Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
V275LA40CP by Littelfuse is a VARISTOR with 275V max circuit RMS voltage, 320J max energy absorption, and 1W rated power dissipation. Ideal for surge protection in applications requiring non-linear resistors like industrial equipment and electronic devices.
Median Price
$0.691
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Arrow
1+ parts
$0.291
100+ parts
-
1k+ parts
10k+ parts
Newark
$0.662
$0.544
$0.471
$0.453
Farnell
$0.720
$0.417
$0.370
Mouser Electronics
$1.020
$0.587
$0.552
DigiKey
$0.509
$0.482
Element14
$1.370
$0.752
$0.722
TTI
$0.499
$0.238
$0.235
Future Electronics
$0.245
$0.225
Chip1Stop
$0.423
Verical
$1.061
$0.950
TME
$0.970
$0.550
$0.506
$0.500
IBS Electronics
$0.349
$0.713
NAC Semi
$0.408
$0.377
Vyrian
ACDS - Activité Composants Distribution Service
Cyclops Electronics Ltd
Rutronik
$0.406
$0.398
Nova Conductors
Sensible Micro Corp
Bristol Electronics
Atlantic Semiconductor
Flex Direct, LLC
Continental Prestige Electronics
$0.980
$0.683
$0.416
Component Stockers USA
$1.150
$0.760
$0.540
CoreStaff
$1.389
$0.573
$0.526
Metaverse IC Inc.
Perfect Parts
Authorized Procurement Solutions
Kepictronics
GreenTree Electronics
Aranea Global
The high rated temperature ensures reliable performance in various operating conditions.
This high energy absorbing capacity makes it suitable for protecting electronic equipment from voltage surges and transients.
The high maximum operating temperature ensures stability and longevity of the product even in extreme temperature environments.
The low minimum operating temperature allows the product to function effectively in cold environments.
The through hole mounting type makes installation easy and secure, providing reliable connection to the circuit board.
Non-linear Resistors V275LA40CP attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Additional Features:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistor Type:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
V275LA40CP Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
NSN
5915-01-565-2438, 5915015652438
NIIN
015652438
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Dc Components
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Tak Cheong Electronics Holdings
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
B72214S2271K101
TDK
B72214S2271K101 by TDK is a VARISTOR with 350V operating voltage and 275V max RMS circuit voltage. With METAL OXIDE FILM technology, it offers high energy absorption up to 110J, making it ideal for surge protection applications in various electronic devices. Its RADIAL package style and THROUGH HOLE mounting type ensure easy installation and reliable performance in extreme temperature conditions from -40°C to 105°C.
RF1353-000
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .25 ohm; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 13.2 V;
TRF250-180
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .8 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: FLAT; Terminal Placement: RADIAL;
MF-SM075/60-2-99
Bourns
Bourns MF-SM075/60-2-99 is a PTC resettable fuse with 60V URac, 1.7W power dissipation, and -40 to 85°C operating range. It's used for overload protection in various applications due to its dual-ended terminals and surface mounting type.
MF-R090
The Bourns MF-R090 is a PTC resettable fuse with resistance of 0.14 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It features radial terminal placement and wire-shaped terminals in a disk package style. Ideal for overcurrent protection in various electronic applications.
RF1403-000
TE Connectivity
TE Connectivity's RF1403-000 is a PTC resettable fuse with resistance of 0.15 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for overcurrent protection applications, it features SMT package style, matte tin over nickel terminal finish, and CSA/TUV/UL reference standards.
55002
Ysi
NTC THERMISTOR; No. of Terminals: 2;
V39ZA6P
V39ZA6P by Littelfuse is a VARISTOR with 25V max circuit RMS voltage and 6J energy absorbing capacity. With METAL OXIDE FILM technology, it operates b/w -55°C to 125°C. Ideal for surge protection in various applications due to its DISK PACKAGE shape and THROUGH HOLE mounting type.
MINISMDC020F-2
TE Connectivity's MINISMDC020F-2 is a PTC resettable fuse with 30V URac. It features dual terminal placement in a rectangular package for overload protection applications. With a max operating temperature of 85°C, it is designed for surface mounting with wraparound terminals.
RF1350-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: RESISTANCE MIN IS 3.6 OHMS; Packing Method: TR; JESD-609 Code: e3;
PTCCL09H171HBE
Vishay Intertechnology
Vishay Intertechnology PTCCL09H171HBE is a 22 ohm PTC thermistor with 20% tolerance. It offers overload protection at rated AC voltage of 265 V, with operating temperatures from -25 to 125 °C. Ideal for through hole mounting in applications requiring radial terminal placement and disk package shape.
B72214S350K551
Epcos Ag
B72214S350K551 by Epcos Ag is a METAL OXIDE FILM VARISTOR with 10J energy capacity, 35V RMS voltage, and 45V operating voltage. Ideal for THROUGH HOLE MOUNT applications requiring surge protection in circuits with up to 45V DC voltage.
VCAT06AG18120YAT1A
KYOCERA AVX
VCAT06AG18120YAT1A by KYOCERA AVX is a VARISTOR with 2 terminals, operating voltage of 18V, and max circuit RMS voltage of 14V. It is designed for non-linear resistor applications in automotive electronics due to its AEC-Q200 reference standard compliance and surface mounting type.
B72650-M301-K72
The TDK B72650-M301-K72 is a VARISTOR with 2 terminals, DUAL placement, and J BEND shape. It has a max energy capacity of 9.6J and operates b/w -40 to 85°C. Ideal for applications requiring protection against voltage surges up to 385V in surface mount configurations.
NTHS0603N02N1002JE
Vishay Intertechnology's NTHS0603N02N1002JE is a 10k ohm NTC thermistor with 5% tolerance, suitable for temperature compensation applications. It has a thermal sensitivity index of 3486 K and can operate b/w -40°C to 125°C. The dual-ended rectangular package with wraparound terminals allows for easy surface mount installation.
B72520T0350K062
B72520T0350K062 by TDK is a VARISTOR with max. circuit RMS voltage of 35V and operating voltage of 45V. It has a max. energy absorption capacity of 0.4J, suitable for surge protection applications in electronics due to its dual-ended terminal placement and surface mounting type.
B72220P3271K101
B72220P3271K101 by TDK is a VARISTOR with 280J energy capacity, 275V RMS voltage, and 350V operating voltage. It has a radial shape for through-hole mounting applications in non-linear resistor circuits.
2920L030DR
2920L030DR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. This thermistor has dimensions of 7.98mm x 5.44mm x 1.25mm and operates b/w -40°C to 85°C.
ASMD075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .29 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Finish: Tin (Sn);
55015
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V275LA20AP
V275LA20AP by Littelfuse is a varistor with 275V URac and 369V operating voltage. With a max energy absorption of 75J, it's ideal for temperature compensation applications at temperatures ranging from -55°C to 125°C. This metal oxide film technology varistor has radial terminal placement and matte tin finish in a disk package shape.
V275LA20APX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Maximum Energy Absorbing Capacity: 75 J; Rated AC Voltage (URac): 275 V;
V275LA20APX1347
V275LA20APX1347 by Littelfuse is a VARISTOR with 275V URac, 75J energy capacity, and -55 to 125°C operating temp. Used for TEMPERATURE COMPENSATION in circuits requiring protection against voltage surges. RADIAL package style with THROUGH HOLE MOUNT for easy installation.
V275LA20APW
V275LA20APW by Littelfuse is a VARISTOR with 275V max circuit RMS voltage, 75J energy capacity, and -55 to 125 °C operating temp. Ideal for surge protection in various applications due to its METAL OXIDE technology and THROUGH HOLE MOUNT design.
V275LA40AP
V275LA40AP by Littelfuse is a varistor with 275V rated AC voltage and 369V operating voltage. With a max energy absorption of 140J, it's ideal for temperature compensation applications. This metal oxide film technology varistor has radial terminal placement and operates b/w -55°C to 125°C.
V275LA40APX10
V275LA40APX10 by Littelfuse is a 275V varistor with 140J energy capacity. It operates b/w -55°C to 125°C, ideal for temperature compensation applications. With radial terminal placement and metal oxide film technology, it offers reliable protection in bulk packaging.
V275LA40APX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 125 Cel; Terminal Placement: RADIAL; Maximum Circuit DC Voltage: 369 V;
V275LA40APX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 369 V; Minimum Operating Temperature: -55 Cel;
V275LA20A
Harris Semiconductor
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 369 V; Technology: METAL OXIDE FILM;
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Length (Package): 17 mm; Maximum Circuit RMS Voltage: 275 V;
General Electric Solid State
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Technology: METAL OXIDE FILM; Maximum Circuit RMS Voltage: 275 V; Operating Voltage: 369 V; Package Style (Meter): Radial;
Intersil
Non-linear Resistors; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -55 Cel; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 75 J;
Thomson Consumer Electronics
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Operating Voltage: 369 V; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: 75 J; JESD-609 Code: e0;
V275LA20CP
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Terminal Finish: TIN; No. of Terminals: 2;
V275LA2P
V275LA2P by Littelfuse is a VARISTOR with 275V URac, 23J energy capacity, and -55 to 125°C operating temp. Used for TEMPERATURE COMPENSATION in circuits requiring protection against voltage surges. RADIAL package style with THROUGH HOLE MOUNT ideal for various electronic applications.
V275LA4PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Diameter (Package): 9 mm; No. of Terminals: 2;
V275LT20A
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 75 J;
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Shape (Package): DISK PACKAGE; Reference Standard: CECC42201-006;
Non-linear Resistors; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 75 J; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Circuit DC Voltage: 369 V;
V275LA10P
V275LA10P by Littelfuse is a varistor with 275V URac, 45J energy capacity, and -55 to 125°C operating range. It's used for temperature compensation in circuits, featuring radial terminal placement and metal oxide film technology. Ideal for through-hole mounting applications requiring high voltage protection.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved