Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Assembly Items;
Median Price
$0.087
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$0.032
100+ parts
$0.018
1k+ parts
$0.014
10k+ parts
-
Verical
$0.058
Mouser Electronics
$0.150
$0.110
$0.083
$0.072
DigiKey
$0.220
$0.126
$0.098
$0.079
PEI Genesis
NEP Electronics
Chip1Stop
$0.084
Master Electronics
$0.120
Farnell
$0.157
Powell Electronics
$0.059
TTI
$0.080
$0.070
$0.066
Digiode
$0.030
TestEquity
Nova Conductors
$0.086
IBS Electronics
$0.081
TME
Vyrian
VNN
FDH Electronics
Corphita
$0.029
Argo Parts USA
Continental Prestige Electronics
Andel Nordic
$5.307
$5.094
Assy Fe
Kepictronics
Authorized Procurement Solutions
Bastille Electronics
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Vicor
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Space Power Electronics
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
12048074
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT; IEC Conformity: NO; Assembly Item Name: CONTACT;
D38999/33Z19R
TE Connectivity
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Material: METAL; Maximum Operating Temperature: 175 Cel; Minimum Operating Temperature: -65 Cel; Shell Sizes: 19;
AT60-12-0166
Amphenol
CONNECTOR ACCESSORY;
0462-201-1631
TE Connectivity's 0462-201-1631 contact features a CRIMP terminal type, MACHINED contact design, and can handle temperatures from -55 to 150 °C. Ideal for applications requiring a FEMALE ROUND PIN-SOCKET contact style with wire sizes ranging from 20 to 16 AWG and rated current of 13 A.
770678-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
50-29-1900
Molex
The Molex 50-29-1900 is a brass contact with compression style, suitable for 7880 Series Housing. It supports wire sizes from 30 AWG to 24 AWG and has a 0.06 inch cable entry. The terminal length is 0.186 inch, making it ideal for straight mounting applications.
02-08-1002
Molex 02-08-1002 is a CRIMP terminal with STRAIGHT contact design, made of BRASS. It operates b/w -55 to 105 °C and can handle up to 5000V AC. Ideal for SIGNAL applications, it accommodates wire sizes from 20 AWG to 14 AWG, featuring FEMALE gender and ROUND PIN-SOCKET style contacts.
5227
Keystone Electronics
1SNK150051R0000
TERMINAL BLOCK ACCESSORY; Mounting Style: RIGHT ANGLE; Insulator Material: POLYAMIDE; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
1-66101-9
TE Connectivity's 1-66101-9 is a crimp terminal contact designed for CPC/G Series/M Series connectors. With a finish thickness of 100, it can handle wire gauges ranging from 16 AWG to 18 AWG and has a rated current of 13 A. This connector accessory is made of brass and is suitable for power and signal applications.
16-02-0082
Molex 16-02-0082 CONTACT features CRIMP terminal type, COPPER ALLOY material, and FEMALE contact gender. With a rated current of 3A and max operating temperature of 105°C, it is ideal for applications requiring a reliable connection in assemblies with wire sizes ranging from 30 to 24 AWG.
4-1437284-3
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel;
09200030301
Harting Electronics & Kg
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: HOUSING; Maximum Operating Temperature: 125 Cel;
0460-202-20141
TE Connectivity's 0460-202-20141 contact features crimp terminal type, machined contact design, and 20 AWG wire gauge. Ideal for power applications with a rated current of 7.5A, operating b/w -55°C to 125°C.
2170704-5
TE Connectivity's 2170704-5 is a QSFP28 cable assembly with UL approval. It features compliant fit terminals, operating from -40 to 85°C. Designed for signal transmission, it uses nickel silver alloy material and supports up to 0 AWG wire size.
828920-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
114017
TE Connectivity 114017 is a male contact sealing item designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG in thermoplastic material. Ideal for assembly products requiring reliable connections in various environments.
0-0281934-4
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG;
DF14-3032SCFA
Hirose Electric
DF14-3032SCFA by Hirose Electric is a crimp contact assembly product with UL approval. It features bellowed female contacts for 32-30 AWG wires, suitable for UL1571 cables. The straight mounting style and phosphor bronze material make it ideal for various electronic applications.
1-66100-9
TE Connectivity's 1-66100-9 is a crimp terminal with a contact resistance of 7.5 mohm. It is designed for use in CPC/G, M series connectors and can handle a max operating temperature of 90°C. With a rated current of 13A, it is suitable for power and signal applications with wire sizes ranging from 18 AWG to 16 AWG.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
15-04-5104
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
15-04-0292
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Material: GLASS FILLED POLYESTER; Assembly Item Name: POLARIZING KEY;
15-04-0211
CONNECTOR ACCESSORY; IEC Conformity: NO; Usage: 5557, 30067, 42474, 43760, 44516; Approvals (V): UL; DIN Conformity: NO; Assembly Item Name: KEYING ITEM;
15045401
15045304
CONNECTOR ACCESSORY; Approvals (V): UL; Usage: 70066, 70400, 70430 AND 70450; MIL Conformity: NO; Material: POLYESTER; DIN Conformity: NO;
15-04-5061
The Molex 15-04-5061 clip item is approved by CSA and UL, with a temperature range of -40 to 105°C. Made of glass-filled polyester, it's used in applications like 70013, 8723B, and more for secure assembly.
15045101
15045301
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO;
15-04-5084
CONNECTOR ACCESSORY; DIN Conformity: NO; Usage: 70013, 8723B, 8724B, 70022, 70227 AND 70229; MIL Conformity: NO; Approvals (V): CSA; UL; IEC Conformity: NO;
15045501
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
15045204
CONNECTOR ACCESSORY; Approvals (V): UL; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Usage: 70066, 70400, 70430 AND 70450;
15045281
15-04-5264
CONNECTOR ACCESSORY; MIL Conformity: NO; Usage: 70013, 8723B, 8724B, 70022, 70227 AND 70229; Material: GLASS FILLED POLYESTER; Approvals (V): CSA; UL; Minimum Operating Temperature: -40 Cel;
15-04-5244
CONNECTOR ACCESSORY; Usage: 70013, 8723B, 8724B, 70022, 70227 AND 70229; DIN Conformity: NO; Minimum Operating Temperature: -40 Cel; Approvals (V): CSA; UL; Assembly Item Name: CLIP ITEM;
15-04-5201
15045161
1504-0018A4
1504-0019A4
15-04-0297
CONNECTOR ACCESSORY; Usage: CONNECTOR; DIN Conformity: NO; Material: POLYAMIDE66; Approvals (V): UL; MIL Conformity: NO;
15-04-0220
CONNECTOR ACCESSORY; DIN Conformity: NO; Usage: 2139 CRIMP TERMINAL, 2145 PC BOARD CONNECTOR; Assembly Item Name: POLARIZING KEY; Insulator Material: NYLON; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved