Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX845EUA-T by Maxim Integrated is an 8-terminal peripheral driver with a supply voltage range of 4.5V to 5.5V. Operating temperature ranges from -40°C to 85°C, making it suitable for industrial applications. It features a small outline package style and offers a nominal output peak current limit of 1A for buffer or inverter-based interface ICs.
Median Price
$8.380
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$5.499
1k+ parts
$5.370
10k+ parts
-
Nova Conductors
$3.480
Digiode
$8.578
Anansix
Vyrian
Electronics Depot
Sea View Technologies
Bristol Electronics
Continental Prestige Electronics
$3.410
Argo Parts USA
MARBEL Systems
$7.004
Ampacity Inc.
$7.680
Semicontronic
$7.488
$7.450
Texas Native Microelectronics
$8.050
$7.728
$7.486
$7.084
Corphita
$8.127
Kenton Components
$9.660
$8.501
Qasali Group International
$21.735
$20.214
$19.127
Kepictronics
Netroflash
$3.306
$3.236
Microchip USA
This material is durable and reliable, making the product long-lasting.
Allows for easy installation on PCBs, saving space and making the product more compact.
Can handle high voltages, ensuring compatibility with a wide range of systems.
Square shape is easy to handle and mount, providing convenience during assembly.
Enough terminals for connections, enabling versatile use in various applications.
Compact design saves space on the PCB, allowing for more components to be added.
Can operate in extreme low temperatures, suitable for use in harsh environments.
Can operate in high temperatures without malfunctioning, providing reliability in various conditions.
Capable of handling high current output, making it suitable for driving peripherals with varying power requirements.
Versatile interface options for different types of peripherals, enhancing compatibility and flexibility.
Peripheral Drivers MAX845EUA-T attributes and parameters. Explore more Peripheral Drivers devices from Maxim Integrated
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
MAX845EUA-T Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Maxim Integrated is a leading provider of analog and mixed-signal integrated circuits for a range of industries, including automotive, industrial, communications, consumer, and computing. Founded in 1983 with headquarters in San Jose, California, Maxim has grown to become one of the world’s largest producers of integrated circuits due to its innovative solutions that solve customers’ toughest design challenges. Maxim's broad portfolio includes products such as power management solutions, high-voltage solutions, motor driver solutions, amplifiers and comparators, data converters and interface ICs. For over 35 years, Maxim has continued to push the boundaries of analog integration by providing innovative integrated circuit products that offer the industry’s highest performance and best quality. The company’s commitment to delivering cutting-edge technology enables customers to stay current with changing demands in the market. From automotive check engine lights to fitness trackers worn on the wrist – Maxim enables customers across multiple industries to create groundbreaking products through their advanced IC designs. Maxim Integrated is now officially part of Analog Devices.
President & CEO
Tunc Doluca
Senior VP & CFO
Brian C. White
Senior VP, Technology & Manufacturing Group
Vivek Jain
Fabrication
Fab Initiation
Philippines
Cavite
Wafer Capacity
489,000
USA
Beaverton
312,000
Thailand
Chon Buri
194,000
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
BAV99
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
VN5016AJ-E
STMicroelectronics
STMicroelectronics' VN5016AJ-E is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It features CMOS technology, 0.8mm terminal pitch, and SOURCE output current flow direction. Ideal for BUFFER OR INVERTER BASED applications in various industries due to its compact size and robust design.
FPF2100
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
AP2171WG-7
Diodes Incorporated
AP2171WG-7 by Diodes Inc. is a peripheral driver with a max supply voltage of 5.5V and built-in protections for transient, over current, thermal, and under voltage conditions. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 1A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
IRS21844MTRPBF
Infineon Technologies
IRS21844MTRPBF by Infineon is a peripheral driver with 20V max supply voltage, 15V power supplies, and -40 to 125°C operating temp. Ideal for automotive applications, it features built-in transient protection, 0.9us turn-on time, and 2.3A output current limit for half-bridge based systems.
VN808CM-E
VN808CM-E by STMicroelectronics is a peripheral driver with 8 functions, operating at 10.5-32V, and offering built-in protections against various faults. With a max output current of 0.7A, it is suitable for automotive applications requiring a reliable buffer or inverter-based interface IC type. This compact driver has a small outline package style and can withstand temperatures ranging from -40 to 125°C.
VNH7100AS-E
HALF BRIDGE BASED PERIPHERAL DRIVER;
CSD88599Q5DCT
CSD88599Q5DCT by Texas Instruments is a half bridge based peripheral driver with a max supply voltage of 54V and operating temperature range of -55 to 150°C. With 22 terminals in a small outline package, it is ideal for applications requiring source and sink output current flow direction in military-grade environments.
BTS428L2
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Qualification: Not Qualified;
TPS27SA08CQPWPRQ1
TPS27SA08CQPWPRQ1 by Texas Instruments is a peripheral driver with a max supply voltage of 36V, built-in protections for transient, over current, thermal, and under voltage. It is designed for automotive applications with a high side driver feature and can handle a max output current of 10A. The package style is small outline with heat sink/slug and thin profile, making it suitable for compact designs in automotive systems.
DRV104PWPG4
DRV104PWPG4 by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. It operates in industrial temperature grades from -40 to 85°C, making it suitable for various applications requiring a max output current of 1A, such as motor control systems.
TPS2H160AQPWPRQ1
TPS2H160AQPWPRQ1 by Texas Instruments is a peripheral driver with 2 functions, operating at a supply voltage range of 4-40V. Designed for automotive applications, it offers built-in protections against transient events and overcurrent, making it suitable for use in harsh environments. With a compact form factor and high side driver capability, this device ensures efficient performance in automotive systems.
ISP772TFUMA1
ISP772TFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, offering built-in protections against transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring buffer or inverter based peripheral drivers.
E-L6201PS
STMicroelectronics E-L6201PS is a full bridge peripheral driver with 20 terminals. It operates at a nominal voltage of 36V and can handle a max supply voltage of 48V. With built-in thermal protection, it is suitable for various applications requiring source and sink output current flow direction.
ITS711L1FUMA1
ITS711L1FUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow control.
VNS3NV04D-E
VNS3NV04D-E by STMicroelectronics is a peripheral driver with 2 functions, 8 terminals, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 13V to 30V and has a nominal output peak current limit of 5A. This small outline package driver is ideal for applications requiring source and sink output current flow direction.
VNH5200ASTR-E
VNH5200ASTR-E by STMicroelectronics is a half bridge peripheral driver with 16 terminals. It offers built-in protections for over voltage, thermal, and under voltage. With a max supply voltage of 18V and nominal output peak current limit of 8A, it is ideal for applications requiring source and sink current flow control.
BTS712N1XUMA1
BTS712N1XUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline MOS technology device has a nominal output peak current limit of 0.3A and is commonly used as a buffer or inverter based peripheral driver.
TPS22965TDSGRQ1
TPS22965TDSGRQ1 by Texas Instruments is an 8-terminal peripheral driver with a supply voltage range of 2.5V to 5.5V and operating temperature from -40°C to 105°C. It features built-in transient protection, no-lead terminal form, and source/sink current flow direction. Ideal for industrial applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.
TPS272C45DRHFR
TPS272C45DRHFR by Texas Instruments is a peripheral driver with 2 functions, operating voltage range of 6-36V, and built-in protections. It is used in applications requiring open-drain output polarity, with a turn-on time of 65us and turn-off time of 80us.
VN5160STR-E
STMicroelectronics' VN5160STR-E is a peripheral driver with 8-36V power supplies, built-in protections, and 10us turn-on time. Ideal for applications requiring true output polarity, such as buffer or inverter-based interface ICs. Package style: small outline, terminal pitch: 1.27mm, and max supply current of 3.5mA make it versatile for various designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAX845ESA
Maxim Integrated
MAX845ESA by Maxim Integrated is a peripheral driver with 8 terminals, operating voltage range of 4.5V to 5.5V, and industrial temperature grade. It features a small outline package style suitable for buffer or inverter-based applications. With source and sink output current flow direction, it is ideal for various industrial electronic systems.
MAX845ESA+
Analog Devices
MAX845ESA+ by Analog Devices is a CMOS technology-based peripheral driver with 8 terminals. It operates b/w -40 to 85°C, with supply voltage range of 4.5-5.5V. This small outline package IC is ideal for industrial applications requiring buffer or inverter based drivers.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX845ESA+T
MAX845ESA+T by Analog Devices is a small outline peripheral driver with 8 terminals. It operates b/w -40 to 85°C, with supply voltage range of 4.5-5.5V. Ideal for industrial applications requiring buffer or inverter based interface ICs.
MAX845ESA-T
MAX845ESA-T by Maxim Integrated is an 8-terminal peripheral driver with a supply voltage range of 4.5V to 5.5V, suitable for industrial applications. It features a peak current limit of 1A, Gull Wing terminal form, and operates in temperatures from -40°C to 85°C. Ideal for buffer or inverter-based systems requiring source and sink output current flow control.
MAX845EUA+T
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
MAX845ESA/GH9-T
MAX869LEEE+
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX869LEEE
MAX869LEEE by Maxim Integrated is a 16-terminal peripheral driver with built-in protections for over current and thermal issues. Operating at 2.7-5.5V, it offers a peak current limit of 2A and turn-on/off times of 300/30us. Ideal for industrial applications requiring buffer or inverter-based interface ICs in compact designs.
MAX869LEEE+ by Analog Devices is a MOS technology peripheral driver with 16 terminals. It has a max output current of 2A and built-in protections for overcurrent and thermal issues. Ideal for industrial applications requiring a small outline, shrink pitch package style with surface mount capability.
MAX845C/D
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 7; Package Code: DIE; Package Shape: RECTANGULAR;
MAX869LEEE+T
MAX845EUA+
MAX869LC/D
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: DIE; Package Shape: RECTANGULAR;
MAX845ESA+TG55
MAX845ESA+G55
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved