Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; JESD-609 Code: e3;
Median Price
$0.189
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Verical
Chip1Stop
Vyrian
AZTECH Wire
$13.860
Non-linear Resistors V750ZA05P attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Package Style (Meter):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistor Type:
Sub-Category:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V750ZA05P Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Packaging - Inner Packaging for Radial Bulk 16/May/2013
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
Shenzhen Yixinsemi Electronics
Cheng-yi Electronic
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MF-USMF020-2
Bourns
The Bourns MF-USMF020-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 30V, ideal for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with gold over nickel terminal finish. Operating temperature ranges from -40 to 85°C, meeting AEC-Q200, CUL, TUV, and UL standards.
RL3004-2214-122-D1
Amphenol
Amphenol's RL3004-2214-122-D1 is a NTC thermistor with 4000 ohm resistance, suitable for temperature sensing applications. It features a disk package shape, wire terminals, and operates b/w -50°C to 150°C. Ideal for through hole mounting with a high thermal sensitivity index of 4417 K.
1812L125/16DR
Littelfuse
1812L125/16DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm, dual-ended terminals, and rectangular SMT package. It is used for overcurrent protection in various applications. Operating temperature ranges from -40 to 85 °C with max DC voltage of 16 V.
NCP18XQ102J03RB
Murata Manufacturing
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
60R050XU
60R050XU by Littelfuse is a PTC resettable fuse with resistance of 0.5 ohm and operating voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. This non-linear resistor has a max operating temperature of 85°C and min of -40°C, meeting CUL, TUV, and UL standards.
B57330V2103F260
TDK
B57330V2103F260 by TDK is a NTC thermistor with 10000 ohm resistance and 1% tolerance. It has a thermal sensitivity index of 3435 K, making it ideal for temperature compensation applications. With a max operating temperature of 125°C and surface mounting type, this thermistor offers precise and reliable performance in various electronic devices.
1206L005/60WR
Littelfuse 1206L005/60WR is a PTC resettable fuse with 3.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style. With a temperature range of -40 to 85°C, it meets CUL, TUV, and UL standards.
B72580E0250K062
Epcos Ag
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .015 W; No. of Terminals: 2; Maximum Circuit DC Voltage: 31 V; Maximum Energy Absorbing Capacity: 3.7 J;
MF-USHT150KX-2
The Bourns MF-USHT150KX-2 is a PTC resettable fuse with resistance of 0.025 ohm, operating voltage of 9V, and max temp of 125°C. It's used for overcurrent protection in automotive applications due to its AEC-Q200 compliance and surface mount package style.
RUEF250-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .07 ohm; Rated Power Dissipation (P): 1.2 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
RXEF005
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 11.1 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin (Sn); Terminal Shape: WIRE;
NANOSMDC012F-2
TE Connectivity
TE Connectivity's NANOSMDC012F-2 is a PTC thermistor with dual-ended terminals and rectangular package. It is designed for overload protection applications, featuring surface mounting type and one surface terminal shape.
B72214S0250K101
B72214S0250K101 by TDK is a VARISTOR with 25V RMS and 31V DC max circuit voltage. It has a 7J energy capacity, -40 to 105°C operating temp range, and radial terminal placement. Ideal for surge protection in various electronic applications.
V42MLA1206H
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 150 Cel; Maximum Circuit DC Voltage: 42 V;
RXEF090-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; JESD-609 Code: e3; No. of Terminals: 2;
V42MLA1206NH
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Length (Package): 4.06 mm; Height (Package): 1.8 mm;
SIOV-S14K275
Siemens
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Shape (Package): DISK PACKAGE;
RUEF900
Raychem
PTC RESETTABLE FUSE; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin (Sn); Dimensions: 29mm x 24.1mm x 3mm; Height (Package): 3 mm;
1812L035/30DR
1812L035/30DR by Littelfuse is a PTC resettable fuse with resistance of 0.4 ohm. It features dual-ended terminals in a rectangular SMT package. Primarily used for overcurrent protection, it has a max operating temperature of 85°C and can handle up to 30V DC circuits.
2016L050MR-A
PTC RESETTABLE FUSE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V750ZC05PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Technology: METAL OXIDE FILM; Operating Voltage: 585 V; Maximum Circuit DC Voltage: 585 V; JESD-609 Code: e3;
V750ZA05X1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Technology: METAL OXIDE FILM; Minimum Operating Temperature: -55 Cel;
V750ZA05PWX1347
VARISTOR; Manufacturer Series: ZA;
V750ZC05PWX2855
VARISTOR; Manufacturer Series: ZC;
V750ZC05
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 125 Cel; Maximum Energy Absorbing Capacity: 17 J; Maximum Circuit RMS Voltage: 460 V;
V750ZA05PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 85 Cel; JESD-609 Code: e3;
V750ZC05PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Rated Temperature: 85 Cel; Terminal Finish: TIN OVER NICKEL;
V750ZA05X2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Maximum Circuit RMS Voltage: 460 V;
V750ZA05PWX2855
V750ZC05PWX1347
V750ZC05P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Finish: TIN; Minimum Operating Temperature: -55 Cel; Maximum Circuit RMS Voltage: 460 V;
V750ZA05PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Technology: METAL OXIDE FILM; Maximum Circuit RMS Voltage: 460 V; Terminal Finish: TIN; Maximum Energy Absorbing Capacity: 17 J;
V750ZC05PX10
V750ZA05PWX10
V750ZA05X10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 615 V; Maximum Energy Absorbing Capacity: 17 J;
V750ZA05
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 615 V; Terminal Finish: Tin/Lead (Sn/Pb);
V750ZA05PW
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Circuit RMS Voltage: 460 V; Terminal Shape: WIRE; Package Style (Meter): Radial;
V750ZA05PX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Packing Method: BULK;
V750ZC05PWX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 460 V; JESD-609 Code: e0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved