Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
Median Price
$1.150
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Verical
1+ parts
$1.030
100+ parts
-
1k+ parts
$0.990
10k+ parts
$0.830
Mouser Electronics
$1.890
$1.370
$1.120
$0.940
DigiKey
$2.290
Master Electronics
$0.810
Newark
$1.270
TTI
$0.980
$0.910
Vyrian
Digiode
$1.387
DF Sales Co.
$1.600
VNN
Nova Conductors
Bristol Electronics
Corphita
$1.314
Andel Nordic
$5.956
$5.717
Perfect Parts
Continental Prestige Electronics
Netroflash
Argo Parts USA
Assembly Products 15-04-5201 attributes and parameters. Explore more Assembly Products devices from Molex
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
15-04-5201 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Packaging - Mult Devs Packaging 03/Feb/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200168
Molex
WIRE AND CABLE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vicor
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bytesonic Electronics
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
2200156
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
66103-4
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Design: LOOSE; Maximum Wire Size: 20 AWG; Assembly Item Name: CONTACT; Finish Thickness: 30;
9019190000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Minimum Wire Size: 12 AWG; Assembly Item Name: FERRULE; DIN Conformity: NO; Approvals (V): CSA; GOST; UL; VDE;
M23053/16-004-0
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
61030012010
Harting Electronics & Kg
The Harting Electronics & Kg 61030012010 is a metal HOOD for D-SUB CONNECTOR. It has a max operating temp of 90°C and min of -20°C. Mounting options include SCREW (#4-40).
1SNK900101R0000
Abb
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel;
1-66100-9
TE Connectivity
TE Connectivity's 1-66100-9 is a crimp terminal with a contact resistance of 7.5 mohm. It is designed for use in CPC/G, M series connectors and can handle a max operating temperature of 90°C. With a rated current of 13A, it is suitable for power and signal applications with wire sizes ranging from 18 AWG to 16 AWG.
1648382-1
TE Connectivity's 1648382-1 is a female power contact with solder terminal type, rated for 250V and 5A. Made of brass, it operates b/w -40 to 105°C, suitable for straight mounting in assembly products.
AT62-14-0122
Amphenol
CONNECTOR ACCESSORY;
1727040100
Molex 1727040100 BACKSHELL for FCT D-SUB features 0.118" to 0.335" cable entry, ZINC ALLOY material, and -35°C to 100°C operating temp. Mounting options include SCREW or 4-40 UNC. Ideal for securing cables in electronic assemblies.
13663717
Aptiv
7810.6412.0
2002-404
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; IEC Conformity: NO;
39-00-0077
The Molex 39-00-0077 is a contact assembly product with a crimp terminal type and chain contact design. It is commonly used with 5557, 30067, 44516, or 42474 connectors. With a max wire size of 16 AWG and a mounting style of straight, it is ideal for applications requiring reliable electrical connections.
10757690
Delphi Connection Systems
160773-6
TE Connectivity 160773-6 is a CRIMP terminal with wire gauge 15 AWG, suitable for DISCRETE WIRE cables. It has a contact gender of FEMALE and mounting style STRAIGHT, made of BRASS material. Operating temperature ranges from -40 to 110 °C, with cable entry ranging from 0.09 to 0.13 inch.
1062-16-0144
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
02-08-1001
Molex 02-08-1001 is a CRIMP FEMALE CONTACT with SQ PIN-SKT style made of BRASS. It is used in Assembly Products for STRAIGHT mounting applications.
SVM-61T-P2.0
J S T Mfg
SVM-61T-P2.0 by J S T Mfg is a male contact assembly product for VL connectors, with approvals from CSA, TUV, and UL. It features crimp terminals suitable for 20-14 AWG wires, rated at 20A and 600V AC/DC. Operating temperatures range from -25 to 90°C making it ideal for various applications requiring reliable electrical connections.
1062-20-0144
TE Connectivity 1062-20-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
15-04-5104
15-04-0292
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Material: GLASS FILLED POLYESTER; Assembly Item Name: POLARIZING KEY;
15-04-0211
CONNECTOR ACCESSORY; IEC Conformity: NO; Usage: 5557, 30067, 42474, 43760, 44516; Approvals (V): UL; DIN Conformity: NO; Assembly Item Name: KEYING ITEM;
15045401
15-04-0293
Assembly Items;
15045304
CONNECTOR ACCESSORY; Approvals (V): UL; Usage: 70066, 70400, 70430 AND 70450; MIL Conformity: NO; Material: POLYESTER; DIN Conformity: NO;
15-04-5061
The Molex 15-04-5061 clip item is approved by CSA and UL, with a temperature range of -40 to 105°C. Made of glass-filled polyester, it's used in applications like 70013, 8723B, and more for secure assembly.
15045101
15045301
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO;
15-04-5084
CONNECTOR ACCESSORY; DIN Conformity: NO; Usage: 70013, 8723B, 8724B, 70022, 70227 AND 70229; MIL Conformity: NO; Approvals (V): CSA; UL; IEC Conformity: NO;
15045501
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
15045204
CONNECTOR ACCESSORY; Approvals (V): UL; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Usage: 70066, 70400, 70430 AND 70450;
15045281
15-04-5264
CONNECTOR ACCESSORY; MIL Conformity: NO; Usage: 70013, 8723B, 8724B, 70022, 70227 AND 70229; Material: GLASS FILLED POLYESTER; Approvals (V): CSA; UL; Minimum Operating Temperature: -40 Cel;
15-04-5244
CONNECTOR ACCESSORY; Usage: 70013, 8723B, 8724B, 70022, 70227 AND 70229; DIN Conformity: NO; Minimum Operating Temperature: -40 Cel; Approvals (V): CSA; UL; Assembly Item Name: CLIP ITEM;
15045161
15045221
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO;
15045224
CONNECTOR ACCESSORY; Approvals (V): UL; Assembly Item Name: CLIP ITEM; DIN Conformity: NO; Material: POLYESTER; IEC Conformity: NO;
15-04-5212
CONNECTOR ACCESSORY; Assembly Item Name: CLIP ITEM; DIN Conformity: NO; Minimum Operating Temperature: -40 Cel; Usage: 70104, 70563, 70565, 70573 AND 70575; MIL Conformity: NO;
15-04-5242
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Usage: 70104, 70563, 70565, 70573 AND 70575; MIL Conformity: NO; DIN Conformity: NO; Material: GLASS FILLED POLYESTER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved