Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP2542FDT-E/SN by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C temperature range, with 140 mA supply current and 5V nominal voltage. The small outline package has dual terminals in gull wing form, making it ideal for surface mount designs.
Median Price
$1.030
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Microchip Technology
1+ parts
100+ parts
$0.790
1k+ parts
$0.770
10k+ parts
$0.760
Mouser Electronics
$0.860
-
DigiKey
$0.857
Newark
$0.806
$0.771
Master Electronics
$0.843
$0.835
Verical
$1.086
Nova Conductors
$1.180
Maritex
$1.576
Chip Stock
Vyrian
Martec Srl
IBS Electronics
$1.065
Elcom Components
Semicontronic
$0.610
$0.595
$0.592
Vigor
$0.810
Continental Prestige Electronics
$1.156
Argo Parts USA
Netroflash
$1.121
$1.097
Ampacity Inc.
$1.330
Advanced Electronics
$14.497
$13.772
Aztec Data Supply Inc.
$15.560
Corohmni
$16.938
Futuretech Components
Lixinc
Infinite Electronics LLP (Excess)
Marpe Global Electronics
QualityLine Systems
XL Components Corporation
Authorized Procurement Solutions
This material is durable and resistant to impact, making the product robust and long-lasting.
The surface mount feature allows for easy installation on a PCB, saving space and reducing manufacturing complexity.
Having 8 terminals provides sufficient connectivity options for various applications.
With a high maximum operating temperature, this product can perform reliably even in extreme conditions.
Matte tin finish offers good conductivity and corrosion resistance for stable performance.
With a high data rate of 8 Mbps, this product can support fast and efficient data transfer.
Network Interfaces MCP2542FDT-E/SN attributes and parameters. Explore more Network Interfaces devices from Microchip Technology
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
MCP2542FDT-E/SN Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - MCP2542FD/4FD-MCP2542WFD/4WFD 25/Mar/2019 MCP2542FD/4FD-MCP2542WFD/4WFD 14/Aug/2020
PCN Packaging - Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Tesla Elektronicke Soucastky
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
Nte Electronics
Micro Commercial Components
TJA1055T/3/2Z
INTERFACE CIRCUIT; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
TJA1050T/N1
NXP Semiconductors' TJA1050T/N1 is a network interface IC with 8 terminals, operating at 5V. It features a data rate of 1 Mbps and is designed for automotive applications. With a temperature range from -40 to 125°C, this CMOS technology-based chip offers low supply current at 0.075 mA.
IP101GRI
Ic Plus
IP101GRI by Ic Plus is a Network Interface chip with 32 terminals, CMOS technology, and Ethernet transceiver type. It operates in industrial temperature range (-40 to 85 °C) with a low profile (0.9 mm) square package suitable for surface mount applications.
NCV7357D10R2G
Onsemi
NCV7357D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C temperature range and has a nominal voltage of 5V. With a compact rectangular package style and dual terminal position, it offers high reliability in harsh environments.
TJA1040T/CM,118
NXP Semiconductors' TJA1040T/CM,118 is a CMOS interface circuit with 8 terminals and 1 Mbps data rate. It operates at 5V supply voltage, consuming 0.07 mA current. Ideal for network interfaces in automotive applications due to its small outline package and dual terminal position.
KSZ8851-16MLL
KSZ8851-16MLL by Microchip Technology is a network interface with 48 terminals in a square package. It operates b/w 0 to 70°C, with a supply voltage of 1.8V. Ideal for Ethernet transceiver applications due to its low profile and fine pitch design.
SN65HVD1050DR
SN65HVD1050DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps and operates at a nominal voltage of 5V. It is designed for automotive applications, featuring a temperature range from -40 to 125°C and low supply current of 0.07mA.
MCP2003B-E/SN
MCP2003B-E/SN by Microchip: LIN transceiver for telecom apps. Operates at -40 to 125°C, with 12V supply voltage. Small outline package, dual terminals, matte tin finish.
DP83867CRRGZT
DP83867CRRGZT by Texas Instruments is an Ethernet transceiver with a data rate of 1 Gbps. It operates b/w 0-70°C, suitable for commercial applications. This chip carrier has 48 terminals, surface mountable, and features nickel palladium gold terminal finish.
TCAN1044VDRBRQ1
TCAN1044VDRBRQ1 by Texas Instruments is an automotive-grade network interface IC with 8 Mbps data rate, AEC-Q100 screening, and 5 V supply voltage. It comes in a small outline package suitable for surface mount applications in automotive electronics. Operating temperature ranges from -40 to 125°C making it ideal for harsh environments.
DP83848YBX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
TLE9255WSKXUMA2
Infineon Technologies
TLE9255WSKXUMA2 by Infineon Technologies is a small outline network interface IC with 14 terminals, GULL WING form, and 1.27mm pitch. It operates at 5V nominal voltage and AEC-Q100 screening level suitable for automotive applications. The package dimensions are 4mm x 8.75mm x 1.75mm, making it ideal for compact designs in the automotive industry.
KSZ8091RNBCA
Microchip Technology's KSZ8091RNBCA is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at temperatures from 0 to 70°C. It features a square chip carrier package style with matte tin finish and no-lead terminal form, suitable for network interfaces in commercial-grade applications.
MCP2551T-I/SNG
MCP2551T-I/SNG by Microchip: CAN transceiver, 1 Mbps data rate, 5V supply voltage. Ideal for industrial applications requiring network interfaces. Small outline package with dual terminals and matte tin finish.
KSZ8851-16MLLI
KSZ8851-16MLLI by Microchip: Ethernet transceiver with 48 terminals, operates at -40 to 85°C. Package style is flatpack, low profile, fine pitch for industrial applications. Features include CMOS technology, matte tin finish, and 1.8V supply voltage.
TJA1051T/E,118
NXP Semiconductors' TJA1051T/E,118 is a CAN transceiver with 1 Mbps data rate and 5V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has AEC-Q100 screening level. This small outline package with gull wing terminals is ideal for automotive network interfaces.
KSZ9021RNI
Microchip Technology's KSZ9021RNI is a 48-terminal Ethernet transceiver with a data rate of 1000 Mbps. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features a square chip carrier package style and terminal pitch of 0.5mm, ideal for network interfaces in compact applications.
TCAN4550RGYT
TCAN4550RGYT by Texas Instruments is a network interface chip carrier with 20 terminals and a very thin profile. It operates at temperatures ranging from -40 to 125 °C and has a data rate of 5 Mbps. This automotive-grade IC is commonly used in interface circuits for telecom applications.
KSZ9897STXC
Microchip Technology's KSZ9897STXC is an Ethernet transceiver with 128 terminals in a square package. Operating temperature ranges from 0 to 70°C, suitable for commercial use. It features matte tin terminal finish and quad terminal position, ideal for network interfaces.
LAN8710AI-EZK
LAN8710AI-EZK by Microchip Technology is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 3.3V power supply, square package shape, and matte tin terminal finish. Ideal for network interfaces in industrial applications due to its TS16949 screening level and compact chip carrier design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP2551-I/SN
MCP2551-I/SN by Microchip Technology is a CAN transceiver with a data rate of 1 Mbps. It operates at a nominal voltage of 5V and has a max supply current of 75mA. This network interface is commonly used in industrial applications requiring reliable communication.
MCP2551T-I/SN
MCP2551T-I/SN by Microchip: CAN transceiver with 1Mbps data rate, operates at -40 to 85°C. Industrial grade, 5V supply voltage, and 75mA max supply current. Ideal for network interfaces in automotive and industrial applications.
MCP251863T-E/SS
CAN FD TRANSCEIVER;
MCP2562FD-E/SN
MCP2562FD-E/SN by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C, with 70 mA supply current and nominal 5V voltage. The small outline package has dual terminals, matte tin finish, and measures 3.9mm x 4.9mm in size.
MCP2551-I/SNVAO
MCP2551-I/SNVAO by Microchip Tech is a CAN transceiver with 1Mbps data rate, 5V supply voltage, and 75mA max supply current. Ideal for industrial applications, it operates b/w -40 to 85°C and features AEC-Q100 screening level for automotive use.
MCP2551-I/SNG
MCP2551-I/SNG by Microchip: CAN transceiver, 1 Mbps data rate, 5V supply voltage. Ideal for industrial applications. Small outline package with dual terminals and matte tin finish.
MCP2551-E/SN
MCP2551-E/SN by Microchip is a CAN transceiver with 5V supply, 1Mbps data rate, and TS16949 screening. It operates in automotive grade temperature range (-40 to 125°C) and has a small outline package for surface mount applications. Ideal for network interfaces in automotive electronics due to its high reliability and compact design.
MCP2562T-E/SN
MCP2562T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply voltage, and -40 to 125°C temp range. Small outline package with 8 terminals, matte tin finish, and TS16949 screening level.
MCP2562-E/SN
MCP2562-E/SN by Microchip: CAN transceiver for automotive apps. Data rate of 1 Mbps, operates at -40 to 125 °C. Small outline package with 8 terminals, matte tin finish, and nominal voltage of 5 V.
MCP2561-E/SN
MCP2561-E/SN by Microchip Tech is a CAN transceiver with 5V supply, 1Mbps data rate, and 70mA max current. Ideal for automotive applications, it operates b/w -40 to 125°C, in small outline package with dual terminals.
MCP251863T-H/SS
MCP2562T-E/MF
MCP2562T-E/MF by Microchip Tech is a CAN transceiver with 1Mbps data rate, operating at -40 to 125°C. It has 8 terminals, matte tin finish, and small outline package suitable for automotive applications. With a supply voltage of 5V and max current of 70mA, it's ideal for network interfaces in automotive systems.
MCP2562FD-E/MF
MCP2562FD-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125°C. It has 70 mA supply current, suitable for automotive applications due to TS16949 screening and small outline package style.
MCP2562FDT-E/SN
MCP2562FDT-E/SN by Microchip Technology is a CAN FD transceiver with 1 function and a max supply current of 70 mA. It operates at temperatures ranging from -40 to 125 °C and has a data rate of 8 Mbps. This transceiver is commonly used in automotive applications for network interfaces.
MCP2551T-E/SN
MCP2551T-E/SN by Microchip: CAN transceiver, 5V supply, 1Mbps data rate. Automotive grade for network interfaces in vehicles. Small outline package with dual terminals and matte tin finish.
MCP251863T-E/SSVAO
MCP2551-I/P
MCP2551-I/P by Microchip Technology is a CAN transceiver with 5V supply, 1Mbps data rate, and 8 terminals. It operates in industrial temperature range (-40 to 85°C) and has a max supply current of 75mA. Ideal for network interfaces in automotive and industrial applications.
MCP2561T-E/SN
MCP2561T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply, -40 to 125°C temp range. Small outline package with 8 terminals and matte tin finish.
MCP2562-E/MF
MCP2562-E/MF by Microchip Technology is a CAN transceiver with 1 Mbps data rate and 70 mA max supply current. It is commonly used in automotive applications due to its TS 16949 screening level and automotive temperature grade.
MCP2562FDT-E/MF
MCP2562FDT-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125 °C. It has 8 terminals, matte tin finish, and small outline package suitable for automotive applications. The IC supports a nominal voltage of 5 V with a max supply current of 70 mA.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved