Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
Median Price
$12.665
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$12.790
100+ parts
-
1k+ parts
10k+ parts
Future Electronics
$10.290
Master Electronics
$12.540
$12.420
$12.380
Verical
$14.753
Maritex
$11.458
$9.587
Nova Conductors
$11.760
Chip Stock
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Speed Components Ltd
Electro Sonic
$10.630
$10.110
Zilex Electronics Inc.
IBS Electronics
$13.829
$13.716
Bristol Electronics
LIBRA Elektronik GmbH
Semi Source
Euro-Tech
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Goldney Electronics S.L.
Benley Electronics
$1.750
AZTECH Wire
$5.040
Ampacity Inc.
$8.530
Component Stockers USA
$11.300
$9.300
Aztec Data Supply Inc.
$11.605
Continental Prestige Electronics
$11.525
Netroflash
Advanced Electronics
$13.418
$12.747
Corohmni
$14.083
Semicontronic
$18.570
$18.106
$18.013
Kepictronics
Lixinc
Fulton Briggs Corp.
Epart123
$19.230
GreenTree Electronics
Argo Parts USA
Perfect Parts
Eastek
Network Interfaces KSZ8893MQLI attributes and parameters. Explore more Network Interfaces devices from Micrel
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
KSZ8893MQLI Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site 03/Oct/2019
PCN Packaging - MBB/Label Chgs 16/Nov/2018
Micrel has been acquired by Microchip Technology Inc., a leading provider of mixed-signal, analog and Flash-IP solutions that offers low-risk product development, lower total system cost and faster time to market for thousands of diverse customer applications worldwide. Micrel, Inc. is a leading global manufacturer of IC solutions for the worldwide high-performance linear and power, LAN and timing and communications markets. The Company’s products include advanced mixed-signal, analog and power semiconductors, as well as high-performance communication, clock management, Ethernet switch and physical layer transceiver ICs. Company customers include leading manufacturers of enterprise, consumer, industrial, mobile, telecommunications, automotive, and computer products. Corporation headquarters and state-of-the-art wafer fabrication facilities are located in San Jose, CA, with regional sales and support offices and advanced technology design centers situated throughout the Americas, Europe and Asia. In addition, the Company maintains an extensive network of distributors and reps worldwide.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Onsemi
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Gulf Semiconductor
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM78L05ACMX/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
KSZ8041NL-TR
Microchip Technology
Microchip Technology's KSZ8041NL-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate. Operating at 3.3V, it has a temperature range of 0-70°C and peak reflow temp of 260°C. Ideal for network interfaces, this CMOS technology chip carrier is surface mountable and TS16949 compliant.
KSZ9021RNI
Microchip Technology's KSZ9021RNI is a 48-terminal Ethernet transceiver with a data rate of 1000 Mbps. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features a square chip carrier package style and terminal pitch of 0.5mm, ideal for network interfaces in compact applications.
LAN8741AI-EN
LAN8741AI-EN by Microchip Technology is an Ethernet transceiver with 2 transceivers, operating at 100 Mbps. It has a temperature range of -40 to 85 °C and comes in a square chip carrier package style. Ideal for network interfaces in industrial applications due to its TS 16949 screening level.
88E1111-B2-RCJ1C000
Marvell Technology
Marvell's 88E1111-B2-RCJ1C000 is a CMOS Ethernet transceiver with 128 terminals in a flatpack, fine pitch style. It operates at a nominal voltage of 1V and has matte tin terminal finish. Ideal for network interfaces, this compact device measures 14mm x 20mm with a seated height of 3.4mm.
TCAN1051HVDRBRQ1
Texas Instruments
TCAN1051HVDRBRQ1 by Texas Instruments is a network interface IC with AEC-Q100 screening. It operates b/w -55 to 125°C, has 8 terminals, and supports a data rate of 2 Mbps. Ideal for automotive applications requiring a reliable interface circuit in harsh environments.
MCP2558FD-H/SNVAO
MCP2558FD-H/SNVAO by Microchip Tech is a CAN FD transceiver with 1 function, 8 Mbps data rate, and 70 mA max supply current. Ideal for automotive applications due to AEC-Q100 screening level and TS 16949 certification. Package style: small outline, terminal form: gull wing, suitable for surface mount with dual terminals.
SN65HVD230QDRG4Q1
SN65HVD230QDRG4Q1 by Texas Instruments is an AEC-Q100 compliant interface circuit with a data rate of 1 Mbps. Operating at 3.3V, it features a BICMOS technology and is suitable for automotive applications due to its wide temperature range (-40 to 125 °C) and small outline package style.
DP83849IVS/NOPB
DP83849IVS/NOPB by Texas Instruments is an Ethernet transceiver with 2 transceivers, data rate of 100000 Mbps, and operates at a supply voltage of 3.3V. It is used in network interfaces for industrial applications due to its CMOS technology and operating temperature range from -40°C to 85°C.
KSZ8081RNBIA-G3XX
KSZ8081RNBIA-G3XX by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at -40 to 85 °C. Ideal for industrial applications, features 32 terminals in a square chip carrier package style. TS 16949 screening level ensures high quality and reliability.
ADIN1300BCPZ-R7
Analog Devices
ADIN1300BCPZ-R7 by Analog Devices is a network interface chip carrier with 40 terminals and a very thin profile. It operates in an industrial temperature range of -40 to 85 °C and has a nominal voltage of 1.8 V. This Ethernet transceiver is suitable for telecom applications.
TCAN330GDCNT
TCAN330GDCNT by Texas Instruments is a network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package style, nickel palladium gold finish, and supports data rates up to 5 Mbps. Ideal for automotive applications requiring a 3.3V supply voltage and high-temperature tolerance.
SN65HVD230QDR
SN65HVD230QDR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for automotive applications. It operates at 3.3V nominal voltage and has a max supply current of 0.017mA. This small outline package IC features dual terminals and can withstand temperatures from -40 to 125°C.
TJA1042T/1J
NXP Semiconductors
NXP Semiconductors' TJA1042T/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminal form, and supports a nominal voltage of 5V. Ideal for interface circuits in automotive applications requiring robust communication solutions.
TCAN1042HVDRBRQ1
TCAN1042HVDRBRQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates b/w -55 to 125 °C, suitable for military applications. With a supply voltage of 5 V and max current of 110 mA, it's ideal for automotive network interfaces.
88E1111-B2-BAB2I000
Marvell Technology's 88E1111-B2-BAB2I000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at a nominal voltage of 1V and has a compact size of 10mm width and 14mm length. Ideal for network interfaces, this surface-mount device is designed for telecom applications.
LAN9303M-AKZE
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 72; Package Code: HVQCCN; Package Shape: SQUARE;
TLE9250XLEXUMA1
TLE9250XLEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 0.65mm pitch, and 5V supply voltage. Its small outline package makes it suitable for automotive applications requiring a compact design and high reliability in harsh environments. The no-lead terminal form and thin profile enhance space efficiency while ensuring robust performance.
KSZ8999I
Microchip Technology's KSZ8999I is an Ethernet transceiver with 8 ports, operating at -40 to 85°C. It features a flatpack, fine pitch style with 208 terminals in a square shape. Suitable for network interfaces, it has a low supply voltage of 2.1V and Gull Wing terminal form.
TCAN1042HDRBTQ1
TCAN1042HDRBTQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates b/w -55 to 125 °C, suitable for military applications. This small outline package has 8 terminals and is AEC-Q100 compliant, making it ideal for automotive network interfaces.
WJLXT971ALE.A4SE001
Cortina Systems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KSZ8081RNBIA-TR
Microchip Technology's KSZ8081RNBIA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package style, matte tin finish, and terminal pitch of 0.5 mm. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8895MQXIA
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
Microchip Technology's KSZ8895MQXIA is an Ethernet switch with 5 transceivers, supporting data rate of 100 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 1.2 V. The package style is flatpack, fine pitch, with 128 terminals for surface mount applications.
KSZ8081RNAIA-TR
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8081RNAIA-TR by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package style, matte tin finish, and very thin profile for industrial applications requiring reliable network interfaces.
KSZ8863RLLI
LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8995MAI
KSZ8895RQXIA
KSZ8895RQXIA by Microchip: 128 terminals, 5 transceivers, 100 Mbps data rate. Ideal for Ethernet switch applications in industrial settings. Operates b/w -40 to 85°C with a compact rectangular package design.
KSZ8863RLLI-TR
KSZ8081RNACA
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Microchip's KSZ8081RNACA is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a square chip carrier package style, matte tin finish, and operates b/w 0-70°C. Ideal for network interfaces in commercial applications due to its compact size and low profile design.
KSZ8081RNBCA-TR
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Microchip's KSZ8081RNBCA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at temperatures from 0 to 70°C. It features a square chip carrier package style with matte tin finish, suitable for network interfaces in commercial-grade telecom applications.
KSZ8081RNACA-TR
Microchip's KSZ8081RNACA-TR is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 0-70°C. It features a square chip carrier package style, matte tin finish, and 3.3V supply voltage. Ideal for network interfaces in commercial applications requiring a compact design and high-speed connectivity.
KSZ8081RNACATR
Micrel's KSZ8081RNACATR is a 3.3V Ethernet transceiver with 100Mbps data rate, ideal for network interfaces. It features a square surface mount package style with 24 terminals and operates b/w 0-70°C, making it suitable for commercial applications.
KSZ8081MNXIA-TR
Microchip Technology's KSZ8081MNXIA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package style, matte tin finish, and 3.3V supply voltage. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
KSZ8795CLXIC
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: LFQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved