Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Non-linear Resistors V385LA10CPX10 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Resistor Type:
V385LA10CPX10 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
ROHM
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
V5.5MLA0805LNHAUTO
Littelfuse
V5.5MLA0805LNHAUTO by Littelfuse is a VARISTOR with 5.5V operating voltage, 0.1J energy absorption, and 4V RMS circuit voltage. Ideal for automotive applications due to AEC-Q200 standard compliance and surface mounting type.
PRG18BB330MB1RB
Murata Manufacturing
Murata Manufacturing's PRG18BB330MB1RB is a PTC resettable fuse with 33 ohm resistance and 20% tolerance. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. With a rated AC voltage of 24V, it operates b/w -20 to 75°C, meeting CUL and UL standards.
MF-PSMF035X-2
Bourns
The Bourns MF-PSMF035X-2 is a PTC resettable fuse with resistance of 0.25 ohm, suitable for overcurrent protection. It features dual-ended terminals in a rectangular SMT package, with gold (Au) finish and nickel (Ni) barrier. Operating temperature ranges from -40 to 85 °C, making it ideal for various electronic applications.
B59707-A120-A62
TDK
TDK's B59707-A120-A62 is a non-linear resistor with a resistance of 125 ohm and a tolerance of 25%. It is used for overload protection in various applications, featuring dual-ended terminal placement and a rectangular package shape.
MF-SM150-2
The Bourns MF-SM150-2 is a PTC resettable fuse with resistance of 0.06 ohm and operating voltage of 15V. It features dual-ended terminals, SMT package style, and matte tin finish. Ideal for overcurrent protection applications, it has a temperature range from -40 to 85°C and meets AEC-Q200, CUL, TUV, and UL standards.
RXEF185K-2
TE Connectivity
TE Connectivity's RXEF185K-2 is a PTC resettable fuse with resistance of 0.19 ohm and rated power dissipation of 2.1W. Ideal for temperature sensing applications, it operates at temperatures ranging from -40 to 85°C with a max AC voltage of 72V. Its radial terminal placement and disk package shape make it suitable for through-hole mounting in various electronic devices.
V33MLA1206NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Height (Package): 1.8 mm; Maximum Energy Absorbing Capacity: .8 J; Package Style (Meter): SMT;
RXEF050
TE Connectivity's RXEF050 is a PTC resettable fuse with 1.17 ohm resistance and rated power dissipation of 0.77 W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and radial terminal placement for easy installation in through-hole mounts.
MF-R030-2
Bourns MF-R030-2 is a PTC resettable fuse with resistance of 0.76 ohm, operating voltage of 60V, and max temp of 85°C. It is used in applications requiring radial terminal placement, such as overcurrent protection in electronic circuits.
USP12837
Littelfuse USP12837 is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3892 K. Ideal for temperature sensing applications, it has radial terminal placement and operates b/w -55°C to 125°C. Package style is chassis mount with flexible wire terminals.
GA10K3MBD1
TE Connectivity's GA10K3MBD1 is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a lead length of 56mm, it is ideal for temperature sensing applications.
B72225S4421K101
The TDK B72225S4421K101 is a VARISTOR with 700J energy capacity, 420V RMS voltage, and 560V operating voltage. Ideal for surge protection in applications requiring high energy absorption like power supplies and industrial equipment. With radial terminal placement and metal oxide film technology, it operates b/w -40°C to 85°C.
B72214S0441K101
The TDK B72214S0441K101 is a VARISTOR with 95J energy capacity, 440V RMS voltage, and 585V operating voltage. Ideal for surge protection in applications requiring high energy absorption like power supplies and industrial equipment. With radial terminal placement and metal oxide technology, it operates b/w -40°C to 105°C efficiently.
GA10K3A1AM
TE Connectivity's GA10K3A1AM is a non-linear resistor with 10000 ohm resistance, suitable for temperature sensing applications. With a rated temperature of 25°C to 90°C, it features radial terminal placement and chassis mount package style. Its thermal sensitivity index is 3976 K, making it ideal for precise temperature measurements in various electronic devices.
MF-USMF020-2
The Bourns MF-USMF020-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 30V, ideal for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with gold over nickel terminal finish. Operating temperature ranges from -40 to 85°C, meeting AEC-Q200, CUL, TUV, and UL standards.
1812L075/24DR
1812L075/24DR by Littelfuse is a PTC resettable fuse with resistance of 0.11 ohm. It features dual-ended terminals, rectangular SMT package, and matte tin finish. Ideal for overcurrent protection applications, it has an operating temperature range from -40 to 85°C and meets CUL, TUV, and UL standards.
B72214-S251-K101
The TDK B72214-S251-K101 is a VARISTOR with 65J energy capacity, rated for 250V AC and 320V DC. With METAL OXIDE FILM tech, it operates b/w -40°C to 85°C. Ideal for surge protection in circuits requiring high voltage tolerance.
B57164-K103-J
TDK's B57164-K103-J NTC Thermistor has a resistance of 10000 ohm with 5% tolerance. It operates b/w -55°C to 125°C, making it ideal for temperature compensation applications. With a rated power dissipation of 0.45W and thermal sensitivity index of 4300K, it is suitable for through hole mounting in various electronic devices.
192-103LEW-A01
Fenwal Electronics
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 70 Cel; Manufacturer Series: 192; Shape (Package): DISK PACKAGE;
MF-R110-0
The Bourns MF-R110-0 is a PTC resettable fuse with resistance of 0.1 ohm, operating voltage of 30V, and dimensions of 24.2mm x 3mm x 32.9mm. It is used in applications requiring overcurrent protection in electronic circuits due to its non-linear resistor properties and radial terminal placement for through-hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V385LA20APW
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Height (Package): 20.5 mm; Packing Method: BULK; Technology: METAL OXIDE;
V385LA10PX10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 505 V; Terminal Placement: RADIAL;
V385LA10CPX2855
V385LA20A
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WIRE; No. of Terminals: 2;
V385LA10PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Rated Temperature: 85 Cel;
V385LA10PWX1347
VARISTOR; Manufacturer Series: LA;
V385LA20APWX10
VARISTOR; Manufacturer Series: ZA;
V385LA10CP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Reference Standard: CECC42201-006; Additional Features: IEC61051-1; Terminal Shape: WIRE;
V385LA10PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Shape (Package): DISK PACKAGE;
V385LA10P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WIRE; Diameter (Package): 12.5 mm;
V385LA10X2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Terminal Placement: RADIAL; Packing Method: BULK;
V385LA10X10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: BULK; Terminal Placement: RADIAL; Minimum Operating Temperature: -55 Cel;
V385LA10PWX10
V385LA20AP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Diameter (Package): 17 mm; Additional Features: STANDARD: IEC61051-1; IEC61051-2; IEC60950-1;
V385LA10CPX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 150 Cel; Terminal Shape: WIRE; Reference Standard: CECC42201-006, CSA, VDE; Minimum Operating Temperature: -55 Cel;
V385LA10PWX2855
V385LA10
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Reference Standard: CECC42201-006; Package Style (Meter): Radial;
V385LA10PW
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 51 J; Maximum Circuit RMS Voltage: 385 V;
V385LA10X1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e0; Operating Voltage: 505 V;
Intersil
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e0; Maximum Energy Absorbing Capacity: 51 J; Package Style (Meter): Radial; Terminal Finish: Tin/Lead (Sn/Pb);
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved