Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Mini-circuits TC1-1-43X+ RF Transformer features 2 dB insertion loss, 650 GHz min cutoff frequency, and 4000 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with dimensions of L3.81xB3.81xH4.06 mm.
Median Price
$17.120
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.644
1k+ parts
$1.591
10k+ parts
$1.356
Nova Conductors
$1.339
-
Vyrian
Semtec, LLC
Greenchips
SIE Connect GmbH - GreenChips
Netsource Technology, Inc.
Cogito LLC
Continental Prestige Electronics
$1.312
Argo Parts USA
Bastille Electronics
$1.272
$1.208
$1.192
Aztec Data Supply Inc.
$5.290
Corohmni
$6.070
Perfect Parts
Low insertion loss ensures efficient signal transfer with minimal loss of power, making this RF transformer suitable for high-performance applications.
Compact size allows for easy integration into various electronic devices without taking up much space.
High maximum operating temperature ensures reliable performance even in demanding environments.
Low cutoff frequency allows for effective signal filtering and processing at high frequencies.
Wide range of operating temperatures enables the transformer to function in extreme conditions.
Tin over nickel terminal finish provides excellent conductivity and corrosion resistance for long-term durability.
Optimal height for fitting into compact spaces while maintaining signal integrity.
Narrow width makes it ideal for applications where space is limited.
High maximum cutoff frequency allows for processing signals up to 4000 MHz, suitable for a wide range of RF applications.
Specifically designed for RF applications, ensuring optimal performance in radio frequency circuits.
Surface mount design allows for easy and secure installation on circuit boards, saving time and effort.
Compact length facilitates easy integration into electronic circuits while maintaining signal integrity.
RF Transformers TC1-1-43X+ attributes and parameters. Explore more RF Transformers devices from Mini-circuits
Additional Features:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
JESD-609 Code:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Terminal Finish:
Transformer Type:
Width:
TC1-1-43X+ Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. With design, manufacturing and sales locations in over 30 countries, Mini-Circuits offers 27 product lines comprising over 10,000 active models. Mini-Circuits products are used widely in commercial, industrial, and military applications including: cellular wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID, test instrumentation, diagnostic imaging and many more. Over the last 50 years, demanding quality standards, innovative design capabilities, world-class customer service and long-term stability have made Mini-Circuits the preferred supplier to over 20,000 customers worldwide.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
P3181
Etal Group Ab
P3181 RF Transformer by Etal Group Ab features inductance of 10800 uH, dimensions L13.0XB9.0XH7.0 (mm), and a turns ratio of 1.1:1. It is ideal for applications requiring surface mounting, with approvals including IEC60950 and UL standards, suitable for use in various electronic devices.
Z9314-ALB
Coilcraft
Coilcraft's Z9314-ALB RF Transformer offers 1.1 dB insertion loss, 4.5 uH primary inductance, and operates b/w -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 0.35 GHz up to a max of 1700 MHz, this surface mount transformer is designed for high-frequency RF circuits.
MABAES0061
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 2.7 mm; Dimensions: L3.81XB2.79XH3.8 (mm); Maximum Operating Temperature: 85 Cel; Length: 3.81 mm;
ATB3225-75034CT
TDK
The TDK ATB3225-75034CT RF Transformer has 2dB insertion loss, operates b/w -25°C to 85°C, with a cutoff frequency range of 1GHz to 100MHz. Ideal for surface mount applications in RF circuits due to its compact size and high-frequency capabilities.
TC1-1-43+
Mini-circuits
The Mini-circuits TC1-1-43+ RF Transformer offers 2 dB insertion loss and can handle up to 30 mA DC unbalance current. With dimensions of L3.81xB3.81xH4.06 mm, it is suitable for signal applications with a frequency range from 650 KHz to 4000 MHz at temperatures ranging from -40 to 85 °C.
HFB050100
Pulse Specialty Components
RF TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: HFB050100; Packing Method: BULK; Height: 22.86 mm; Minimum Operating Temperature: 0 Cel;
TTWB1010-1LD
Coilcraft's TTWB1010-1LD RF Transformer offers 400V isolation voltage, 0.2dB insertion loss, and 95uH primary inductance. Ideal for power applications, it operates b/w -40 to 85°C with a frequency range of 30kHz to 250MHz. This surface mount transformer measures L6.35xB6.1xH4.7mm and features tin/silver/copper terminal finish.
PWB2010LB
Coilcraft's PWB2010LB RF Transformer offers low insertion loss of 0.2 dB, inductance of 780 uH, and a max cutoff frequency of 125 MHz. Ideal for surface mount applications in RF circuits operating b/w -40 to 85°C with dimensions L6.48xB7.2xH4.45 mm.
BALF-NRF01E3
STMicroelectronics
BALF-NRF01E3 by STMicroelectronics is a compact RF transformer ideal for wireless applications. It features an insertion loss of 2.7 dB, operates b/w 2400 MHz and 2540 MHz, and withstands temperatures from -40 °C to 105 °C. Its surface mount design ensures easy integration into devices.
HHM1523C1
The TDK HHM1523C1 RF Transformer features low insertion loss of 1.1 dB, with dimensions L2.0xB1.25xH0.95 (mm). Ideal for applications requiring a min cutoff frequency of 880 GHz and max operating temperature of 85°C, this surface mount transformer operates in the frequency range up to 960 MHz.
WBC4-1TLC
Coilcraft's WBC4-1TLC RF Transformer features 1 dB insertion loss, 9 uH primary inductance, and operates b/w -40 to 85 °C. Ideal for applications requiring a min cutoff frequency of 0.25 GHz up to a max of 750 MHz.
WB2010-SMLD
WB2010-SMLD by Coilcraft is a RF transformer with an inductance of 780 uH. It has dimensions of L8.26XB7.24XH5.72 (mm) and can operate at temperatures ranging from -40 to 85 °C. This surface mount transformer is commonly used in RF applications with a cutoff frequency range of 0.005 GHz to 100 MHz.
ETC1-1T-5TR
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Dimensions: L3.81XB2.79XH3.81 (mm); Insertion Loss: 2 dB; Length: 3.81 mm;
0900BL15C050E
Johanson Technology
Johanson Technology's 0900BL15C050E RF Transformer offers low insertion loss of 1.2 dB, operating temperature range from -40 to 85°C, and cutoff frequency ranging from 800 MHz to 1000 GHz. Ideal for surface mount applications in RF circuits for efficient signal transformation.
TTWB1010LD
The Coilcraft TTWB1010LD RF Transformer offers 400V isolation voltage, 0.2dB insertion loss, and 780uH inductance. Ideal for power applications with a max operating temperature of 85°C, it features tin/silver/copper terminal finish and surface mounting feature.
TTWB2040
Coilcraft's TTWB2040 RF Transformer offers low 0.4 dB insertion loss, 25 uH primary inductance, and 1:4 turns ratio. Ideal for surface mount applications in RF circuits with a frequency range from 0.15 GHz to 400 MHz.
BD2425NNRF
Ttm Technologies
BD2425NNRF by Ttm Technologies is a RF Transformer with 1.25 dB Insertion Loss, 2400 GHz Min Cutoff Frequency, and 2525 MHz Max Cutoff Frequency. Ideal for surface mount applications in RF circuits due to its compact dimensions of 1.05mm x 1.05mm x 0.57mm and NICKEL GOLD terminal finish.
HHM1520A2
The TDK HHM1520A2 RF Transformer has 1 dB insertion loss, operates b/w -40 to 85°C, and supports frequencies from 2300 MHz to 2500 MHz. Ideal for surface mount applications in RF circuits due to its compact dimensions of L2xB1.25xH0.95 mm on reel packaging.
Tyco Electronics M/a-com
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1T-5; Minimum Operating Temperature: -40 Cel; Width: 2.79 mm; Packing Method: TAPE & REEL;
ETC1-1-13TR
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1-13; Minimum Operating Temperature: -40 Cel; Maximum Cutoff Frequency: 3000 MHz; Width: 2.79 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TC1-1-13MX+
Mini-circuits TC1-1-13MX+ RF Transformer has 3 dB insertion loss, operates from -40 to 85°C, with cutoff frequencies ranging from 4.5 GHz to 3000 MHz. Ideal for surface mount applications in RF circuits due to its compact dimensions of L3.81xB3.81xH4.06 mm.
TC1-1-13MA+
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Impedance (Primary): 50 OHMS; Application: SIGNAL; No. of Winding (Secondary): 1;
TC1-1-13MG2
Mini-circuits TC1-1-13MG2 RF Transformer has 50Ω impedance, 3.02 dB insertion loss, and operates from -40 to 85°C. Ideal for signal applications with a frequency range of 4.5 kHz to 3 GHz, this surface-mount transformer is compact at 3.81mm x 3.81mm x 3.81mm in size.
TC1-1-13MG2+
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: GOLD OVER NICKEL; Impedance (Primary): 50 OHMS; Maximum DC Unbalance Current: 30 mA; Dimensions: L3.81XB3.81XH3.81 (mm);
TC1-1-13M
Mini-circuits TC1-1-13M RF Transformer features 3dB Insertion Loss, 4.5GHz Min Cutoff Freq, and 3000MHz Max Cutoff Freq. Ideal for surface mount applications in RF circuits with dimensions of L3.81xB3.81xH3.81 mm and operating temperatures from -40 to 85°C.
TC1-1-13M+
Mini-circuits TC1-1-13M+ RF Transformer has 0.25W power rating, 3dB insertion loss, and max DC unbalance current of 30mA. Ideal for signal applications with a min cutoff frequency of 4.5GHz and operating temp range from -40 to 85°C.
TC1-1-13M-75X+
Mini-circuits TC1-1-13M-75X+ RF Transformer features 3dB insertion loss, 4.5 GHz min cutoff freq, and 3000 MHz max cutoff freq. Ideal for surface mount applications in RF circuits with temp range -40 to 85°C.
TC1-1-13M-75+
Mini-circuits TC1-1-13M-75+ RF Transformer has 3 dB insertion loss, operates from -40 to 85°C, with cutoff frequencies of 4.5 GHz to 3 GHz. Ideal for surface mount applications in RF circuits.
TC1-1-13M-22+
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 3.81 mm; Maximum Cutoff Frequency: 3000 MHz; Minimum Cutoff Frequency: 4.5 GHz; Dimensions: L3.81XB3.81XH4.06 (mm);
TC1-1-13M-34+
Mini-circuits TC1-1-13M-34+ RF Transformer features 1.5 dB Insertion Loss, 47 GHz Min Cutoff Freq, and 1400 MHz Max Cutoff Freq. Ideal for RF applications requiring Surface mounting with TR packing method in a compact design suitable for temperatures ranging from -40 to 85°C.
TC1-1-13M-23+
Mini-circuits TC1-1-13M-23+ RF Transformer features 3dB insertion loss, 4.5GHz min cutoff freq, and 3000MHz max cutoff freq. Ideal for surface mount applications in RF circuits with dimensions L3.81xB3.81xH4.06mm and temp range -40 to 85°C.
TC1-1TG2+
Mini-circuits TC1-1TG2+ RF Transformer has 0.25W power rating, 3dB insertion loss, and operates from -40 to 85°C. Ideal for signal applications with a frequency range of 400KHz to 500MHz. Dimensions are L3.81xB3.81xH3.81mm, featuring gold over nickel terminal finish and surface mounting feature.
TC1-1TX+
Mini-circuits TC1-1TX+ RF Transformer has a power rating of 0.25W with 3dB insertion loss. Ideal for signal applications, it operates b/w -40 to 85°C, covering frequencies from 400KHz to 500MHz. Compact at L3.81xB3.81xH4.06mm, it's surface mountable for easy integration in various systems.
TC1-1T-75X+
Mini-circuits TC1-1T-75X+ RF Transformer features 0.6 dB insertion loss, 5 GHz min cutoff freq, and 120 MHz max cutoff freq. Ideal for RF applications with surface mounting feature.
TC1-1T+
TC1-1T+ by Mini-circuits is a RF transformer with 0.25W power rating, 3dB insertion loss, and 1.5GHz min cutoff frequency. Ideal for signal applications, it operates b/w -40 to 85°C temperatures and has dimensions of L3.81xB3.81xH4.06 mm for surface mounting method.
TC1-1T
The Mini-circuits TC1-1T RF Transformer has a power rating of 0.25W, insertion loss of 3dB, and max cutoff frequency of 500MHz. Ideal for power applications, it operates b/w -40 to 85°C temperatures and features a 1:1 turns ratio. This surface mount transformer is suitable for frequencies ranging from 400KHz to 500MHz.
TC1-1T-152X+
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Cutoff Frequency: 5 GHz; Length: 3.81 mm; Minimum Operating Temperature: -40 Cel; Insertion Loss: 2.5 dB;
TC1-1-43A+
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN OVER NICKEL; JESD-609 Code: e3; Dimensions: L3.81XB3.81XH4.06 (mm); Insertion Loss: 2 dB;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN OVER NICKEL; Packing Method: TR, 13 INCH; Minimum Operating Frequency: 650000 KHz; Maximum DC Unbalance Current: 30 mA;
TC1-1-43X-2+
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Minimum Cutoff Frequency: 650 GHz; Length: 3.81 mm; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved