers reliable signal current of 4A. With POLYAMIDE insulation material and UL94V-0 flammability rating, this connector is ideal for commercial applications requiring durable and polarized female contacts.
VHR-8N
VHR-8N by J S T Mfg is a 0.156" pitch BOARD CONNECTOR with 8 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. Ideal for cable mounting applications, it has a temperature range of -25 to 85°C and UL94V-0 flammability rating.
PHR-6-Y
PHR-6-Y by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and POLYAMIDE66 insulator. It has a dielectric voltage of 800VAC, operates b/w -25 to 85°C, and features FEMALE SQ PIN-SKT contacts for CABLE mounting applications.
DF11-14DP-2DSA(01)
Hirose Electric
DF11-14DP-2DSA(01) by Hirose Electric is a 14-contact board connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 85°C and is suitable for commercial applications.
45108-010030
3m Electronic Products Division
The 3M Electronic Products Division's 45108-010030 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1G ohm, and dielectric voltage rating of 1250VAC. It has female contacts, operates b/w -65 to 125°C, and is suitable for commercial applications requiring reliable signal currents up to 2.5A.
324-91-164-41-002000
BOARD CONNECTOR; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e0; Contact Material: BERYLLIUM COPPER;
FTSH-105-01-F-DV-K-FR
Samtec
Samtec's FTSH-105-01-F-DV-K-FR is a 10-contact, 2-row male board connector with tin finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in headers & edge type connectors.
M80-5401042
Harwin Plc
M80-5401042 by Harwin PLC is a 10-contact board connector with 0.079" mating contact pitch, suitable for PCB mounting with a temperature range of -55 to 125°C. Featuring tin finish contacts and glass-filled polyphenylene sulfide insulator, it offers high durability with 500 cycles and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting in black color housing.
S2B-EH(LF)(SN)
S2B-EH(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.098" pitch, 0.295" body length, and 0.165" body width. It features bright tin finish, POLYAMIDE66 insulator, and solder termination for right-angle mounting applications. Ideal for electronics requiring compact connectors with high reliability in tight spaces.
BM05B-SRSS-TBT(LF)(SN)
BM05B-SRSS-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 5 contacts, COPPER ALLOY material, and TIN finish. It is a STRAIGHT mounting style connector for surface mount applications in headers & edge type connectors category.
22-05-3041
The Molex 22-05-3041 is a board connector with mating contact pitch of 0.1", body length of 0.4", and body width of 0.25". It features matte tin over nickel termination, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right angle mounting solution with rectangular contact pattern on PCBs.
50-57-9006
The Molex 50-57-9006 is a board connector with mating contact pitch of 0.1". Featuring glass filled polyester insulator, it has 6 contacts and UL94V-0 flammability rating. Ideal for commercial applications, this plug-style connector offers crimp termination and locking mounting option.
TSW-103-07-T-S
Samtec's TSW-103-07-T-S is a 3-contact board connector with a pitch of 0.1". It features a body size of 0.3" x 0.098" x 0.1", made of PBT insulator material, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable connections on PCBs.
53313-3465
Molex 53313-3465 is a 34-contact board connector with TIN finish. Featuring 2 loaded rows, it has a terminal pitch of 2mm and UL94V-0 flammability rating. Ideal for applications requiring male contacts, solder termination, and straight mounting style.
DF11-10DP-2DSA(01)
The Hirose Electric DF11-10DP-2DSA(01) is a 10-contact board connector with 0.079" pitch, suitable for commercial applications. Featuring gold over nickel termination finish, it offers high durability with 50 cycles and insulation resistance of 1Gohm. With a dielectric voltage rating of 650VAC, this connector is ideal for PCB mounting in various electronic devices.
5055960401
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
DF11-10DP-2DSA(24)
DF11-10DP-2DSA(24) by Hirose Electric is a 10-contact, 2-row board connector with 0.079" pitch and 650VAC dielectric voltage. It features POLYAMIDE insulation, TIN finish, and operates b/w -30 to 85°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL certification.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-23-2021
Molex 22-23-2021 header connector features 0.1" mating contact pitch, 0.194" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with UL and CSA standards compliance.
22-23-2031
The Molex 22-23-2031 is a board connector with 3 male contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1G ohm, and body length of 0.294". It is used in commercial applications, with UL flammability rating of 94V-0 and termination via solder for reliability.
22-23-2041
The Molex 22-23-2041 is a board connector with 0.1" pitch, suitable for commercial applications. It features brass contacts with matte tin finish, white polyamide insulator, and 4 male pins in a rectangular pattern. The connector has a total of 4 contacts and offers high insulation resistance of 1000000000 ohm.
22-23-2051
The Molex 22-23-2051 is a board connector with 5 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and termination contact finish in matte tin over nickel. It is commonly used in commercial applications for PCB connections due to its rectangular contact pattern and solder termination type.
22-23-2061
The Molex 22-23-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring a reliable connection with solder termination and rectangular contact pattern.
22-23-2081
The Molex 22-23-2081 is a board connector with 8 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1Gohm. It has a body length of 0.794", body width of 0.25", and insulator material made from polyamide. This connector is commonly used in commercial applications requiring reliable connections on PCBs.
22-23-2071
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: UL;
22-23-2121
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
2223
Singatron Enterprise
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 2223; Terminal Pitch (mm): 2.54; MIL Conformity: NO;
22-23-2101
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulation Resistance: 1000000000 ohm;
22-23-5024
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
22-23-2111
The Molex 22-23-2111 is a board connector with 11 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1000000000 ohm. With a body length of 1.094", it is ideal for commercial applications requiring a reliable connection on PCBs with rectangular contact patterns.
22-23-2261
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
22-23-2141
The Molex 22-23-2141 is a board connector with 14 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1G ohm. It has a body length of 1.394", matte tin termination finish, and brass contact material. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
22-23-2181
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
22-23-2201
The Molex 22-23-2201 is a board connector with 20 contacts, 0.1" pitch, and 100u plating thickness. It features polyamide insulation, solder termination, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
22-23-5034
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Resistance: 10 mohm;
22-23-2131
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
22-23-3034
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
22-23-2042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Plating Thickness (inch): 60u;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved