Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ATSAME51N19A-AF by Microchip Technology is a 32-bit microcontroller with Cortex-M4F CPU, offering 196608 RAM bytes and 524288 ROM words. It features 16 ADC channels, 2 DAC channels, and 13 timers, making it ideal for automotive applications requiring high-speed processing and connectivity via CAN, Ethernet, I2C, LIN, QSPI, and USB interfaces. With a max clock frequency of 48 MHz and low power mode support, this microcontroller provides efficient performance in automotive systems.
Median Price
$7.810
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Microchip Technology
1+ parts
100+ parts
$6.480
1k+ parts
$5.960
10k+ parts
$5.670
DigiKey
-
Mouser Electronics
Nova Conductors
$7.450
NAC Semi
$8.090
$7.330
$6.710
Vyrian
VNN
Semicontronic
$6.640
$6.474
$6.441
Ampacity Inc.
Corohmni
$6.879
Continental Prestige Electronics
$7.301
Aztec Data Supply Inc.
$69.450
Argo Parts USA
West Coast Incorporated
Lixinc
Netroflash
$7.077
$6.928
The plastic/epoxy body material makes the microcontroller lightweight and durable, making it suitable for various applications.
Having an integrated cache helps improve performance by reducing access times to frequently used data and instructions.
The high maximum supply voltage allows for flexibility in the power requirements of the microcontroller.
Being surface mountable makes installation and assembly of the microcontroller easier and more efficient.
The Cortex-M4F CPU family is known for its high performance and power efficiency, making it a reliable choice for various applications.
The high maximum clock frequency allows for fast processing speeds, making the microcontroller suitable for tasks that require quick response times.
The multiple connectivity options provide versatility in communication protocols, allowing the microcontroller to easily integrate into different systems.
Microcontrollers ATSAME51N19A-AF attributes and parameters. Explore more Microcontrollers devices from Microchip Technology
ADC Channels:
Address Bus Width:
Bit Size:
Boundary Scan:
CPU Family:
Maximum Clock Frequency:
DAC Channels:
DMA Channels:
External Data Bus Width:
Format:
Integrated Cache:
JESD-30 Code:
JESD-609 Code:
Length:
Low Power Mode:
Moisture Sensitivity Level (MSL):
No. of DMA Channels:
No. of External Interrupts:
No. of I/O Lines:
No. of Terminals:
No. of Timers:
On Chip Data RAM Width:
On Chip Program ROM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
PWM Channels:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
RAM Bytes:
RAM Words:
ROM Words:
ROM Programmability:
Screening Level:
Maximum Seated Height:
Speed:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
Data EEPROM Size:
Connectivity:
Peripherals:
Analog To Digital Convertors:
Digital To Analog Convertors:
ATSAME51N19A-AF Peripheral ICs trade compliance attributes, and parameters.
ECCN
5A992.C
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Design/Specification - SAM D5X/E5X 05/May/2020 SAM D5X/E5X 08/Jan/2021
PCN Packaging - MBB/Label Chgs 16/Nov/2018
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM555CM
National Semiconductor
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Temic Semiconductors
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Micro Commercial Components
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
STM32F410CBU6
STM32F410CBU6 by STMicroelectronics is a 32-bit microcontroller with a max clock frequency of 26 MHz. It features 10-Ch 12-Bit ADC channels, 1-Ch 12-Bit DAC channels, and has a square package. This microcontroller is commonly used in industrial applications requiring high-speed processing and analog-to-digital conversion capabilities.
PIC32MZ1024EFG064-I/PT
PIC32MZ1024EFG064-I/PT by Microchip Technology is a 32-bit microcontroller with 64 MHz max clock frequency, 24-Ch 12-Bit ADCs, and 135 mA max supply current. Ideal for industrial applications requiring CAN, Ethernet, I2C, SPI connectivity and low power mode support. Features include 524288 RAM bytes, FLASH ROM programmability, and DMA channels for efficient data transfer.
ATMEGA328P-PU
ATMEGA328P-PU by Microchip: 8-bit RISC CPU, 20 MHz clock, 2/5 V supply. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Contains 6-Ch ADC, 1024 EEPROM size, and peripherals like BOD and PWM(6).
ATSAME70Q21A-ANT
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
MVF61NN151CMK50
NXP Semiconductors
The NXP Semiconductors MVF61NN151CMK50 microcontroller features 16-bit address and external data bus width, with 364 terminals. It operates at a supply voltage range of 1.16V to 1.26V, suitable for industrial applications requiring high-speed processing and extensive I/O capabilities. The device includes DAC and ADC channels, along with DMA support, making it ideal for complex control systems in various industries.
ATSAMD21G18A-MF
ATSAMD21G18A-MF by Microchip Technology is a 32-bit microcontroller with 48 terminals, 16 external interrupts, and 14 ADC channels. It operates at a max clock frequency of 32 MHz and is suitable for automotive applications due to its low power mode and wide temperature range. The chip carrier package style with a very thin profile makes it ideal for space-constrained designs.
ATMEGA8L-8AUR
ATMEGA8L-8AUR by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 8 MHz. It features 1024 bytes of RAM, 512 bytes of data EEPROM, and 4096 ROM words. Ideal for industrial applications requiring low power consumption, it offers connectivity through SPI and USART interfaces along with 3 PWM channels for precise control.
ATMEGA128-16AUR
ATMEGA128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, 64 terminals. Ideal for industrial applications with peripherals like PWM and RTC, featuring 8-channel ADC and SPI/USART connectivity.
STM32L051C8T6TR
STM32L051C8T6TR by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 25 MHz. It features 10-Ch 12-Bit ADC channels and low power mode, suitable for industrial applications requiring high-speed processing and low power consumption. With I2C, SPI, UART connectivity options, it offers versatile interfacing capabilities for various IoT devices.
TMS320F28377DPTPS
TMS320F28377DPTPS by Texas Instruments is a 32-bit microcontroller with 3-Ch 12-Bit DAC and 24-Ch 12-Bit ADC. Ideal for automotive applications, it offers 6 timers, PWM channels, and connectivity options like CAN, I2C, SCI, SPI, USB. Operating temperature ranges from -40 to 125 °C with a max clock frequency of 20 MHz.
AT91SAM9G20B-CU
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 217; Package Code: LFBGA; Package Shape: SQUARE;
MCF5282CVM66J
MCF5282CVM66J by Freescale is a 32-bit microcontroller with 524288 ROM words and 65536 RAM bytes. It operates at speeds up to 66 rpm, suitable for industrial applications requiring high processing power in a compact package. With a temperature range of -40 to 85°C, it's ideal for harsh environments where reliability is crucial.
TMS320F28069PZPS
TMS320F28069PZPS by Texas Instruments is a 32-bit microcontroller with 131072 ROM words, 102400 RAM bytes, and 16-Ch 12-Bit ADC channels. Ideal for automotive applications due to AEC-Q100 screening level, it offers connectivity options like CAN, I2C, SCI(2), SPI(2), UART(2), USB. Operating at up to 80 MHz with low power mode and peripherals including BOR, DMA, POR, PWM(16), TIMER(3), WDT.
STM32F407ZGT6
STM32F407ZGT6 by STMicroelectronics is a 32-bit microcontroller with 144 terminals, operating at up to 50 MHz. It features 2 DAC and 24 ADC channels, suitable for industrial applications requiring CAN, Ethernet, I2C, SPI connectivity. With a wide temperature range of -40 to 85°C and low profile package style, it's ideal for diverse embedded systems.
ATMEGA32U4RC-MU
ATMEGA32U4RC-MU by Microchip: 8-bit AVR RISC CPU, 5.5V max supply, 16MHz clock freq. Ideal for industrial applications with SPI, TWI, USART, USB connectivity and low power mode. Contains BOD, comparator, POR, PWM(14), timer(4), WDT peripherals for versatile use in microcontroller projects.
ATMEGA32U4-MUR
ATMEGA32U4-MUR by Microchip: 5.5V max supply, 8-bit CPU, 16MHz clock freq. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode support. Contains 8-Ch ADC and DAC channels for precise analog to digital conversion.
STM32F103ZET6TR
STM32F103ZET6TR by STMicroelectronics is a 32-bit microcontroller with 144 terminals, featuring a 24-bit address bus width and 32-bit CPU. It offers 21-ch ADC, 2-ch DAC, and peripherals like CAN, USB for industrial applications requiring low power consumption and high-speed processing up to 16 MHz.
STM32F030F4P6TR
STM32F030F4P6TR by STMicroelectronics is a 32-bit microcontroller with 20 terminals, operating at a max clock frequency of 32 MHz. It features ADC and DMA channels, with ROM programmability via FLASH. Ideal for industrial applications requiring a compact form factor and low power consumption.
STM32F429ZGT6
STM32F429ZGT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M4F CPU, 262144 bytes RAM, and 1048576 ROM words. It features 24-Ch 12-Bit ADC, 2-Ch 12-Bit DAC, and supports various peripherals like USB, I2C(3), SPI(6). Ideal for industrial applications requiring high-speed processing at temperatures ranging from -40 to +85 °C.
STM32H733ZGT6
MICROCONTROLLER, RISC;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATSAM3X8EA-AU
Microchip ATSAM3X8EA-AU is a 32-bit microcontroller with Cortex-M3 CPU, 144 terminals, and 20 MHz clock frequency. Ideal for industrial applications, it features DAC and ADC channels, 98304 bytes of RAM, and flash ROM programmability.
ATSAMD21G18A-MU
ATSAMD21G18A-MU by Microchip: 32-bit Cortex-M0 MCU with 3.3V supply, 48 terminals, and 16 external interrupts. Ideal for industrial applications requiring low power mode, featuring DAC and ADC channels, along with multiple connectivity options like I2C, SPI, USART.
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
ATSAMD21G18A-AU
ATSAMD21G18A-AU by Microchip: 32-bit Cortex-M0 CPU, 3.3V supply, 48 terminals. Ideal for industrial applications requiring low power consumption and high clock frequency up to 32MHz. Features integrated cache, DAC channels, and ADC channels for efficient data processing.
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
ATSAMD21J18A-AU
ATSAMD21J18A-AU by Microchip: 32-bit Cortex-M0 CPU, 3.3V supply, 64 terminals. Ideal for industrial applications requiring low power consumption and high clock frequency up to 32MHz. Features integrated cache, DAC channels, and DMA support for efficient data processing.
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE;
Microchip ATSAME70Q21A-ANT is a 32-bit microcontroller with Cortex-M7 CPU, 24 external interrupts, and 24 DMA channels. It features 144 terminals, 20 MHz clock frequency, and industrial temperature grade. Ideal for applications requiring high-speed processing and extensive peripheral support in automotive electronics and industrial automation.
ATSAMD21G18A-AUT
ATSAMD21G18A-AUT by Microchip is a 32-bit microcontroller with 48 terminals, operating at up to 32 MHz. It features 16 external interrupts, 14 ADC channels, and low power mode. Ideal for industrial applications requiring high-speed processing and multiple connectivity options like I2C, SPI, and USART.
ATSAMD21J18A-AUT
ATSAMD21J18A-AUT by Microchip: 32-bit Cortex-M0 CPU, 3.3V supply, 32768 RAM words. Ideal for industrial applications requiring low power consumption and high-speed processing with features like integrated cache, DAC channels, and multiple connectivity options.
ATSAME70Q21A-AN
Microchip Technology's ATSAME70Q21A-AN is a 32-bit microcontroller with Cortex-M7 CPU, 24 address bus width, and 8 on-chip data RAM width. Ideal for industrial applications, it features CAN, I2S, SPI connectivity options and operates at a max clock frequency of 20 MHz. With low power mode and integrated cache, this MCU offers high performance in a compact square package.
ATSAME51J20A-AU
Microchip's ATSAME51J20A-AU is a 32-bit microcontroller with Cortex-M4F CPU, offering 1048576 ROM words and 262144 RAM words. It features 16 ADC channels, 2 DAC channels, and 13 timers suitable for industrial applications requiring high-speed processing up to 48 MHz. With CAN, Ethernet, I2C, LIN, QSPI, and USB connectivity options, it provides versatile peripheral support in a compact square package ideal for space-constrained designs.
ATSAME70N21A-AN
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
Microchip's ATSAME70N21A-AN is a 32-bit microcontroller with Cortex-M7 CPU, offering 2 DAC and 10 ADC channels. It features 24 DMA channels, 12 timers, and peripherals like CAN, I2S, SPI, UART, USART, USB for industrial applications. With a clock frequency of up to 20 MHz and low power mode support, it provides high-speed processing capabilities in a compact form factor.
MICROCONTROLLER, RISC; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved