Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 03-09-2062 is a rectangular power connector with 6 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It has a body size of 0.54" x 0.73" x 1", operates b/w -40°C to 105°C, and uses solder termination for cable mounting applications.
Median Price
$0.236
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Avnet
1+ parts
$0.196
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.200
$0.186
Interstate Connecting
$0.203
$0.178
$0.161
Element14
$0.215
Heilind Electronics
$0.224
$0.188
$0.180
Distrelec
$0.381
$0.272
$0.240
$0.185
Arrow
$0.406
$0.273
$0.216
RS Americas
$0.434
$0.330
$0.265
DigiKey
$0.440
$0.288
$0.226
Farnell
$0.513
$0.328
$0.287
Mouser Electronics
$0.520
$0.347
$0.255
Newark
$0.525
$0.352
$0.259
TTI
$0.237
$0.193
TTI Europe
$0.206
$0.194
Master Electronics
$0.202
$0.187
Chip1Stop
$0.227
$0.201
RS (Exports)
$0.270
Beyond Components
PSC Electronics
NEP Electronics
Vyrian
Digiode
$0.204
TestEquity
Voyager Components
$0.250
Component Electronics Inc.
$0.380
$0.290
TME
$0.780
$0.479
$0.335
IBS Electronics
$0.208
SPM Sales
Electronic Treasures
Inventory MP
Bristol Electronics
QIE Inc.
Bisco
Resion
Elcom Components
ZD Integrated Circuits Inc.
NAC Semi
A2Z Electronics, Inc.
American Connector Supply Corp
GSS - Global Semi Support
Standard Data Resources
MISTER SPROCKETS
Corphita
Argo Parts USA
$0.220
Netroflash
$0.211
Continental Prestige Electronics
$0.395
$0.228
Perfect Parts
Lee Johnson Sales, Inc.
Close contact pitch allows for a higher contact density, making it suitable for applications where space is limited.
Compact body length helps in saving space and enables easy integration into various devices.
Optimal body width that provides a balanced size for the connector, ensuring compatibility with different setups.
High maximum operating temperature allows for reliable performance even in demanding environments.
Solder termination provides secure and reliable electrical connections, ensuring long-term durability.
Plug body style offers easy and efficient connection/disconnection of the power connector.
Power Connectors 03-09-2062 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
03-09-2062 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Obsolescence/ EOL - Multiple Devices 21/Jul/2016 3092062 Reversal 12/May/2017
PCN Design/Specification - V2 6/6 Nylon Resin Additional Supplier 05/Nov/2014
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
PCN Part Status Change - 3092062 Reversal 16/Jun/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Surge Components
American Power Devices
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rugao Dachang Electronic
Signetics
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
39-30-1120
Molex
Molex 39-30-1120 is a rectangular power connector with 12 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
10-84-5040
The Molex 10-84-5040 is a rectangular power connector with 4 contacts, tin finish, and 138u plating thickness. It has an insulation resistance of 1Gohm, withstands up to 500VAC, and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
DF22-2P-7.92DSA(53)
Hirose Electric
DF22-2P-7.92DSA(53) by Hirose Electric is a POWER CONNECTOR with 2 contacts, male SQ PIN-SKT style. It has dimensions of 0.678" x 0.49" x 0.713", operates b/w -55 to 85°C, and complies with UL 94V-0 flammability code. Ideal for board mounting applications.
43650-0424
The Molex 43650-0424 is a rectangular power connector with bright tin finish and glass-filled liquid crystal polymer insulator. Featuring brass contacts, it has 4 male contacts and UL 94V-0 flammability rating. Ideal for board mounting in various power applications.
03-09-2032
Molex 03-09-2032 is a rectangular power connector with 0.198" mating contact pitch, suitable for commercial applications. It has a dielectric voltage of 2000VAC, rated current of 14A, and operates b/w -55 to 105°C. The connector features a polarized housing, solder termination, and can accommodate wire sizes from 22 to 14 AWG.
172708-0004
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1-640507-0
TE Connectivity
TE Connectivity 1-640507-0 is a RECTANGULAR POWER CONNECTOR with 2 contacts, rated at 250V and 9A. Made of POLYAMIDE66, it has a body size of 1.06"x0.51"x0.29" and operates b/w -55°C to 85°C. Ideal for power applications requiring secure crimp termination in panels with wire sizes ranging from 26 AWG to 18 AWG.
647845-8
TE Connectivity 647845-8 is a RECTANGULAR POWER CONNECTOR with 2 contacts, rated at 600V and suitable for cables with wire sizes ranging from 12 to 6 AWG. Made of POLYCARBONATE, it has a body size of 1.9"x1.38"x0.625" and operates in temperatures from -20 to 105°C. Ideal for power applications requiring high voltage and temperature resistance.
IPD1-02-S-K-R
Samtec
Samtec's IPD1-02-S-K-R is a RECTANGULAR POWER CONNECTOR with 2 FEMALE contacts. Made of POLYAMIDE66, it uses CRIMP termination and is ideal for CABLE mounting applications.
39-29-9066
The Molex 39-29-9066 is a rectangular power connector with a mating contact pitch of 0.165 inches and a body length of 0.819 inches. It has an insulation resistance of 1000000000 ohm and is commonly used in power applications requiring a durable and reliable connection.
10-84-5090
The Molex 10-84-5090 is a rectangular power connector with 9 contacts, tin finish, and 3 rows. It has an insulation resistance of 1G ohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
39-31-0060
Molex 39-31-0060 is a rectangular power connector with 6 contacts, TIN COPPER finish, and POLYAMIDE66 insulator. It has a dielectric voltage of 2200VAC, operates b/w -40 to 105 °C, and offers high durability with 30 cycles. Ideal for board mounting applications requiring reliable male connectors with natural color insulation.
36783-1201
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: BRASS; Termination Contact Finish: MATTE TIN OVER NICKEL;
43045-0800
Molex 43045-0800 is a rectangular power connector with 8 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with bright tin finish and LCP insulator material.
2174661033
RECTANGULAR POWER CONNECTOR;
34566-0303
Molex 34566-0303 is a RECTANGULAR POWER CONNECTOR with 73 contacts, ideal for BOARD mounting. Made of GLASS FILLED SYNDIOTACTIC POLYSTYRENE, it features FEMALE contacts and SOLDER termination. Commonly used in applications requiring high contact density and secure power connections.
7461147
Wuerth Elektronik & Kg
The Wurth Elektronik & Kg 7461147 is a rectangular power connector with a body length and width of 0.35 inch, and a body depth of 0.27 inch. It has 16 contacts and is designed for board mounting. With a max operating temperature of 155°C and min operating temperature of -55°C, it is suitable for commercial applications requiring reliable power connections.
39-30-3035
The Molex 39-30-3035 is a rectangular power connector with 3 contacts, made of brass with matte tin finish. It has a body size of 0.94" x 0.213" x 0.49", suitable for board mounting in commercial applications. Operating temperature range from -40°C to 105°C makes it versatile for various electronic devices.
691701530002B
691701530002B by Wurth Elektronik is a Power Connector with 0.2" Mating Contact Pitch, 4000VAC Dielectric Withstanding Voltage, and TIN Termination Contact Finish. It features LIQUID CRYSTAL POLYMER Insulator Material and BRASS Contact Material. Ideal for commercial applications requiring a polarized housing with right angle mounting and locking option.
43045-0419
The Molex 43045-0419 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has an insulation resistance of 1Gohm, dielectric voltage rating of 1000VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
03-09-1027
Molex 03-09-1027 is a rectangular power connector with 0.54" x 0.25" x 1.03" dimensions, made of POLYAMIDE. It has UL 94V-2 flammability rating and features a receptacle body style for panel mounting. Ideal for commercial applications requiring reliable solder termination with locking mounting option.
03-09-1064
Molex 03-09-1064 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 6 FEMALE contacts, operates b/w -40 to 105 °C, and meets CSA and UL standards. Used in commercial applications for CABLE mounting with LOCKING MECH option.
03-09-1032
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Body or Shell Style: RECEPTACLE;
03-09-1049
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; No. of Connectors: ONE; No. of Rows Loaded: 2;
03-09-1094
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Mating Contact Pitch (inch): 0.198; Polarization Key: POLARIZED HOUSING;
03-09-2092
The Molex 03-09-2092 is a rectangular power connector with a mating contact pitch of 0.198 inches. It has a body length of 0.77 inch and width of 0.73 inch, making it suitable for cable mounting applications. With a max operating temperature of 105°C and UL flammability code of 94V-2, it offers reliable performance in commercial settings.
03-09-2022
Molex 03-09-2022 is a rectangular power connector with 0.64" body length and 0.35" width. Made of POLYAMIDE, it has UL 94V-2 flammability rating. Ideal for commercial applications, this plug-style connector features male and female contacts, solder termination, and locking mounting option.
03-09-1022
Molex 03-09-1022 is a rectangular power connector with 0.54" x 0.25" x 1.03" dimensions, made of POLYAMIDE material. Featuring UL 94V-2 flammability code, it has 2 contacts for solder termination and straight cable mounting. Ideal for commercial applications requiring reliable male or female connectors with locking option.
03-09-1041
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
03-09-1081
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Maximum Operating Temperature (Cel): 105;
03-09-1031
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Reference Standard: UL;
03-09-1121
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
03-09-1092
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Insulator Material: POLYAMIDE; Mating Contact Finish: NOT SPECIFIED;
03-09-2041
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
03-09-1091
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Additional Features: COMPATIBLE CONTACTS: 02-09-2134; 02-09-6132, POLARIZED; IEC Conformity: NO;
03-09-2011
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; Total No. of Contacts: 1; Empty Shell: YES;
03-09-1011
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Insulator Material: POLYAMIDE; Termination Type: SOLDER;
03-09-1042
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; No. of Connectors: ONE; Additional Features: COMPATIBLE CONTACTS: 02-09-2134; 02-09-6132, POLARIZED;
03-09-2049
Molex 03-09-2049 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It has a mating contact pitch of 0.198", suitable for commercial applications with operating temperatures ranging from -40 to 105°C. Ideal for panel mounting with solder termination and locking mechanism.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved