Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Mini-circuits HFCN-650+ is a Ceramic HPF filter with 40 dB attenuation at 260 kHz and 20 dB at 170 kHz. With a center frequency of 650 MHz, it has a VSWR of 1.5 and can handle up to 7W input power. Ideal for surface mount applications in RF systems requiring precise filtering capabilities.
Median Price
$12.535
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
$12.230
100+ parts
$2.652
1k+ parts
$1.867
10k+ parts
$1.525
Mouser Electronics
$12.840
$2.360
$1.680
-
Nova Conductors
$1.513
Vyrian
Bristol Electronics
Cyclops Electronics Ltd
Prism Electronics
Cogito LLC
Lantek
Netroflash
Authorized Procurement Solutions
Kepictronics
Ceramic filters have high stability and reliability, making them ideal for applications that require precise signal filtering.
High attenuation at maximum frequency ensures unwanted signals or noise are effectively filtered out, resulting in clean output signals.
With a high maximum operating temperature, this ceramic filter can withstand harsh environmental conditions, ensuring long-term reliability.
The wide range of operating temperatures allows this filter to be used in various environments without compromising performance.
Effective filtering at low frequencies ensures that the desired signals are retained while unwanted signals are attenuated, leading to a clean output.
Tin with nickel barrier terminal finish provides excellent conductivity and corrosion resistance, ensuring a reliable electrical connection.
Compact width makes it suitable for applications where space is a constraint, enabling easy integration into electronic circuit designs.
Low insertion loss ensures minimal signal loss as it passes through the filter, maintaining signal integrity and overall system performance.
The chosen cutoff frequency makes this filter suitable for applications requiring signal filtering in the 650 MHz frequency range.
A low VSWR value indicates minimal reflected power and efficient power transfer, making this filter an effective choice for signal filtering.
Compact length allows for easy installation and integration into electronic circuits, making it an efficient solution for signal filtering applications.
Having a minimum of 7 sections provides effective filtering capabilities, ensuring precise signal separation and noise reduction.
The maximum number of 7 sections allows for optimal signal processing and filtering, ensuring reliable performance in signal transmission.
With an average input power of 7 W, this ceramic filter can handle moderate power levels, making it suitable for various applications.
Surface mount design enables easy and secure installation on PCBs, offering a space-saving solution and efficient assembly process.
Standard 50 ohm impedance ensures compatibility with common RF components, making it a versatile choice for RF signal filtering applications.
Compact dimensions allow for easy integration into electronic circuits while providing precise signal filtering and noise reduction capabilities.
High attenuation frequency ensures effective filtering of unwanted signals at higher frequencies, maintaining signal clarity and integrity.
Even at the minimum frequency, the filter provides significant attenuation of unwanted signals, ensuring reliable performance across the frequency spectrum.
Low height profile makes it suitable for applications with height restrictions, allowing for flexible and efficient integration into electronic designs.
Ceramic Filters HFCN-650+ attributes and parameters. Explore more Ceramic Filters devices from Mini-circuits
Additional Features:
Maximum Attenuation Frequency (± Δf):
Minimum Attenuation Frequency (± Δf):
Attenuation At Maximum Frequency:
Attenuation At Minimum Frequency:
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Terminal Finish:
Voltage Standing Wave Ratio:
Width (mm):
HFCN-650+ Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Product Change Notification_2024_03_08 (PDF)
Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. With design, manufacturing and sales locations in over 30 countries, Mini-Circuits offers 27 product lines comprising over 10,000 active models. Mini-Circuits products are used widely in commercial, industrial, and military applications including: cellular wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID, test instrumentation, diagnostic imaging and many more. Over the last 50 years, demanding quality standards, innovative design capabilities, world-class customer service and long-term stability have made Mini-Circuits the preferred supplier to over 20,000 customers worldwide.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2450FM07A0029T
Johanson Technology
Johanson Technology's 2450FM07A0029T is a Ceramic LPF filter with 2450 MHz center frequency, 0.8 dB insertion loss, and 2 W power rating. Ideal for surface mount applications in the -40 to 85 °C temperature range, this filter has a compact size of 1mm x 0.5mm x 0.4mm.
LFCW-5500+
Mini-circuits
LFCW-5500+ by Mini-circuits is a ceramic LPF filter with a center frequency of 6320 MHz and max insertion loss of 2 dB. It operates in temperatures ranging from -55 to 100 °C and has a compact size of 1.6 mm length, 0.8 mm width, and 0.6 mm height. This filter is ideal for applications requiring high-frequency signal filtering in surface mount configurations.
FI168L1681DT-T
Taiyo Yuden
FI168L1681DT-T by Taiyo Yuden is a Ceramic LPF filter with 0.8mm width, 1.6mm length, and 0.65mm height. It operates b/w -40 to 85 °C with a max insertion loss of 0.2 dB at 1653.5 MHz, making it ideal for surface mount applications in the 50 OHM impedance range.
HFCN-880D+
The Mini-circuits HFCN-880D+ is a Ceramic HPF filter with 40 dB attenuation at 380 MHz. With a VSWR of 1.5, it operates b/w -55°C to 100°C and has a max insertion loss of 3 dB. Ideal for RF applications requiring high-frequency filtering in compact spaces.
LFCN-1575D+
LFCN-1575D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 500 kHz. With a center frequency of 1825 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
LFCG-92+
LFCG-92+ by Mini-circuits is a Ceramic LPF filter with a center frequency of 495 MHz and 50 OHM impedance. It features Tin (Sn) finish with Nickel (Ni) barrier, suitable for surface mount applications. Its compact dimensions make it ideal for RF signal filtering in small electronic devices.
CDB455C16
Murata Manufacturing
Murata Manufacturing's CDB455C16 is a Ceramic BPF filter with 0.455 MHz center frequency, -20 to 80°C operating range, and dimensions of L7xB3.5xH9 mm. Ideal for through-hole mounting applications in various electronic devices requiring precise signal filtering capabilities.
LFB212G49SG8B830
Murata Manufacturing's LFB212G49SG8B830 is a Ceramic BPF filter with 2.6 dB max insertion loss, 2495 MHz center frequency, and 50 OHM impedance. Ideal for surface mount applications in electronics requiring precise filtering at temperatures ranging from -40 to 85 °C.
LFCN-320+
LFCN-320+ by Mini-circuits is a Ceramic LPF filter with 1dB insertion loss at 460MHz. With 7 sections, it offers a VSWR of 1.2 and can handle up to 8.5W input power. Ideal for surface mount applications requiring a compact filter with 50Ω impedance.
DFC3R836P025BHD
Murata Manufacturing's DFC3R836P025BHD is a Ceramic BPF filter with 2.6 dB max insertion loss at 836.5 MHz. Operating b/w -30°C to 85°C, it features gold terminal finish and surface mounting type. Ideal for applications requiring precise frequency filtering in compact spaces.
HFCW-5500+
The Mini-circuits HFCW-5500+ is a Ceramic HPF filter with a center frequency of 16750 MHz, handling up to 2.5 W power. Operating from -55°C to 125°C, it's ideal for RF applications requiring a surface mount ceramic filter with 50 Ohm impedance.
CFUCG455KF4X-R0
Murata Manufacturing's CFUCG455KF4X-R0 is a Ceramic BPF filter with 6 dB max insertion loss and 0.455 MHz center frequency. Operating b/w -20°C to 80°C, it has a compact size of L6xB4xH7.5 mm for surface mount applications with 1500 Ohm impedance.
CFM455C
Murata Manufacturing's CFM455C is a Ceramic BPF filter with 60 dB attenuation at max 0.455 MHz frequency, and 6 dB at min 13 kHz. With dimensions of L20xB7.5xH10.5 mm, it's ideal for through-hole mounting in applications requiring precise frequency filtering like communication devices.
LFCN-1800D+
LFCN-1800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, attaining 40 dB attenuation at max frequency of 875 kHz. With a center frequency of 2125 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces.
5515BP15B725
Johanson Technology's 5515BP15B725 is a Ceramic BPF filter with fo/fc at 5512.5 MHz and max insertion loss of 1.5 dB. Operating temp ranges from -40 to 85 °C, making it ideal for surface mount applications in RF circuits. Dimensions: L2.0xB1.25xH0.85 mm (L0.079xB0.049xH0.033 inch).
SFECS13M0SF0023-R0
Murata Manufacturing's SFECS13M0SF0023-R0 is a Ceramic BPF filter with 5 dB attenuation at 13 MHz. It has a max insertion loss of 6 dB and operates at an I/O impedance of 330Ω. Ideal for surface mount applications, it provides 250 kHz attenuation frequency for effective signal filtering.
CFWLA455KHFA-B0
Golledge Electronics
CERAMIC BPF; Length: 11.5 mm; Dimensions: L11.5XB7.5XH8 (mm); Additional Features: BULK; HIGH SELECTIVITY; Width (mm): 7.5; Maximum Insertion Loss: 6 dB;
B096QC2S
Knowles Precision Devices
B096QC2S by Knowles Precision Devices is a Ceramic BPF filter with 3dB max insertion loss, 10,000 MHz center frequency, and -55 to 125°C operating temperature range. Ideal for surface mount applications in need of a compact (4.57mm x 10.86mm x 2.54mm) ceramic filter with 50Ω impedance.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
LFCN-800
LFCN-800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HFCN-880+
CERAMIC HPF; Minimum No. of Sections: 7; Mounting Type: SURFACE MOUNT; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Minimum Attenuation Frequency (± Δf): 240000 kHz; Average Input Power: 7 W;
HFCN-880
CERAMIC HPF; JESD-609 Code: e0; No. of Terminals: 4; Additional Features: TAPE AND REEL; Width (mm): 1.6; Maximum No. of Sections: 7;
HFCN-880D
CERAMIC HPF; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Attenuation Frequency (± Δf): 380000 kHz; Width (mm): 1.6; Voltage Standing Wave Ratio: 1.5; Mounting Type: SURFACE MOUNT;
CERAMIC HPF; Center/Cutoff Frequency (fo/fc): 880 MHz; Voltage Standing Wave Ratio: 1.5; No. of Terminals: 4; Height: .94 mm; Maximum Operating Temperature: 100 Cel;
HFCN-2700+
CERAMIC HPF; Maximum Operating Temperature: 100 Cel; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Additional Features: TAPE AND REEL; Width (mm): 1.6; Length: 3.2 mm;
HFCN-2700
The Mini-circuits HFCN-2700 is a Ceramic HPF filter with 4 terminals, attaining 40 dB attenuation at 1 MHz. With a center frequency of 2500 MHz and VSWR of 1.5, it's ideal for RF applications requiring high-frequency filtering in a compact surface-mount design.
HFCN-2700AD+
CERAMIC HPF; I/O Impedance: 50 OHM; Maximum Insertion Loss: 3 dB; JESD-609 Code: e3; Average Input Power: 7 W; Screening Level: MIL-STD-202;
HFCN-5500D
CERAMIC HPF; Maximum Operating Temperature: 100 Cel; Width (mm): 1.6; Average Input Power: 7 W; Center/Cutoff Frequency (fo/fc): 5500 MHz; Maximum Attenuation Frequency (± Δf): 1000000 kHz;
HFCN-5500D+
HFCN-5500D+ by Mini-circuits is a ceramic filter with a cutoff frequency of 5500 MHz and attenuation of 30 dB at max frequency. It operates in temperatures ranging from -55 to 100 °C and is suitable for surface mount applications requiring high pass filtering.
HFCN-650
The Mini-circuits HFCN-650 is a ceramic BPF filter with 4 terminals, offering attenuation up to 40 dB at 260 MHz. With a center frequency of 650 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter ensures reliable performance in various environments.
HFCN-650D
CERAMIC HPF; Additional Features: TAPE AND REEL; Minimum Operating Temperature: -55 Cel; No. of Terminals: 4; Attenuation At Maximum Frequency: 40 dB; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch);
HFCN-650D+
CERAMIC HPF; Minimum Attenuation Frequency (± Δf): 170000 kHz; No. of Terminals: 4; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Width (mm): 1.6; I/O Impedance: 50 OHM;
HFCN-2275
CERAMIC HPF; Height: .94 mm; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Terminal Finish: TIN LEAD; Minimum No. of Sections: 7; Attenuation At Maximum Frequency: 40 dB;
HFCN-1320
CERAMIC HPF; Average Input Power: 7 W; Height: .94 mm; Maximum Insertion Loss: 3 dB; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -55 Cel;
HFCN-1600
CERAMIC HPF; Length: 3.2 mm; Maximum Insertion Loss: 3 dB; Terminal Finish: Tin/Lead (Sn/Pb); Height: .94 mm; Maximum No. of Sections: 7;
HFCN-1200+
CERAMIC HPF; I/O Impedance: 50 OHM; Average Input Power: 7 W; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Length: 3.2 mm; Maximum Operating Temperature: 100 Cel;
HFCN-1300+
CERAMIC HPF; Maximum Insertion Loss: 3 dB; Length: 3.2 mm; JESD-609 Code: e3; Average Input Power: 7 W; Minimum No. of Sections: 7;
HFCN-1600D+
CERAMIC HPF; Screening Level: MIL-STD-202; Terminal Finish: TIN OVER NICKEL; Width (mm): 1.6; Height: .94 mm; Voltage Standing Wave Ratio: 1.5;
HFCN-8400+
CERAMIC HPF; Maximum Operating Temperature: 100 Cel; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; I/O Impedance: 50 OHM; Minimum Operating Temperature: -55 Cel; Maximum No. of Sections: 5;
HFCN-440+
CERAMIC HPF; Center/Cutoff Frequency (fo/fc): 440 MHz; Minimum Attenuation Frequency (± Δf): 90000 kHz; I/O Impedance: 50 OHM; Minimum Operating Temperature: -55 Cel; No. of Terminals: 4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved