Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
Median Price
$32.820
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Sager
1+ parts
$21.960
100+ parts
$20.270
1k+ parts
$19.760
10k+ parts
-
Verical
$25.150
$21.790
Chip1Stop
$28.500
$18.400
$17.800
Newark
$35.250
$33.180
TTI
Mouser Electronics
$36.770
$30.460
RS (Exports)
$39.620
$30.500
RS Americas
DigiKey
$42.170
$30.467
$28.562
PEI Genesis
Master Electronics
$30.390
Arrow
$27.490
$27.214
Powell Electronics
$29.010
Kempston Controls
$12.150
TME
$12.360
$9.830
Nova Conductors
$27.646
Carlton-Bates
$28.370
Component Electronics Inc.
$30.000
$22.500
$19.500
TestEquity
$31.590
Digiode
$33.820
VNN
Vyrian
NAC Semi
$11.730
IBS Electronics
$35.886
Bristol Electronics
Inventory MP
Aztec Data Supply Inc.
$4.857
Modulus Dynamics
$6.459
Andel Nordic
$6.848
$6.574
Advanced Electronics
$8.779
$8.340
Semicontronic
$23.330
$22.747
$22.630
Continental Prestige Electronics
$27.230
$26.685
Netroflash
Corphita
$32.040
Robosynatics
$0.185
Lucentia Tech
GreenTree Electronics
Perfect Parts
Abacus Technologies
Argo Parts USA
EMSNET (Excess)
Assy Fe
Eastek
Other Function Circular Connectors 1200710045 attributes and parameters. Explore more Other Function Circular Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
1200710045 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
1554216002
Molex
WIRE AND CABLE;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
EU2B-YS3103F
Idec
ROTARY SWITCH;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
1301880034
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1440669
Phoenix Contact
CIRCULAR CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD OVER NICKEL;
SLPPA25BSR3
Amphenol
The Amphenol SLPPA25BSR3 is a circular connector with SNAP coupling, suitable for temperatures ranging from -40 to 125°C. Featuring a solid backshell and environment-resistant design, it is ideal for cable mounting applications requiring male contact gender and plug body style.
KV40
Lumberg Connect
KV40 by Lumberg Connect is a circular connector with gold flash termination, polyamide insulator, and nickel-plated shell. With 4 contacts rated at 5A, it has an insulation resistance of 10^10 ohm and operates b/w -40 to 85°C. Ideal for commercial applications requiring reliable signal transmission in threaded coupling setups.
1436974
Phoenix Contact 1436974 is a circular connector with 0.65" body diameter, gold termination finish, and polyamide66 insulator. It operates b/w -25°C to 85°C, suitable for environment-resistant applications. With threaded coupling and solder termination, it has 8 contacts for board and panel mounting.
HDP24-18-6PN-L017
TE Connectivity
TE Connectivity's HDP24-18-6PN-L017 is a circular connector with a body size of 1.762" x 1.75" x 1.625". It has a rated voltage of 250V and can handle a max operating temperature of 125°C. This connector, with its solid backshell and polarized design, is commonly used in applications requiring a male receptacle for signal currents up to 100A.
1838893-2
TE Connectivity's 1838893-2 is a threaded circular connector with preassembled contacts. It has a max operating temperature of 90°C and can handle up to 5A signal current. Ideal for applications requiring a male plug with polarized key, solder termination, and solid backshell in panel mounting setups.
SLPPA25BSB
The Amphenol SLPPA25BSB is a circular connector with SNAP coupling, suitable for temperatures ranging from -40 to 125°C. Featuring a solid backshell and environment-resistant design, it is ideal for cable mounting applications requiring male contact gender. Compliant with UL standards, this connector has a body depth of 0.89 inch.
41-40022
Conec
CIRCULAR CONNECTOR;
KV70
KV70 by Lumberg Connect is a circular connector with 7 contacts, gold flash finish, and polyamide insulator. It features a threaded coupling type, solid backshell, and solder termination for female contact gender. With an operating temperature range of -40 to 85°C, it is ideal for commercial applications requiring high insulation resistance and filter feature.
HDP24-24-21PE-L015
TE Connectivity's HDP24-24-21PE-L015 is a circular connector with 21 contacts, rated at 250V and 25A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized male connector with UL certification and solid backshell mounting on panels.
1977886-1
TE Connectivity 1977886-1 is a threaded circular connector with 37 contacts, rated at 600V. Made of polyamide, it operates b/w -55 to 105°C and is UL-certified for immersion resistance. Ideal for applications requiring a male receptacle with straight mounting and screw option in panel installations.
YHDP24-24-21PEL024
YHDP24-24-21PEL024 by TE Connectivity is a circular connector with 21 contacts, rated for 250V and 25A. It features GLASS FILLED POLYAMIDE insulator material, UL Flammability Code of 94V-0, and operates b/w -55 to 125 °C. Ideal for applications requiring a male contact gender, panel mounting type, and solid backshell design.
15.0306
Staeubli Electrical Connectors Ag
4-2399609-8
TE Connectivity 4-2399609-8 is a circular connector with rated voltage of 1000V and operating temperature range from -40 to 140°C. It has a UL flammability rating of 94V-0, suitable for applications requiring high current signal transmission up to 500A. Ideal for panel mounting in various industries.
1411929
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1300170020
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
211882-1
TE Connectivity 211882-1 is a threaded circular connector with polyethylene insulator, rated at 600V. It has 4 contacts, operates b/w -55 to 105°C, and is UL certified for applications requiring a polarized male plug with solid backshell for cable mounting.
HDP26-24-23SN-L015
TE Connectivity's HDP26-24-23SN-L015 circular connector features 23 contacts, GLASS FILLED POLYAMIDE insulator, and 13A signal current rating. With a body size of 2.183" x 1.95" x 1.95", it is ideal for applications requiring a polarized, UL-rated connector with strain relief mounting for temperatures ranging from -55 to 125°C.
SLPPB35BSB4EH
The Amphenol SLPPB35BSB4EH circular connector features a body depth of 1.142", SNAP coupling type, and operating temperatures from -40°C to 125°C. Ideal for applications requiring an environment-resistant solid backshell, this UL-certified male plug connector is designed for cable mounting with crimp termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1200700056
Other Circular Connectors; Mating Contact Finish: NOT APPLICABLE; Contact Material: NOT APPLICABLE;
1200710041
1200710035
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: CSA; UL; Body Depth: 2.36 inch; Termination Type: WIRE;
1200270066
1200710043
1200900020
Molex 1200900020 is a threaded circular connector with nickel finish, brass shell material, and 3 male contacts. It is a receptacle type connector for cable mounting applications with solid backshell. Ideal for use in various electronic devices requiring reliable signal transmission.
1200060014
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1200060023
1200270070
1200860102
1200715011
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1200910001
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Backshell Type: SOLID; Total No. of Contacts: 3; Mixed Contacts: NO;
1200270090
1200650951
1200060649
1200835010
1200860191
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1200910010
1200060018
Other Circular Connectors; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
1200710071
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved