Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 03-09-1011 is a rectangular power connector with 0.198" mating contact pitch and 1.03" body depth. Made of POLYAMIDE, it operates b/w -40 to 105°C, suitable for cable mounting applications requiring reliable male or female solder terminations in commercial settings.
Median Price
$0.085
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.074
100+ parts
-
1k+ parts
10k+ parts
$0.062
Heilind Electronics
$0.079
$0.065
Newark
$0.082
$0.075
$0.069
Master Electronics
$0.077
Arrow
$0.099
$0.056
$0.052
Distrelec
$0.142
$0.098
$0.087
$0.076
Mouser Electronics
$0.150
$0.104
$0.089
$0.080
DigiKey
$0.180
$0.105
RS Americas
$0.181
$0.138
$0.111
Avnet
Chip1Stop
$0.071
RS (Exports)
$0.106
$0.100
NEP Electronics
TTI Europe
$0.092
$0.086
TTI
$0.067
Farnell
$0.084
$0.083
Verical
$0.066
Element14
$0.128
$0.120
Powell Electronics
PSC Electronics
Digiode
TestEquity
$0.070
Electro Sonic
$0.072
Nova Conductors
IBS Electronics
$0.109
Rapid Electronics
$0.207
Vyrian
TME
$0.116
Classic Components Corporation
VNN
American Connector Supply Corp
MISTER SPROCKETS
Semi Source
Resion
Bristol Electronics
$0.113
Microfarads
Electronic Expediters
Sogenti Electronics
Bisco
Corphita
$0.058
Argo Parts USA
$0.081
Bastille Electronics
Continental Prestige Electronics
$0.168
Perfect Parts
Kepictronics
GreenTree Electronics
Assy Fe
EMSNET (Excess)
ErreBi Group
Lee Johnson Sales, Inc.
SIE Connect GmbH (Excess)
The small mating contact pitch allows for a compact design, making this power connector suitable for applications with limited space constraints.
The slim body depth of the connector enables it to be used in devices or equipment where a low profile is required.
Polyamide is a durable and heat-resistant material, ensuring the connector can withstand high temperatures and harsh environments.
With a high maximum operating temperature, this connector is suitable for use in applications where heat dissipation is a concern.
The ability to operate in temperatures as low as -40°C makes this connector ideal for use in cold or outdoor environments.
The empty shell option allows for customization and flexibility in the type and number of contacts that can be installed, catering to different connectivity requirements.
The rectangular shape of the connector provides a secure and stable connection, minimizing the risk of accidental disconnection.
This UL flammability rating indicates that the connector meets safety standards for resistance to fire, ensuring a high level of protection in case of electrical faults.
The polarization key feature prevents incorrect insertion of contacts, reducing the risk of damage to the connector or connected devices.
Compliance with CSA and UL standards ensures that the connector meets quality and safety requirements, giving users confidence in its reliability.
The cable mounting option simplifies installation and maintenance, making this connector a convenient choice for various applications.
Solder termination provides a strong and reliable electrical connection, ensuring stable performance and minimal signal loss.
The availability of male and female contact options allows for versatile connectivity solutions, accommodating different equipment configurations.
The receptacle body style facilitates easy connection and disconnection of the connector, offering convenience in use.
The locking mechanism feature ensures secure attachment of the connector, preventing accidental disconnection and signal loss.
The rectangular contact pattern enables a stable and reliable connection, reducing the risk of signal interference or loss.
The commercial-grade reliability of this connector makes it a dependable choice for a wide range of commercial applications, ensuring long-term performance and durability.
Power Connectors 03-09-1011 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
03-09-1011 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
FT232RQ-REEL
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Taitron Components
105310-1204
Molex
Molex 105310-1204 Power Connector features Liquid Crystal Polymer insulator, rated for 7.5A signal current. With UL94V-0 flammability rating, it operates from -40 to 115°C. Ideal for board mounting applications with male SQ pin-skt contacts.
43650-0301
Molex 43650-0301 is a rectangular power connector with 3 contacts, 0.118" pitch, and 0.172" body width. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring reliable commercial-grade power connections.
03-06-1023
Molex 03-06-1023 is a rectangular power connector with POLYAMIDE insulator. It has 0.34" x 0.194" x 0.812" dimensions, operating from -40 to 105°C. With 2 contacts, it's ideal for cable mounting in commercial applications requiring reliable male/female crimp termination.
1-350944-0
TE Connectivity
TE Connectivity 1-350944-0 is a Power Connector with dimensions 1.05" x 0.36" x 0.36". It offers high insulation resistance of 100M ohm, matte tin termination finish, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings with a rated current of 19A.
91999-1249
The Molex 91999-1249 is a rectangular power connector with insulator material POLYAMIDE. It has 3 contacts, male gender, and blade pin-skt contact style. Suitable for board mounting with solder termination, it operates b/w -20 to 120°C and offers high insulation resistance of 10^7 ohm.
1723103102
The Molex 1723103102 is a power connector with dimensions of 0.405" x 0.352" x 0.614". It has a liquid crystal polymer insulator and can operate in temperatures ranging from -40°C to 105°C. This board-mounted connector features a male SQ PIN-SKT contact style and is commonly used in various applications requiring reliable power connections.
39-28-1083
Molex 39-28-1083 is a rectangular power connector with 8 contacts, TIN over copper finish, and polyamide66 insulator. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability meeting CSA, TUV, UL standards.
172167-1
TE Connectivity's 172167-1 Power Connector features a Mating Contact Pitch of 0.165", Insulation Resistance of 100MΩ, and Rated Voltage of 600V. Ideal for power applications, this connector has a durable design with POLYAMIDE66 insulator material and operates in temperatures ranging from -20°C to 105°C.
39-01-2165
Molex 39-01-2165 is a rectangular power connector with 16 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a body size of 1.37" x 0.46" x 0.77" and is used for cable mounting applications requiring high insulation resistance and UL94V-0 flammability rating.
39-29-9045
Molex 39-29-9045 is a rectangular power connector with 0.165" contact pitch, suitable for board mounting with 30u plating thickness. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL certification.
770020-1
TE Connectivity's 770020-1 is a POWER CONNECTOR with GLASS FILLED POLYAMIDE insulator. It has 6 contacts, operates b/w -55 to 120 °C, and meets CSA, UL, V standards. Ideal for CABLE mounting applications at 115/230VAC mains connector rating.
39-29-6128
Molex 39-29-6128 is a rectangular power connector with 12 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
6643269-1
TE Connectivity 6643269-1 is a rectangular power connector with silver termination finish. It has a rated current of 35A and operates b/w -40 to 105°C. Ideal for board mounting applications, featuring compliant boardlock option and press fit terminals.
3-794620-2
TE Connectivity 3-794620-2 is a power connector with 0.118" mating contact pitch, rated for 250V and 5A signal current. Ideal for board mounting applications, featuring POLYAMIDE insulation material and UL94V-0 flammability rating.
1300
Anderson Power Products
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; UL Flammability Code: 94V-0; DIN Conformance: NO; MIL Conformity: NO;
1-480318-0
TE Connectivity 1-480318-0 is a power connector with 0.53" body length, 0.295" width, and 0.86" depth. Insulation resistance of 500M ohm, operating temp range -55 to 105°C. Used in commercial applications for cable mounting with crimp termination.
42820-3213
Molex 42820-3213 is a rectangular power connector with 3 contacts, featuring insulation resistance of 1Gohm and dielectric voltage withstand of 2200VAC. Ideal for board mounting applications, it has a temperature range from -40 to +105°C and durable design for commercial reliability.
46999-0018
Power Connectors; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
39-30-0060
Molex 39-30-0060 is a rectangular power connector with 6 contacts, featuring insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications, it has a durable design with male contact gender and solder termination type.
1720430802
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN; Mating Contact Finish: NOT SPECIFIED; Contact Material: COPPER ALLOY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
03-09-1027
Molex 03-09-1027 is a rectangular power connector with 0.54" x 0.25" x 1.03" dimensions, made of POLYAMIDE. It has UL 94V-2 flammability rating and features a receptacle body style for panel mounting. Ideal for commercial applications requiring reliable solder termination with locking mounting option.
03-09-1064
Molex 03-09-1064 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 6 FEMALE contacts, operates b/w -40 to 105 °C, and meets CSA and UL standards. Used in commercial applications for CABLE mounting with LOCKING MECH option.
03-09-2032
Molex 03-09-2032 is a rectangular power connector with 0.198" mating contact pitch, suitable for commercial applications. It has a dielectric voltage of 2000VAC, rated current of 14A, and operates b/w -55 to 105°C. The connector features a polarized housing, solder termination, and can accommodate wire sizes from 22 to 14 AWG.
03-09-1032
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Body or Shell Style: RECEPTACLE;
03-09-1049
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE/MALE; No. of Connectors: ONE; No. of Rows Loaded: 2;
03-09-1094
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Mating Contact Pitch (inch): 0.198; Polarization Key: POLARIZED HOUSING;
03-09-2092
The Molex 03-09-2092 is a rectangular power connector with a mating contact pitch of 0.198 inches. It has a body length of 0.77 inch and width of 0.73 inch, making it suitable for cable mounting applications. With a max operating temperature of 105°C and UL flammability code of 94V-2, it offers reliable performance in commercial settings.
03-09-2022
Molex 03-09-2022 is a rectangular power connector with 0.64" body length and 0.35" width. Made of POLYAMIDE, it has UL 94V-2 flammability rating. Ideal for commercial applications, this plug-style connector features male and female contacts, solder termination, and locking mounting option.
03-09-1022
Molex 03-09-1022 is a rectangular power connector with 0.54" x 0.25" x 1.03" dimensions, made of POLYAMIDE material. Featuring UL 94V-2 flammability code, it has 2 contacts for solder termination and straight cable mounting. Ideal for commercial applications requiring reliable male or female connectors with locking option.
03-09-1041
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
03-09-1081
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Maximum Operating Temperature (Cel): 105;
03-09-1031
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; Reference Standard: UL;
03-09-1121
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
03-09-1092
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Insulator Material: POLYAMIDE; Mating Contact Finish: NOT SPECIFIED;
03-09-2041
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
03-09-1091
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Additional Features: COMPATIBLE CONTACTS: 02-09-2134; 02-09-6132, POLARIZED; IEC Conformity: NO;
03-09-2011
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE AND FEMALE; Total No. of Contacts: 1; Empty Shell: YES;
03-09-2062
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Type: CABLE; IEC Conformity: NO;
03-09-1042
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; No. of Connectors: ONE; Additional Features: COMPATIBLE CONTACTS: 02-09-2134; 02-09-6132, POLARIZED;
03-09-1014
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Body or Shell Style: RECEPTACLE; Mating Contact Finish: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved