Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Median Price
$15.317
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$7.039
100+ parts
$6.427
1k+ parts
-
10k+ parts
Mouser Electronics
$14.980
$11.960
$11.380
Adafruit Industries
$15.654
DigiKey
$19.210
$14.204
$12.384
RS Americas
$25.030
$21.030
$19.520
Verical
$14.324
PEI Genesis
Chip1Stop
$23.300
Powell Electronics
$9.640
Digiode
$4.874
Kempston Controls
$7.020
TME
$8.080
$6.820
Nova Conductors
$16.889
TestEquity
$21.050
VNN
NAC Semi
$9.350
$8.630
IBS Electronics
$10.743
ACDS - Activité Composants Distribution Service
Vyrian
Semicontronic
$4.360
$4.251
$4.229
Aztec Data Supply Inc.
$4.501
Corphita
$4.617
Continental Prestige Electronics
$16.618
$16.286
Netroflash
$16.045
$15.707
Andel Nordic
$29.020
$20.314
Argo Parts USA
Assy Fe
GreenTree Electronics
Eastek
Other Function Circular Connectors 1200270066 attributes and parameters. Explore more Other Function Circular Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
1200270066 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
PCN Design/Specification - Multiple Devices Marking 20/Feb/2020
PCN Assembly/Origin - Multiple Devices Additional Tooling 13/Jun/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Microchip Technology
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Toshiba
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
Boca Semiconductor
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
15544899
Delphi Connection Systems
CIRCULAR CONNECTOR; Manufacturer Series: 15544899;
HD34-24-31PT
TE Connectivity
TE Connectivity's HD34-24-31PT is a circular connector with 31 contacts, rated at 250V and 13A. With a body size of 1.647" x 2" x 1.875", it operates b/w -55°C to 125°C. This polarized male connector made of aluminum alloy is ideal for panel mounting applications requiring solid backshell protection and strain relief.
1456022
Phoenix Contact
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1437025
FGG.0B.303.CYCD52Z
Lemo Usa
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
HR10A-10R-12P(74)
Hirose Electric
HR10A-10R-12P(74) by Hirose Electric is a circular connector with 12 contacts, gold contact finish, and snap coupling type. Ideal for panel mounting applications, it features a nickel-plated shell made of zinc alloy and brass. Termination is solder-based, suitable for male connectors in receptacle style shells.
206226-1
Tyco Electronics Amp
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Shell Size: 23; Coupling Type: THREADED;
HDP24-24-9PN
TE Connectivity's HDP24-24-9PN is a circular connector with 9 contacts, rated at 250V and 100A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a male receptacle connector with solid backshell, such as in panels for mains connectors at 115/230VAC.
KV70
Lumberg Connect
KV70 by Lumberg Connect is a circular connector with 7 contacts, gold flash finish, and polyamide insulator. It features a threaded coupling type, solid backshell, and solder termination for female contact gender. With an operating temperature range of -40 to 85°C, it is ideal for commercial applications requiring high insulation resistance and filter feature.
1694224
The Phoenix Contact 1694224 is a threaded circular connector with gold termination finish. It has 5 contacts, UL reference standard, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring solid backshell and male plug connectors.
1300170015
Molex
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
M12A-08PFFP-SF8001
Amphenol
033208-1
The Lumberg Connect 033208-1 is a circular connector with gold flash termination, glass-filled polyamide insulator, and threaded coupling. It has an insulation resistance of 10^10 ohm and operates b/w -40 to 85°C. Ideal for commercial applications requiring reliable signal transmission at up to 5A current.
796094-2
TE Connectivity 796094-2 is a threaded circular connector with 600V rated voltage. Made of polyamide, it operates b/w -55 to 105°C. Ideal for immersion-resistant applications, this female connector has 4 contacts and a UL flammability rating of 94V-0.
T4040034041-000
TE Connectivity's T4040034041-000 Circular Connector features EMI shielding, operating temperatures from -40 to 85°C, and a rated signal current of 3A. Ideal for applications requiring a polarized male connector with 4 contacts in a nickel-finished brass shell.
UTG0128S
Esterline Technologies
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Body Diameter: .748 inch; Body or Shell Style: RECEPTACLE;
M8S-04PMMR-SF8001
The Amphenol M8S-04PMMR-SF8001 is a threaded circular connector with 4 contacts, glass-filled polyamide insulator, and nickel shell finish. It operates b/w -40 to 105°C, suitable for waterproof applications in various industries like automotive and industrial machinery.
T4171320008-001
TE Connectivity's T4171320008-001 circular connector has 8 contacts, rated for 2A signal current at 30V. With a shell size of 18 and nickel finish, it is ideal for applications requiring a female receptacle with polarization key and preassembled design.
ABD-04PMFS-LC7001
CIRCULAR CONNECTOR;
AHDP04-24-21PN-WTA
The Amphenol AHDP04-24-21PN-WTA is a circular connector with 21 contacts, made of polyethylene. It has a body diameter of 1.579" and depth of 1.634", suitable for use in applications requiring a male receptacle connector with operating temperatures ranging from -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1200700056
Other Circular Connectors; Mating Contact Finish: NOT APPLICABLE; Contact Material: NOT APPLICABLE;
1200710045
1200710041
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1200710035
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: CSA; UL; Body Depth: 2.36 inch; Termination Type: WIRE;
1200710043
1200900020
Molex 1200900020 is a threaded circular connector with nickel finish, brass shell material, and 3 male contacts. It is a receptacle type connector for cable mounting applications with solid backshell. Ideal for use in various electronic devices requiring reliable signal transmission.
1200060014
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1200060023
1200270070
1200860102
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1200715011
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1200910001
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Backshell Type: SOLID; Total No. of Contacts: 3; Mixed Contacts: NO;
1200270090
1200650951
1200060649
1200835010
1200860191
1200910010
1200060018
Other Circular Connectors; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
1200270133
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved