Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$9.090
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$5.995
1k+ parts
$5.875
10k+ parts
-
Vyrian
Digiode
Anansix
ComSIT Distribution GmbH
AZTECH Wire
$4.050
$3.890
$3.810
$3.740
One Stop Electronics
$4.500
Semicontronic
$5.500
$5.362
$5.335
MARBEL Systems
$14.536
Texas Native Microelectronics
$16.708
$15.538
$14.703
Kenton Components
$20.050
$17.644
Qasali Group International
$45.112
Glotronic Ltd.
Assy Fe
Futuretech Components
Corphita
Switching Regulators & Controllers MAX887HESA-T attributes and parameters. Explore more Switching Regulators & Controllers devices from Maxim Integrated
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MAX887HESA-T Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Maxim Integrated is a leading provider of analog and mixed-signal integrated circuits for a range of industries, including automotive, industrial, communications, consumer, and computing. Founded in 1983 with headquarters in San Jose, California, Maxim has grown to become one of the world’s largest producers of integrated circuits due to its innovative solutions that solve customers’ toughest design challenges. Maxim's broad portfolio includes products such as power management solutions, high-voltage solutions, motor driver solutions, amplifiers and comparators, data converters and interface ICs. For over 35 years, Maxim has continued to push the boundaries of analog integration by providing innovative integrated circuit products that offer the industry’s highest performance and best quality. The company’s commitment to delivering cutting-edge technology enables customers to stay current with changing demands in the market. From automotive check engine lights to fitness trackers worn on the wrist – Maxim enables customers across multiple industries to create groundbreaking products through their advanced IC designs. Maxim Integrated is now officially part of Analog Devices.
President & CEO
Tunc Doluca
Senior VP & CFO
Brian C. White
Senior VP, Technology & Manufacturing Group
Vivek Jain
Fabrication
Fab Initiation
Philippines
Cavite
Wafer Capacity
489,000
USA
Beaverton
312,000
Thailand
Chon Buri
194,000
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LM2576HVT-ADJLF03
National Semiconductor
LM2576HVT-ADJLF03 by National Semiconductor is a VOLTAGE-MODE switching regulator with 5 terminals, capable of 3A output current at a max frequency of 63kHz. Its PLASTIC/EPOXY body and IN-LINE style make it suitable for power supply applications requiring efficient voltage regulation.
LTC1144IS8#PBF
Analog Devices
LTC1144IS8#PBF by Analog Devices is a CMOS switched capacitor converter with 8 terminals, operating b/w -40 to 85°C. It has a max input voltage of 18V and nominal input voltage of 15V, suitable for industrial applications. With a small outline package style and surface mount capability, it offers a max switching frequency of 10 kHz.
LMR16006XDDCR
LMR16006XDDCR by Texas Instruments is a switching regulator with 6 terminals, operating from -40 to 125°C. It offers a max output voltage of 55V and current of 0.6A, suitable for automotive applications due to its compact size (2.9mm x 1.6mm) and pulse width modulation control technique.
LM2574M-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS62110RSARG4
TPS62110RSARG4 by Texas Instruments is a 16-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85°C. It offers a max output voltage of 16V and current of 1.5A, suitable for industrial applications requiring efficient power management in compact spaces.
LM2596DSADJR4G
LM2596DSADJR4G by Onsemi is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a max output current of 7.5A and supports input voltages from 4.5V to 40V, making it ideal for automotive applications requiring voltage-mode control up to 180kHz frequency.
LMR14050SDDAR
LMR14050SDDAR by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125 °C, and output current up to 5A. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and wide input voltage range (4-40V), suitable for various power management needs.
A8498SLJTR-T
Allegro MicroSystems' A8498SLJTR-T is a switching regulator with 5A output current, 1.2kHz max frequency, and 42V nominal input voltage. Ideal for applications requiring current-mode control, such as low-profile electronic devices needing efficient power management in a small outline package.
LMR36520ADDAR
LMR36520ADDAR by Texas Instruments is a switching regulator with 24V nominal input/output voltage, 2A max output current, and 460kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
MC34063AP
Fairchild Semiconductor
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS5430DDAR
TPS5430DDAR by Texas Instruments is a switching regulator with 3A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and pulse width modulation control technique.
TPS40210DGQG4
TPS40210DGQG4 by Texas Instruments is a current-mode switching regulator with a 7-9V output range, ideal for automotive applications. Operating from -40 to 125°C, it supports input voltages from 4.5 to 52V and offers a max switching frequency of 1MHz. The compact package features a small outline design with dual terminals and Gull Wing form factor.
LM2596S-5.0
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646EDE#PBF
LTC3646EDE#PBF by Analog Devices is a current-mode switching regulator with a buck configuration. It operates in an industrial temperature range from -40°C to 85°C, suitable for various applications. With a max input voltage of 40V and nominal output voltage of 5V, it offers efficient power management in compact designs.
LM5007MM/NOPB
LM5007MM/NOPB by Texas Instruments is a switching regulator with a max output voltage of 73V and max output current of 0.5A. It operates in automotive-grade temperatures (-40 to 125°C) making it suitable for automotive applications. With a compact package style, small outline, and thin profile, it is ideal for space-constrained designs.
LM2596SX-3.3/NOPB
LM2596SX-3.3/NOPB by Texas Instruments is a switching regulator with a max output current of 3A, ideal for automotive applications. It operates b/w -40 to 125°C, with a voltage-mode control mode and buck switcher config. With a small outline package style and surface mount capability, it's versatile for various electronic designs.
LM2675MX-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3779EFE#PBF
Linear Technology
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 38; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ14202HTZE/NOPB
LMZ14202HTZE/NOPB by Texas Instruments is a switching regulator with 2A output current, 5-24V output voltage range, and VOLTAGE-MODE control mode. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Features include small outline package, single terminal position, and buck-boost switcher configuration.
UC2825DWTRG4
UC2825DWTRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 2A and a max switching frequency of 1kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring precise voltage regulation in compact designs. The IC features pulse width modulation control technique and push-pull switcher configuration, ideal for applications demanding efficient power conversion with minimal footprint.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAX8647ETE+
Analog Devices' MAX8647ETE+ is a 16-terminal SWITCHED CAPACITOR REGULATOR with BICMOS technology. It operates b/w -40 to 85°C, accepting input voltages from 2.7V to 5.5V and offering a max switching frequency of 1000 kHz. Ideal for industrial applications requiring efficient power management in compact spaces.
Maxim Integrated
SWITCHED CAPACITOR REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
MAX861ESA/V+T
SWITCHED CAPACITOR CONVERTER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MAX828EUK+T
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX828EUK-T
MAX828EUK-T by Maxim Integrated is a small outline, low profile switching regulator with 5 terminals. Operating temperature ranges from -40 to 85°C. Ideal for industrial applications requiring a nominal input voltage of 5V and max switching frequency of 20 kHz.
MAX889TESA+
MAX889TESA+ by Analog Devices is a small outline switching regulator with a max output current of 0.2 A and a max switching frequency of 620 kHz. It is commonly used in industrial applications where a nominal input voltage of 5 V is required.
MAX889TESA
MAX889TESA by Maxim Integrated is a small outline switched capacitor regulator with 8 terminals. Operating from -40 to 85°C, it has a max output current of 0.2A and operates at a frequency of up to 620kHz. Ideal for industrial applications requiring efficient voltage regulation in compact spaces.
SWITCHED CAPACITOR REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX829EUK+T
MAX829EUK-T
MAX829EUK-T by Maxim Integrated is a small outline, low profile switched capacitor converter with 5 terminals. Operating temperature ranges from -40 to 85°C, suitable for industrial applications. Features include a max input voltage of 5.5V and switching frequency of 54.3 kHz.
MAX829EUK+T by Analog Devices is a small outline, low profile switched capacitor converter with 5 terminals. It operates b/w -40 to 85°C and has a max input voltage of 5.5V, making it ideal for industrial applications requiring a compact and efficient switching regulator.
MAX889TESA+T
MAX889TESA-T
Analog Devices' MAX889TESA+T is a small outline switched capacitor regulator with 8 terminals. It operates b/w -40 to 85°C, suitable for industrial use. With a max output current of 0.2 A and switching frequency of 620 kHz, it's ideal for applications requiring efficient power management in compact spaces.
MAX8969EWL50+T
SWITCHING REGULATOR; No. of Terminals: 9; Package Code: VFBGA; Package Shape: SQUARE; Surface Mount: YES; Length: 1.26 mm;
SWITCHING REGULATOR; No. of Terminals: 9; Package Code: VFBGA; Package Shape: SQUARE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel;
MAX831CWE
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX831CWE+
MAX831CWE+ by Maxim Integrated is a switching regulator with a max output current of 1.2 A and a max switching frequency of 100 kHz. It is commonly used in applications that require voltage-mode control, such as power supplies and battery chargers.
MAX852ESA+
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved