Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 19433-0002 is a COMBINATION LINE CONNECTOR with 4 contacts, rated at 40A signal current. It has a body length of 0.935" and width of 0.865", suitable for cable mounting applications. With an operating temperature range from -40 to 120°C, it offers high insulation resistance of 20MOhm, meeting UL standards for commercial reliability.
Median Price
$3.907
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$2.610
100+ parts
-
1k+ parts
10k+ parts
RS Americas
Interstate Connecting
$3.426
$3.093
Mouser Electronics
$6.190
$4.400
$3.880
$3.630
DigiKey
$6.730
$4.764
$3.924
Digiode
$2.480
Nova Conductors
Vyrian
VNN
Corphita
$2.349
Argo Parts USA
Continental Prestige Electronics
$3.845
Netroflash
Andel Nordic
$15.580
$10.905
Perfect Parts
The compact body length makes this connector suitable for applications where space is limited.
With high insulation resistance, this connector ensures reliable and secure connections.
The slim body width allows for easy installation in tight spaces.
Having two rows loaded increases the connector's versatility for multiple signal connections.
The high maximum operating temperature makes this connector suitable for a wide range of environments.
The low minimum operating temperature ensures reliable performance in cold conditions.
With a high signal current rating, this connector can handle heavy-duty applications.
The connector's four contacts offer multiple connection options for increased flexibility.
The male contact gender provides a secure and reliable connection for various applications.
The straight mounting style simplifies installation and ensures a secure connection.
The crimp termination type allows for easy and efficient installation of the connector.
The commercial-grade reliability of this connector ensures long-lasting performance in various applications.
Combination Line Connectors 19433-0002 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
19433-0002 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Packaging - Mult Devs Cancel Packaging 06/Apr/2022 Mult Devs Packaging/Quantity 06/Apr/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Promax-johnton
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Cheng-yi Electronic
33482-6201
Molex
Molex 33482-6201 is a Combination Line Connector with dimensions 1.163" x 0.875" x 2.144". It has 12 contacts, male gender, and blade pin-skt style. Ideal for cable mounting applications requiring crimp termination in industries like automotive and electronics.
2377780-2
TE Connectivity
TE Connectivity's 2377780-2 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It features 4 loaded rows, operating temperatures from -40 to 120°C, and cable mounting type. Ideal for applications requiring polarized connectors at 115/230VAC mains rating.
AT06-2S-EC01
Amphenol
The Amphenol AT06-2S-EC01 is a female combination line connector with 2 contacts, rated for 13A signal current. Its compact dimensions of 0.591" x 0.72" x 1.232" make it suitable for cable mounting applications. With an operating temperature range of -55°C to 125°C, it utilizes polyethylene insulator material for reliable performance.
963598-1
TE Connectivity's 963598-1 is a Combination Line Connector with dimensions of 3.791" x 1.252" x 1.165". Featuring 68 contacts, rated at 20A, it operates b/w -40°C to 110°C. Ideal for cable mounting applications requiring polarized female connectors with a pitch of 4mm and row spacing of 0.157".
AT06-12SC-MM01
The Amphenol AT06-12SC-MM01 is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector features round pin-socket contact style.
DTM06-08SA-EE04
TE Connectivity's DTM06-08SA-EE04 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring UL-certified connectors with polarized design and strain relief option.
DT13-12PA-R015
TE Connectivity's DT13-12PA-R015 is a combination line connector with a body length of 2.298" and width of 5.62". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector, with its right angle mounting style and solder termination type, is commonly used in board applications requiring a polarized, male contact connector with 48 contacts.
DT04-12PA-CE03
TE Connectivity's DT04-12PA-CE03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 250V and 13A for signal current. With a temperature range of -55 to 125 °C, it is ideal for cable mounting applications requiring a polarized, UL-certified connector.
SMS36SE4K9
Esterline Technologies
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; IEC Conformity: NO; MIL Conformity: NO;
AT06-12SA-SRGRY
The Amphenol AT06-12SA-SRGRY is a 12-contact combination line connector with 2 rows, rated for 13A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector has dimensions of 1.772" x 0.827" x 1.713".
1717394-2
TE Connectivity's 1717394-2 is a Combination Line Connector with dimensions of 0.638" x 1.63" x 0.787". Rated for 12V, it has GLASS FILLED POLYPHENYLENE SULFIDE insulator and operates b/w -30 to 105°C. With 24 contacts, it is used in board mounting applications for male connectors with SQ PIN-SKT contact style.
1-1418390-1
TE Connectivity 1-1418390-1 is a Combination Line Connector with dimensions 1.693" x 1.012" x 1.23". Rated for 60V, it operates b/w -40°C to 140°C, suitable for cable mounting applications at up to 40A signal current.
SMS36SE3K9
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
DTP04-4P-E003
TE Connectivity's DTP04-4P-E003 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V, 25A signal current, and operating temperatures from -55 to 125°C. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
2103124-2
TE Connectivity's 2103124-2 is a Combination Line Connector with EMI shielding, male contact gender, and 2 contacts. It has a body length of 1.78", width of 1.59", and depth of 1.224". This connector is ideal for applications requiring reliable commercial-grade connections in straight mounting configurations.
DT13-48PABCD-R015
TE Connectivity's DT13-48PABCD-R015 is a 48-contact combination line connector with 2 rows, rated at 250V and 13A. With a body length of 2.298" and width of 5.62", it operates b/w -55°C to 125°C, making it ideal for board mounting applications requiring a polarized, right-angle male connector with solder termination.
2286003-3
TE Connectivity's 2286003-3 is a Combination Line Connector with dimensions of 1.244" x 0.591" x 0.622". It has a rated voltage of 48V, operating temperature range from -55 to 125°C, and UL flammability rating of 94V-0. Ideal for applications requiring a polarized connector with a signal current rating of 13A.
DT04-2P-E004
TE Connectivity's DT04-2P-E004 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
12010975
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Termination Type: CRIMP; Contact Style: RND PIN-SKT;
776164-4
TE Connectivity's 776164-4 is a Combination Line Connector with dimensions of 2.496" x 1.323" x 1.362". It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, UL Flammability Code 94V-0, and rated current of 17A. Ideal for applications requiring a polarized connector with 35 contacts and operating temperatures from -40°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
19433-0001
Molex 19433-0001 is a male plug combination line connector with 4 contacts, 0.935" body length, and 0.865" body width. It has an insulation resistance of 20 MOhm, operating temperature range from -40 to 120°C, and UL reference standard. Ideal for commercial applications requiring crimp termination on cables with locking mounting option.
194320002
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO;
194330013
Molex 194330013 is a 0.935" long Combination Line Connector with 2 contacts, male gender, and crimp termination. It offers high insulation resistance of 20MOhm and low contact resistance of 30mOhm. Ideal for commercial applications with operating temperatures from -40 to 120°C.
19432-0013
Molex 19432-0013 is a COMBINATION LINE CONNECTOR with 2 contacts, FEMALE gender, and RECEPTACLE body. It uses CRIMP termination on CABLE mounting. Ideal for automotive and industrial applications requiring reliable connectivity.
194330014
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 120;
19436-0411
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Body Depth: 1.292 inch; UL Flammability Code: 94V-0;
194320001
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
194320005
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; No. of Rows Loaded: 2; Body or Shell Style: RECEPTACLE;
19436-0412
The Molex 19436-0412 is a Combination Line Connector with dimensions of 1.951" x 1.318" x 2.204". It has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, operates b/w -40°C to 125°C, and UL Flammability Code of 94V-0. Ideal for applications requiring a male plug connector with crimp termination on cable and panel mounting.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved