Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Mill-max Mfg 803-93-100-20-001000 is a 2-row board connector with 100 contacts. Features tin/lead termination, gold mating finish, and right-angle mounting. Ideal for applications requiring female socket connectors on PCBs.
Median Price
$23.052
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$31.610
Vyrian
VNN
EPE Components Inc.
Bristol Electronics
AZTECH Wire
$6.400
Netroflash
Ampacity Inc.
$33.490
Perfect Parts
The Tin/Lead finish with Nickel barrier ensures good conductivity and durability, making this product a reliable choice for connections.
Having 2 rows loaded allows for more connections to be made in a compact space, increasing the versatility and capacity of the product.
The board connector type is commonly used and provides a secure and stable connection between the board and other components, ensuring reliable performance.
The Gold over Nickel finish on mating contacts provides excellent conductivity and corrosion resistance, enhancing the longevity and quality of connections.
With a large number of contacts, this product is suitable for applications requiring multiple connections, offering flexibility and scalability.
The board mounting type simplifies installation and maintenance, making it easy to integrate this product onto circuit boards.
The 2.54mm terminal pitch allows for precise spacing between connections, ensuring proper alignment and reducing the risk of errors or malfunctions.
The solder termination type provides a strong and durable connection, securing the contacts in place and minimizing the risk of disconnections or signal loss.
Having female contacts allows for compatibility with various male connectors, enabling versatile and universal connections in different systems.
The socket body style offers a secure and stable connection, ensuring proper alignment and reducing the risk of damage or misalignment during use.
The right angle mounting style allows for compact and space-saving installations, making this product ideal for applications with limited space or specific layout requirements.
Headers & Edge Type Connectors 803-93-100-20-001000 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Mill-max Mfg
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
803-93-100-20-001000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Mill-Max Mfg. Corp. is a vertically integrated engineering and manufacturing company capable of producing over 100 million interconnect components a week, making us the largest manufacturer of precision machined interconnect components in North America.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Intersil
2N7002
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SS14
Eic Semiconductor
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
51021-0700
The Molex 51021-0700 is a board connector with 7 contacts, 0.049" pitch, and 0.413" body length. It has an insulation resistance of 100M ohm and operates b/w -40°C to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
53048-0610
Molex 53048-0610 is a board connector with 6 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. Ideal for commercial applications, it has a right-angle mounting style and solder termination, operating b/w -40°C to 85°C.
S2B-PH-SM4-TB
J S T Mfg
S2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 2 contacts, COPPER ALLOY material, and TIN finish. It has a terminal pitch of 2mm for SURFACE MOUNT applications in headers & edge type connectors. The connector is UL 94V-0 rated and suitable for RIGHT ANGLE mounting on boards.
22-27-2031
The Molex 22-27-2031 is a BOARD CONNECTOR with 3 contacts, POLYAMIDE insulator, and BRASS contact material. It has a mating pitch of 0.1", operates b/w 0-75°C, and features a tin finish. Ideal for commercial applications requiring a durable connector with white insulator color and UL94V-0 flammability rating.
52271-0469
Molex 52271-0469 FFC/FPC connector with 0.039" pitch, 0.118" body width, and TIN finish is ideal for board mounting applications. Features include polyamide insulator, phosphor bronze contacts, and UL94V-0 flammability rating. Suitable for surface mount termination in commercial settings.
823-22-012-10-000101
Mill-max Mfg
823-22-012-10-000101 by Mill-max Mfg is a 12-contact board stacking connector with gold over nickel finish. Featuring 2 rows, 2.54mm terminal pitch, and UL94V-0 flammability rating, it's ideal for board applications requiring reliable male contacts in straight mounting style.
TSW-104-07-T-S
Samtec
Samtec TSW-104-07-T-S is a 4-contact board connector with 0.1" pitch, suitable for commercial applications. It features phosphor bronze contacts with matte tin finish and operates b/w -55°C to 105°C. The connector has a black insulator made of polybutylene terephthalate, UL94V-0 rated, and uses solder termination.
DT04-3P-E003
TE Connectivity's DT04-3P-E003 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. With a UL flammability code of 94V-0, it is ideal for applications requiring a polarized male connector with strain relief mounting.
XHP-10
XHP-10 by J S T Mfg is a 10-contact board connector with female crimp termination. It has UL 94V-0 flammability rating and is used in cable mounting applications. This receptacle connector is ideal for various electronic devices requiring secure and reliable connections.
ESHF-105-01-L-D-SM-LC
ESHF-105-01-L-D-SM-LC by Samtec is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05", matte tin termination finish, and liquid crystal polymer insulator. It has a temperature range of -55 to 125°C and is ideal for commercial applications requiring a polarized housing and surface mount termination on rectangular PCB patterns.
801-43-020-10-012000
Mill-max Mfg's 801-43-020-10-012000 is a 20-contact board connector with matte tin over nickel finish. Featuring a terminal pitch of 2.54mm, it is ideal for applications requiring a female socket connector with UL94V-0 flammability rating. Suitable for straight mounting on boards, this connector offers reliable solder termination.
2-640456-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Termination Type: SOLDER; Mating Contact Finish: TIN;
DT06-3S-P006
TE Connectivity's DT06-3S-P006 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and measures 1.228" x 0.737" x 0.94".
S3B-XH-A(LF)(SN)
S3B-XH-A(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin copper finish. It has a terminal pitch of 2.5mm, UL 94V-0 flammability rating, and right-angle mounting style. Ideal for applications requiring secure board-to-board connections in electronic devices.
76384-303LF
Amphenol Communications Solutions
Amphenol 76384-303LF is a board connector with 0.1" pitch, suitable for commercial applications. Features include 3A signal current, -40 to 125°C operating range, and UL94V-0 flammability rating. Ideal for PCB mounting with solder termination and polarized housing design.
B2B-ZR-SM4-TF(LF)(SN)
B2B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
66506-358LF
Amphenol's 66506-358LF is a 20-contact, 2-row board connector with UL 94V-0 flammability rating. Featuring a terminal pitch of 2.54mm, it is solder terminated and male gendered. Ideal for applications requiring straight mounting style in headers & edge type connectors.
1761606-3
TE Connectivity's 1761606-3 is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features a body length of 0.8", insulation resistance of 5G ohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
50-57-9010
The Molex 50-57-9010 is a board connector with 10 contacts, 0.1" pitch, and 0.099" body width. It features glass-filled polyester insulator material and is UL94V-0 rated. Ideal for commercial applications requiring a reliable female SQ pin-skt contact style with crimp termination on cable mounting.
1-2199230-6
TE Connectivity 1-2199230-6 is a 2-row card edge connector with 0.5" pitch, ideal for board mounting with POLYETHYLENE insulator. Rated at 0.5A, it has 67 contacts and operates b/w -40 to 80°C. Suitable for applications requiring right angle surface mount connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
803-93-010-20-001000
Mill-max Mfg 803-93-010-20-001000 is a 10-contact, dual-row board connector with tin/lead finish. Featuring beryllium copper contacts on a right-angle socket, it's ideal for PCB mounting applications with 2.54mm terminal pitch and solder termination.
803-93-002-10-002000
Mill-max Mfg's 803-93-002-10-002000 is a 2-row board connector with TIN LEAD finish. Featuring GOLD (30) over NICKEL (100) contacts, it has 2.54mm pitch and solder termination. Ideal for applications requiring female socket connectors on boards.
803-93-008-10-002000
Mill-max Mfg part no. 803-93-008-10-002000 is a 2-row board connector with TIN lead finish, Beryllium Copper contacts, and gold mating finish. It has 8 contacts on a 2.54mm pitch for solder termination. Ideal for applications requiring female socket connectors mounted straight on boards.
803-93-010-30-001000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Filter Feature: NO; Mating Contact Finish: GOLD (30) OVER NICKEL (100);
803-93-004-10-004000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: SOCKET; No. of Rows Loaded: 2; Total No. of Contacts: 4;
803-93-008-10-004000
Mill-max Mfg 803-93-008-10-004000 is a 2-row board connector with 8 contacts. Features Beryllium Copper contact material, TIN LEAD finish, and GOLD mating finish. Ideal for applications requiring female socket connectors on boards with 2.54mm pitch.
803-93-006-10-002000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 803; IEC Conformity: NO; Termination Type: SOLDER;
803-91-082-61-001000
BOARD CONNECTOR; Contact Material: BERYLLIUM COPPER; Termination Contact Finish: TIN LEAD OVER NICKEL; Mating Contact Finish: GOLD (10) OVER NICKEL (100); JESD-609 Code: e0; Manufacturer Series: 803;
803-93-020-30-001000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: BERYLLIUM COPPER; Termination Type: SURFACE MOUNT; DIN Conformance: NO;
803-91-052-62-001000
BOARD CONNECTOR; Manufacturer Series: 803; Contact Material: BERYLLIUM COPPER; Termination Contact Finish: TIN LEAD OVER NICKEL; JESD-609 Code: e0; Mating Contact Finish: GOLD (10) OVER NICKEL (100);
803-93-002-10-001000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Termination Contact Finish: Tin/Lead (Sn/Pb); Filter Feature: NO;
803-93-100-10-004000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: SOCKET; IEC Conformity: NO; Filter Feature: NO;
803-93-006-10-001000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; IEC Conformity: NO; MIL Conformity: NO;
803-93-006-20-001000
803-93-006-20-001000 by Mill-max Mfg is a 2-row board connector with gold over nickel finish. Featuring 6 contacts made of beryllium copper, it has a terminal pitch of 2.54mm and solder termination. Ideal for applications requiring female socket connectors in right angle mounting style.
803-99-040-10-002000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: BERYLLIUM COPPER; DIN Conformance: NO; Mounting Type: BOARD;
803-93-100-61-002-100
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Contact Material: NOT SPECIFIED; Termination Type: PRESS FIT;
803-93-100-61-001
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
803-93-100-10-001
803-93-100-20-001
803-93-100-62-001000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; JESD-609 Code: e0; Mixed Contacts: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved