Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 0430450400 is a rectangular power connector with 4 contacts made of brass. It features TIN over nickel termination finish and polyethylene insulator material. Ideal for board mounting applications requiring male contact gender, UL 94V-0 flammability rating.
Median Price
$0.669
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.556
100+ parts
-
1k+ parts
$0.466
10k+ parts
$0.440
Heilind Electronics
$0.605
$0.516
$0.501
Sager
$0.622
$0.561
Arrow
$1.407
$1.008
$0.894
$0.733
TTI Europe
$0.557
$0.509
$0.495
Verical
$0.758
$0.703
$0.617
TTI
$0.940
$0.820
$0.750
Freelance Electronics
$0.522
Vyrian
$0.550
Digiode
$0.598
Component Electronics Inc.
$1.150
$0.870
Pegasus Components GmbH
J2 Sourcing AB
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
Prism Electronics
Corphita
$0.567
Authorized Procurement Solutions
EMSNET (Excess)
Glotronic Ltd.
Aranea Global
The Tin over Nickel finish provides excellent durability and corrosion resistance, ensuring a reliable connection over time.
Polyethylene is known for its high dielectric strength and resistance to chemicals, making it a suitable choice for insulating power connectors.
Rectangular power connectors are versatile and commonly used in various applications, providing a secure and stable connection.
Brass is a highly conductive metal with good resistance to corrosion, ensuring efficient power transfer and durability.
UL94V-0 is the highest flammability rating, indicating that the connector is self-extinguishing and safe to use in challenging environments.
Having 4 contacts allows for multiple connections within a single connector, making it suitable for applications requiring multiple power sources.
Board mounting provides a secure and stable connection, ideal for applications where the connector needs to be fixed to a circuit board.
Solder termination ensures a strong and reliable connection, especially in high-vibration environments where other termination methods may not be as effective.
Male connectors are typically used as the plug end, providing a secure connection that is less likely to come loose or disconnect accidentally.
Power Connectors 0430450400 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
0430450400 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
Vishay Telefunken
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
STMicroelectronics
647845-7
TE Connectivity 647845-7 is a RECTANGULAR POWER CONNECTOR with POLYCARBONATE insulator. It has a rated voltage of 600V, operating temperature range from -20 to 105 °C. Ideal for power applications requiring crimp termination and cable mounting with wire sizes ranging from 12 to 6 AWG.
03-06-1038
Molex
Molex 03-06-1038 is a rectangular power connector with 0.145" mating contact pitch, 1500VAC dielectric voltage, and -40 to 105°C operating temperature range. Ideal for commercial applications requiring a polarized housing, it has 3 contacts, crimp termination, and supports wire sizes from 30 to 18 AWG.
39-01-3049
The Molex 39-01-3049 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 0.165" mating contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable wire termination in a polarized lock mounting configuration.
43640-0200
The Molex 43640-0200 is a rectangular power connector with 2 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates in temperatures from -40 to 105°C. Ideal for cable and panel mounting applications requiring durable crimp terminations.
350720-4
TE Connectivity's 350720-4 is a rectangular power connector with 9 contacts, POLYAMIDE insulator, and UL94V-0 flammability rating. It operates b/w -55 to 125°C, suitable for commercial applications requiring durable crimp terminations in cable mounting setups.
39-30-1160
The Molex 39-30-1160 is a rectangular power connector with 16 contacts, featuring a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. It is used in board mounting applications with a temperature range from -40 to +105°C, suitable for commercial reliability requirements.
1645526-1
TE Connectivity 1645526-1 is a RECTANGULAR POWER CONNECTOR with 4 contacts, rated for 250V and 16A. Made of POLYESTER, it operates b/w -55 to 125 °C. Ideal for board mounting applications requiring a press fit termination in a right angle male contact pattern.
39-30-1081
Molex 39-30-1081 is a rectangular power connector with 8 contacts, featuring matte tin finish and polyamide66 insulator. Withstanding voltage of 1500VAC, it operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability over 30 cycles.
39-29-1047
The Molex 39-29-1047 is a rectangular power connector with 4 contacts, made of brass and polyamide insulator. It has a dielectric voltage of 2200VAC, operates b/w -40 to 105°C, and offers durability for up to 30 cycles. Ideal for board mounting applications requiring reliable commercial-grade power connections.
43020-1200
Molex 43020-1200 is a rectangular power connector with 12 contacts, PBT-POLYESTER insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, suitable for commercial applications requiring male crimp connectors in cable and panel mounting setups.
03-06-2092
Molex 03-06-2092 is a rectangular power connector with POLYAMIDE insulator, suitable for commercial use. Featuring 9 contacts in a 0.59" x 0.59" x 0.75" body, it operates b/w -40°C to 105°C. Ideal for cable mounting with crimp termination, this connector offers locking mounting option and UL94V-2 flammability rating.
B2P3-VH(LF)(SN)
J S T Mfg
B2P3-VH(LF)(SN) by J S T Mfg is a RECTANGULAR POWER CONNECTOR with 2 contacts, rated at 7A. It features BRASS contacts with Tin finish and POLYAMIDE66 insulator material. Ideal for board mounting applications, operating b/w -25 to 85°C.
2008750004
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
66484-001
Dupont Electronics
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; Insulator Material: POLYAMIDE; Additional Features: COMPATIBLE CONTACTS: 76146-001; 76146-003; 76148-001; 76148-003; 76150-001;
39-01-2086
The Molex 39-01-2086 is a rectangular power connector with a body length of 0.789 inch, body width of 0.46 inch, and body depth of 0.94 inch. It has an insulation resistance of 1000000000 ohm and a dielectric withstand voltage of 2200VAC. This connector is commonly used in panel mounting applications and has a durability of 30 cycles.
350539-1
TE Connectivity 350539-1 is a Power Connector with dimensions of 0.515" x 0.375" x 0.33". It has Tin termination, rated for 12A current. Ideal for board mounting applications in electronics, it meets UL, CSA, and V standards.
43045-2400
The Molex 43045-2400 is a rectangular power connector with 24 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.
09-93-0600
Molex 09-93-0600 is a rectangular power connector with 6 contacts, made of POLYAMIDE. It has UL Flammability Code 94V-2 and features female contact gender. Ideal for cable mounting applications requiring crimp termination.
203540-1
TE Connectivity's 203540-1 is a RECTANGULAR POWER CONNECTOR with 14 contacts, rated at 250V and 13A. With dimensions of 1.25" x 0.62" x 0.49", it operates b/w -55 to 150°C. Ideal for power applications requiring male wire termination on panels with screw mounting option.
39-03-6060
Molex 39-03-6060 is a rectangular power connector with 6 contacts, insulation resistance of 1Gohm, and dielectric voltage of 2100VAC. It is used in commercial applications for cable mounting with crimp termination, featuring a female contact gender and natural insulator color.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0430450818
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; DIN Conformance: NO; Filter Feature: NO;
0430452018
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 20; DIN Conformance: NO; Mixed Contacts: NO;
0430451418
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; UL Flammability Code: 94V-0; Mating Contact Finish: NOT SPECIFIED;
0430450609
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Contact Material: BRASS; Empty Shell: NO;
0430450613
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Insulator Material: POLYETHYLENE; Mixed Contacts: NO;
0430451002
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 10; Mixed Contacts: NO; Contact Material: NOT SPECIFIED;
0430451600
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYETHYLENE; Total No. of Contacts: 16; Additional Features: MICRO-FIT 3.0, POLARIZED, SHROUDED;
0430450409
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 4; MIL Conformity: NO; Mixed Contacts: NO;
0430450809
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; UL Flammability Code: 94V-0; JESD-609 Code: e3;
0430450212
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Insulator Material: POLYETHYLENE; IEC Conformity: NO;
0430450418
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN OVER NICKEL; Insulator Material: POLYETHYLENE; Empty Shell: NO;
0430450802
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mixed Contacts: NO; Empty Shell: NO;
0430450813
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Empty Shell: NO; Additional Features: MICRO-FIT 3.0, POLARIZED;
0430450611
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; MIL Conformity: NO; Termination Type: SURFACE MOUNT;
0430450421
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; Mounting Type: BOARD; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
0430450419
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: MICRO-FIT 3.0, POLARIZED, SHROUDED; Mixed Contacts: NO; MIL Conformity: NO;
0430450426
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Insulator Material: POLYETHYLENE; Termination Type: SOLDER;
0430450625
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Filter Feature: NO; UL Flammability Code: 94V-0;
0430450417
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: MICRO-FIT 3.0, POLARIZED, SHROUDED; Insulator Material: POLYETHYLENE; Filter Feature: NO;
0430450424
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Termination Contact Finish: NOT APPLICABLE; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved