Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Microchip Technology's AT21CS01-STUM10-T is a 1024-bit EEPROM with I2C serial bus, offering 1000000 write/erase cycles. Operating at -40 to 85°C, it has a supply voltage range of 1.7V to 3.6V and standby current of 0.0000025A. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
Median Price
$0.256
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Farnell
1+ parts
$0.193
100+ parts
$0.191
1k+ parts
-
10k+ parts
$0.190
Microchip Technology
$0.240
$0.220
$0.210
$0.200
Mouser Electronics
$0.260
DigiKey
Newark
$0.268
Adafruit Industries
$0.278
$0.264
Element14
$0.363
$0.337
$0.331
RS (Exports)
$0.248
$0.235
$0.230
Master Electronics
$0.252
Verical
$0.296
$0.292
Arrow
$0.231
Future Electronics
Digiode
$0.183
Nova Conductors
$0.270
Maritex
$0.401
Cyclops Electronics Ltd
IBS Electronics
$0.353
$0.348
Electro Sonic
$0.225
Vyrian
Semtec, LLC
Chip Stock
VNN
Semicontronic
$0.164
$0.160
$0.159
Ampacity Inc.
Corphita
$0.174
Aranea Global
$0.265
$0.254
Modulus Dynamics
Corohmni
Continental Prestige Electronics
Argo Parts USA
$0.262
Advanced Electronics
Vigor
$1.600
Aztec Data Supply Inc.
$3.267
QUARKTWIN TECHNOLOGY LTD
Lixinc
Authorized Procurement Solutions
RGB Technical Solutions
Kepictronics
Eastek
GreenTree Electronics
Robosynatics
$0.259
Lucentia Tech
Supply Digital
Durable material ensures the longevity of the product.
Allows for precise and coordinated timing operations.
Efficient power usage for optimal performance.
Provides sufficient capacity for storage and data organization.
Suitable for a wide range of industrial applications.
High number of write/erase cycles ensures reliability and longevity of data storage.
EEPROM technology allows for non-volatile data storage and easy reprogramming.
EEPROM AT21CS01-STUM10-T attributes and parameters. Explore more EEPROM devices from Microchip Technology
Minimum Data Retention Time:
Endurance:
I2C Control Byte:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Ports:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Peak Reflow Temperature (C):
Programming Voltage (V):
Maximum Seated Height:
Serial Bus Type:
Maximum Standby Current:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Maximum Write Cycle Time (tWC):
AT21CS01-STUM10-T Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
Microsemi
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
25LC1024T-E/SM
25LC1024T-E/SM by Microchip Technology is a 128KX8 EEPROM with 1048576 bit memory density. It operates at 5V, has SPI serial bus type, and offers 1000000 Write/Erase Cycles endurance. Ideal for automotive applications due to AEC-Q100 screening level and -40 to 125 °C operating temperature range.
24LC512-I/ST
24LC512-I/ST by Microchip Technology is an EEPROM with 64KX8 organization, operating at 0.4 MHz clock frequency. It features I2C control byte 1010DDDR and offers 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
DS24B33S+
Analog Devices
Analog Devices' DS24B33S+ is a 1-WIRE serial EEPROM with 4Kx1 organization, operating at -40 to 85°C. It offers 50k write/erase cycles, CMOS technology, and asynchronous mode for industrial applications. The small outline package has a rectangular shape with matte tin terminals and requires 2.8-5.25V supply voltage.
24LC256T-I/SNRVE
24LC256T-I/SNRVE by Microchip Tech is a 32KX8 EEPROM with 262144-bit memory density. It operates in synchronous mode at 0.4 MHz clock frequency and has a 3mA max supply current. Ideal for industrial applications, it offers 1000000 write/erase cycles endurance and supports I2C serial bus communication.
CAT25640VI-G
CAT25640VI-G by Onsemi is a 8Kx8 EEPROM with synchronous operation and SPI serial bus. It has a max clock frequency of 10 MHz and can withstand temperatures up to 85°C. This memory IC is commonly used in industrial applications requiring reliable data storage.
25LC256-I/SM
25LC256-I/SM by Microchip is a serial EEPROM with 32Kx8 organization, SPI interface, and 10MHz clock frequency. It operates at -40 to 85°C, has 1000000 write/erase cycles endurance, and supports hardware/software write protection. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
AT24CM01-SSHM-T
Atmel
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
25AA256-E/ST
25AA256-E/ST by Microchip Technology is a 32KX8 EEPROM with SPI serial bus, 262144 bit memory density, and 1000000 Write/Erase Cycles endurance. Operating in synchronous mode at 10 MHz clock frequency, it's ideal for automotive applications due to AEC-Q100 screening level and -40 to 125 °C temperature range. With small outline package style and 0.65 mm terminal pitch, this EEPROM offers reliable data storage solutions.
XCF02SVOG20C0936
Xilinx
Xilinx XCF02SVOG20C0936 is a 2MX1 EEPROM with 2097152-bit memory density. Operating at 3.3V, it offers industrial-grade performance with -40 to 85°C temperature range. Ideal for configuration memory applications, this serial CMOS device comes in a small outline package with dual terminals and gull wing form factor.
AT25256B-SSHL-B
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Memory Width: 8;
24LC64-I/STG
24LC64-I/STG by Microchip Technology is an 8KX8 EEPROM with a memory density of 65536 bit. It operates at 0.4 MHz clock frequency and has a max supply voltage of 5.5 V. Ideal for industrial applications requiring reliable data storage with up to 1000000 write/erase cycles.
93LC56BT-I/SN
93LC56BT-I/SN by Microchip Technology is a 2048-bit EEPROM with 128x16 organization, operating at 2MHz. It features software write protection, industrial temperature grade, and MICROWIRE serial bus type. Ideal for applications requiring small outline packages and low power consumption in industrial settings.
25AA02E48-I/SN
25AA02E48-I/SN by Microchip Technology is a 256x8 EEPROM with SPI serial bus, 10 MHz clock frequency, and 5V programming voltage. It operates in industrial temperature range (-40 to 85 °C) and has a max endurance of 1M write/erase cycles. Ideal for applications requiring reliable non-volatile memory storage in compact electronic devices.
CAT25256YI-GT3
CAT25256YI-GT3 by Onsemi is a 32KX8 EEPROM with SPI serial bus, 262144 bit memory density, and 1000000 Write/Erase Cycles endurance. It operates at 5 MHz clock frequency, has a supply voltage range of 1.8V to 5.5V, and offers hardware/software write protection. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
24LC256-E/SN
24LC256-E/SN by Microchip Technology is an EEPROM with 32KX8 organization, operating at 4.5V and -40 to 125 °C temperature range. It features I2C control byte 1010DDDR, offers 262144 bit memory density, and supports up to 1M write/erase cycles. Ideal for automotive applications due to its small outline package style and low standby current of 0.000005 Amp.
24AA024-I/MS
24AA024-I/MS by Microchip Technology is a small outline EEPROM with a memory density of 2048 bit. It operates in synchronous mode and has a max clock frequency of 0.4 MHz. It is commonly used in industrial applications for its high endurance of 1000000 write/erase cycles.
AT24CS01-XHM-T
AT24CS01-XHM-T by Microchip: 1024-bit EEPROM with I2C interface, 128x8 organization. Operating at 1MHz, it supports a supply voltage range of 1.7V to 5.5V. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact form factor.
M24C02-WBN6P
M24C02-WBN6P by STMicroelectronics is an EEPROM with 256x8 organization, operating at 5V. It features I2C control byte 1010DDDR and offers 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact rectangular package.
24AA32AT-I/OT
24AA32AT-I/OT by Microchip Tech is a 4Kx8 EEPROM with I2C control byte. Operating at 2.5V, it offers 1000000 write/erase cycles and -40 to 85°C temp range. Ideal for industrial applications requiring low power consumption and reliable data storage.
DS28EC20+
DS28EC20+ by Analog Devices is a 20KX1 EEPROM with 20480-bit memory density. It operates in SERIAL mode, has 200000 Write/Erase Cycles endurance, and uses 1-WIRE serial bus type. Ideal for industrial applications requiring reliable data storage in temperatures ranging from -40 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AT21CS01-STUM10-T
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Width: 1.3 mm;
AT21CS11-STU10-T
Microchip Technology's AT21CS11-STU10-T is a 1024-bit EEPROM with 128x8 organization. Operating in synchronous mode, it has a temperature range of -40 to 85°C. With I2C control byte 1010DDDR, it offers industrial-grade endurance for applications requiring reliable non-volatile memory storage.
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
AT21CS01-MSHM10-T
AT21CS01-MSHM10-T by Microchip Technology is a 128x8 EEPROM with a memory density of 1024 bit. It operates in synchronous mode and has an endurance of 1,000,000 write/erase cycles. This chip is commonly used in industrial applications that require reliable non-volatile memory storage.
AT21CS01-STUM17-T
Microchip Technology's AT21CS01-STUM17-T is a 1024-bit EEPROM with I2C serial bus, offering 1000000 write/erase cycles. Operating at -40 to 85°C, it has a supply voltage range of 1.7V to 3.6V and standby current of 0.0000025Amp. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; No. of Words: 128 words;
AT21CS01-SSHM10-B
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Form: GULL WING;
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage (Vsup): 1.7 V;
AT21CS01-SSHM10-T
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Ports: 1;
AT21CS01-STUM13-T
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AT21CS01-STUM16-T
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Memory Density: 1024 bit;
AT21CS01-STUM14-T
Microchip Technology's AT21CS01-STUM14-T is a 1024-bit EEPROM with I2C serial bus, offering 1000000 write/erase cycles. Operating at -40 to 85 °C, it has a supply voltage range of 1.7V to 3.6V and standby current of 0.0000025Amp. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Organization: 128X8;
AT21CS01-STUM12-T
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Programming Voltage (V): 1.8;
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
AT21CS01-TOHM10-B
EEPROM;
AT21CS01-ST11M10-B
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved