Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
105313-1106 by Molex is a rectangular power connector with 6 contacts, TIN over nickel finish. Made of liquid crystal polymer, it has male gender contacts for solder termination. UL 94V-0 rated, it's used in board mounting applications for power connections.
Median Price
$1.410
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.020
1k+ parts
$0.867
10k+ parts
$0.773
DigiKey
-
$0.910
$0.774
Element14
$1.526
Farnell
$1.540
$0.777
$0.726
Newark
$1.960
Verical
$1.371
$1.107
Powell Electronics
$0.840
$0.710
Chip1Stop
$1.550
$1.200
$1.170
Arrow
$0.913
$0.864
TTI
$0.870
$0.770
Nova Conductors
Digiode
$1.378
TME
$1.280
$1.010
IBS Electronics
$0.852
$0.828
$0.648
Vyrian
VNN
Netroflash
$1.000
Corphita
$1.305
Assy Fe
Perfect Parts
This finish provides excellent conductivity and corrosion resistance, ensuring a reliable connection over time.
Liquid crystal polymer is a high-performance material known for its durability, heat resistance, and electrical insulating properties, making it ideal for power connectors.
Rectangular power connectors are versatile and designed for high current applications, providing a secure and efficient power transfer.
A flammability rating of 94V-0 indicates that the connector is self-extinguishing and resistant to catching fire, ensuring safety in use.
Having 6 contacts allows for multiple connections within a single connector, increasing the functionality and versatility of the product.
Board mounting offers a secure and stable installation on a circuit board, ensuring a reliable connection for power transfer.
Solder termination provides a strong and permanent connection, ideal for high current applications that require durable and reliable connections.
Male contacts are typically used for providing power, making this connector suitable for applications where power transmission is required.
Power Connectors 105313-1106 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
105313-1106 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Supplier 28/Feb/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
General Semiconductor
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Zetex Plc
1723101103
Molex
Molex 1723101103 is a rectangular power connector with liquid crystal polymer insulator. It has a rated current of 14A and operates b/w -40 to 120°C. Ideal for board mounting, it features male SQ pin-skt contacts and is UL 94V-0 compliant.
39-29-0023
Molex 39-29-0023 is a rectangular power connector with 2 contacts, made of brass and polyamide66. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
39-30-1081
Molex 39-30-1081 is a rectangular power connector with 8 contacts, featuring matte tin finish and polyamide66 insulator. Withstanding voltage of 1500VAC, it operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability over 30 cycles.
43020-0401
The Molex 43020-0401 is a rectangular power connector with 4 contacts, made of nylon insulator material. It has a temperature range from -40 to 105°C and UL flammability rating of 94V-0. Ideal for commercial applications, it features crimp termination and straight mounting with locking latch option.
ATP04-2P-PM07GEC
Amphenol
Power Connectors; No. of Rows Loaded: 1;
43045-0200
Molex 43045-0200 is a rectangular power connector with LCP insulator, brass contacts, and bright tin finish. It has 2 rows, rated for 5A signal current, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
1-1123722-7
TE Connectivity
TE Connectivity 1-1123722-7 is a RECTANGULAR POWER CONNECTOR with 7 contacts, rated at 8A and 250V. Featuring POLYAMIDE66 insulation material, it has a dielectric voltage of 1500VAC and operates b/w -25 to 105°C. Ideal for board mounting applications requiring high durability and reliability in commercial settings.
1330
Anderson Power Products
1330 by Anderson Power Products is a rectangular power connector with UL 94V-0 flammability code. It has 1 contact and supports crimp and solder termination. This hermaphroditic connector is commonly used in cable applications.
IPL1-102-01-L-D-RA-K
Samtec
Samtec IPL1-102-01-L-D-RA-K is a rectangular power connector with 4 contacts, liquid crystal polymer insulator, and tin over nickel termination. It is used in commercial applications for board mounting and solder termination.
43020-0200
Molex 43020-0200 is a rectangular power connector with PBT-POLYESTER insulator, suitable for commercial use. Features include 2 rows, 105°C max operating temp, and -40°C min operating temp. Ideal for cable and panel mounting applications.
2004530005
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
39-01-2220
The Molex 39-01-2220 is a rectangular power connector with a body length of 1.866", body width of 0.46", and body depth of 0.77". It has an insulation resistance of 1,000,000,000 ohm and a dielectric withstand voltage of 1500VAC. This connector is commonly used in cable applications and has a contact arrangement of S0P22.
794192-1
TE Connectivity's 794192-1 Power Connector has a rated voltage of 600V, insulator material POLYAMIDE, and operates b/w -55 to 105°C. Ideal for power applications, it features UL certification, crimp termination type, and a total of 8 contacts in a plug body style.
43650-0303
The Molex 43650-0303 is a rectangular power connector with insulation resistance of 1G ohm, dielectric voltage of 1000VAC, and operating temperature range from -40 to 105°C. It is used for board and cable mounting applications, featuring a male contact gender, solder termination type, and right angle mounting style.
39-01-2041
Molex 39-01-2041 is a rectangular power connector with 4 contacts, made of brass. It has a mating contact pitch of 0.165", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications requiring durability up to 30 cycles.
1720650002
Molex 1720650002 is a rectangular power connector with liquid crystal polymer insulator. It offers 2200VAC dielectric voltage, -40 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male contacts in board mounting configurations.
91999-1249
The Molex 91999-1249 is a rectangular power connector with insulator material POLYAMIDE. It has 3 contacts, male gender, and blade pin-skt contact style. Suitable for board mounting with solder termination, it operates b/w -20 to 120°C and offers high insulation resistance of 10^7 ohm.
2018460040
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: COPPER ALLOY; Mating Contact Finish: NOT SPECIFIED;
39-30-0080
The Molex 39-30-0080 is a rectangular power connector with 8 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. Ideal for board mounting applications, it has a temperature range from -40 to 105°C and durability of 30 cycles.
350214-1
TE Connectivity's 350214-1 is a RECTANGULAR POWER CONNECTOR with 16 contacts, rated at 12A. It has a body size of 1.68"x0.785"x0.375" and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring male solder terminals in power connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1053071202
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1053081204
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1053081208
Molex 1053081208 is a rectangular power connector with 8 female contacts. It has 0.5" x 0.395" x 0.618" dimensions and uses POLYAMIDE insulator material. Ideal for cable mounting, it operates at -40°C, complies with UL 94V-0 flammability code, and meets CSA and UL standards.
1053101108
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1053081206
1053091102
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
1053131102
1053071204
The Molex 1053071204 is a rectangular power connector with a polyamide insulator material. It has 4 contacts and a female contact gender. This connector is commonly used in cable applications for its crimp termination type.
105309-1103
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
105310-1204
Molex 105310-1204 Power Connector features Liquid Crystal Polymer insulator, rated for 7.5A signal current. With UL94V-0 flammability rating, it operates from -40 to 115°C. Ideal for board mounting applications with male SQ pin-skt contacts.
105313-2108
105313-2108 by Molex is a rectangular power connector with 8 contacts, TIN over nickel finish. Made of liquid crystal polymer, it has male gender contacts for solder termination. UL 94V-0 rated, it's used in board mounting applications for power connectivity.
105307-1203
Power Connectors;
1053081210
1053081212
1053082204
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
105313-1202
105313-2203
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
105307-1205
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: NANO-FIT, POLARIZED; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
1053091202
Molex 1053091202 is a RECTANGULAR POWER CONNECTOR with TIN OVER NICKEL finish. Made of LIQUID CRYSTAL POLYMER, it has 2 contacts and UL 94V-0 rating. Ideal for BOARD mounting, SOLDER termination, and MALE contact gender in power applications.
1053101106
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: TIN OVER NICKEL; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved