Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HVQCCN; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 2 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Authorized Procurement Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
West Coast Incorporated
Fixed Regulators - Positive Multiple Output LDO MIC2215-PMMYML-TR attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from Microchip Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Dropout Voltage-2:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
MIC2215-PMMYML-TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
MAX8559ETAJJ
Analog Devices
Analog Devices' MAX8559ETAJJ is a BICMOS LDO regulator with 2 outputs. It offers a max dropout voltage of 0.12 V, operating temperature range from -40 to 150 °C, and a package style of small outline with very thin profile. Ideal for applications requiring fixed positive multiple output regulation in compact spaces.
LP2966IMMX-2830
LP2966IMMX-2830 by Texas Instruments is a fixed positive multiple output LDO regulator with dual terminals. It has a max dropout voltage of 0.27 V, operating temperature range from -40 to 125°C, and a package style of small outline, thin profile, shrink pitch. Ideal for applications requiring precise voltage regulation in compact spaces.
LP2966IMM-2828/NOPB
Texas Instruments LP2966IMM-2828/NOPB is a Fixed Positive Multiple Output LDO Regulator with 2.8V nominal output voltage, 0.27V max dropout voltage, and 0.15A max output current per channel. Ideal for applications requiring stable power supply in compact spaces like portable electronics and IoT devices.
LP8900TLE-AAEB/NOPB
LP8900TLE-AAEB/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.8V and 2.7V output voltages, suitable for applications requiring low dropout voltage and precise voltage regulation. It operates in temperatures ranging from -40 to 125°C, making it ideal for various electronic devices needing stable power supply. The package style is a grid array with very thin profile and fine pitch, providing compact design options for space-constrained projects.
TPS73HD325PWPG4
TPS73HD325PWPG4 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.5V and 3.3V outputs, each supporting up to 0.75A current. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
TPS71247DRC
TPS71247DRC by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.21 V and can handle an operating temperature range from -40 to 125°C. This regulator is suitable for applications requiring precise voltage regulation in compact electronic devices.
LM9072T
LM9072T by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max input voltage of 27V and can deliver up to 0.35A on one output and 0.08A on the other. With a package style of flange mount, it is suitable for applications requiring stable voltage regulation in various electronic devices.
MAX8559ETAO1
Analog Devices' MAX8559ETAO1 is a BICMOS technology-based LDO regulator with 2 outputs. It offers a max dropout voltage of 0.12 V, operating temperature up to 150 °C, and a package style of small outline with heat sink. Ideal for applications requiring fixed positive multiple output regulators in compact spaces.
LP2966IMM-3325/NOPB
LP2966IMM-3325/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.5V and 3.3V outputs, ideal for applications requiring stable voltage supply. It features a max dropout voltage of 0.27V, operating temperature range from -40°C to 125°C, and can handle up to 0.15A output current per channel in a small outline package suitable for surface mount assembly.
MAX8559ETAII-T
Analog Devices' MAX8559ETAII-T is a BICMOS technology-based LDO regulator with 2 outputs. It offers a max dropout voltage of 0.12 V, operating up to 150 °C. Ideal for applications requiring fixed positive multiple output regulators in compact spaces due to its small outline package style and dual terminal position.
CS8481YDPR5
CS8481YDPR5 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage-1 of 3.3V and Max Dropout Voltage-2 of 0.6V, suitable for applications requiring stable voltage regulation in compact designs. Operating Temperature ranges from -40 °C to 150°C, making it versatile for various electronic devices.
LP5996SD-1525
LP5996SD-1525 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.5V and 1.5V nominal output voltages, suitable for applications requiring low dropout voltages of 0.22V and 0.55V. This CMOS technology regulator has a max output current of 0.3A and operates in temperatures ranging from -40°C to 125°C, making it ideal for compact electronic devices needing stable power supply solutions.
NCP3335ADM180R2G
NCP3335ADM180R2G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 1.8V nominal output voltage, 0.34V max dropout voltage, and 0.5A max output current per channel. It is ideal for applications requiring stable power supply in compact spaces, such as IoT devices and portable electronics.
TPS780180300DRVT
TPS780180300DRVT by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with an output voltage of 1.8V and max current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable power supply in compact spaces. The regulator's small outline package with a very thin profile and surface mount capability enhances its versatility in electronic designs.
CS8164YTVA5
CS8164YTVA5 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.7V and 0.6V, suitable for applications requiring stable voltage regulation. With a package style of Flange Mount and operating temperature range from -40 to 150 °C, it is ideal for various electronic devices.
CS8251ET7
CS8251ET7 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 1.8V and operates in temperatures ranging from -40 to 150 °C. Ideal for applications requiring stable voltage regulation in electronic circuits.
LP5996SDX-1018/NOPB
LP5996SDX-1018/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.55V and 0.22V, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature ranges from -40°C to 125°C make it versatile for various electronic devices.
CS8135YTVA5
CS8135YTVA5 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.7V and operates in temperatures ranging from -40 °C to 150°C. Ideal for applications requiring stable voltage regulation in various electronic devices.
TPS71928-28DRVR
TPS71928-28DRVR by Texas Instruments is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.4 V, operating temperature range from -40 to 125 °C, and a package style of small outline. It is suitable for applications requiring stable power supply with low dropout voltage in compact electronic devices.
TPS71918-12DRVT
TPS71918-12DRVT by Texas Instruments is a BICMOS technology-based LDO regulator with 2 outputs. It has a max dropout voltage of 0.4 V, operating temperature range from -40 to 125 °C, and can handle up to 0.2 A output current per channel. Ideal for applications requiring fixed positive multiple output voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved