Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Reference Standard: UL RECOGNIZED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Silicon Controlled Rectifiers (SCR) S8X8BS1 attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Littelfuse
Additional Features:
Configuration:
Maximum DC Gate Trigger Current:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Reference Standard:
Repetitive Peak Off-state Voltage:
Repetitive Peak Reverse Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
S8X8BS1 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148
First Components International
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
Comchip Technology
VS-16TTS12S-M3
VS-16TTS12S-M3 by Vishay Intertechnology is a single SCR with 1200V repetitive peak reverse voltage and 16A max RMS on-state current. Ideal for applications requiring high power control in compact spaces, such as industrial automation systems or motor drives.
VS-40TPS12LHM3
SCR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
2N1599
Powerex
SCR; Surface Mount: NO; Maximum DC Gate Trigger Current: 10 mA; Maximum Operating Temperature: 125 Cel; Nominal Circuit Commutated Turn-off Time: 10 us; Maximum On-state Current: 1.6 A;
VS-VSKT16216PBF
VS-VSKT16216PBF by Vishay Intertechnology is a Silicon Controlled Rectifier with 1.54V Max On-state Voltage, 150mA Max DC Gate Trigger Current, and 5100A Non Repetitive Peak On-state Current. Ideal for applications requiring high current handling capabilities in industrial power control systems.
2N5062
Eic Semiconductor
SCR; Surface Mount: NO; Maximum DC Gate Trigger Current: .2 mA; Maximum DC Gate Trigger Voltage: .8 V; Non Repetitive Peak On-state Current: 10 A; Maximum On-state Voltage: 1.7 V;
JANTX2N2324AS
New England Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-30 Code: O-MBCY-W3;
BT151S-800R,118
BT151S-800R,118 by NXP Semiconductors is a Silicon Controlled Rectifier with 15mA DC Gate Trigger Current, 100A Non Repetitive Peak On-state Current, and 7.5A Max On-state Current. It is used in applications requiring SCR technology for power control circuits due to its high current capabilities and small outline package style.
B612F-2T
Cynergy3 Components
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: BRIDGE, HALF-CONTROLLED, COMMON CATHODE WITH BUILT-IN DIODE; Case Connection: ISOLATED;
MCC26-12IO8B
Littelfuse
MCC26-12IO8B by Littelfuse is a SERIES CONNECTED SCR with 27A Max On-state Current, 520A Non Repetitive Peak Current, and 1200V Repetitive Peak Off-state Voltage. Ideal for applications requiring high current switching such as industrial power control systems.
C106D1
The Onsemi C106D1 is a single SCR with max. on-state current of 4A, non-repetitive peak on-state current of 20A, and max. DC gate trigger current of 0.2mA. It is used in applications requiring reliable switching at temperatures ranging from -40°C to 110°C, such as power control circuits and motor drives.
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Holding Current: 5 mA;
MCMA110P1600TA
MCMA110P1600TA by Littelfuse is a Silicon Controlled Rectifier with 200mA DC Gate Trigger Current, 2050A Non Repetitive Peak On-state Current, and 110A Max On-state Current. Ideal for applications requiring high voltage control such as industrial power supplies and motor drives.
2N1595
Solid State Devices
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum DC Gate Trigger Voltage: 3 V;
2N1916
National Electronics
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Minimum Operating Temperature: -40 Cel; Non Repetitive Peak On-state Current: 1000 A; Maximum On-state Current: 70 A;
2N687
2N687 by Texas Instruments is a Silicon Controlled Rectifier with 30mA DC Gate Trigger Current, 150A Non Repetitive Peak On-state Current, and 16A Max On-state Current. It operates b/w -60°C to 125°C and has a max DC Gate Trigger Voltage of 3V. Ideal for applications requiring high current switching capabilities.
Asi Semiconductor
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Maximum On-state Current: 4 A; Maximum Leakage Current: .1 mA; Minimum Operating Temperature: -40 Cel;
2N1599 by Texas Instruments is a SCR with 15A peak on-state current, 10mA gate trigger current, and 1.6A max on-state current. It is used in applications requiring reliable switching at temperatures ranging from -60°C to 125°C.
VS-16TTS12-M3
VS-16TTS12-M3 by Vishay Intertechnology is a single SCR with 10A max on-state current, 200A non-repetitive peak current, and 1200V repetitive peak reverse voltage. Ideal for applications requiring high power control in industrial settings due to its robust design and wide operating temperature range from -40°C to 125°C.
F1857HD1200
Crydom
The Crydom F1857HD1200 is a single SCR with built-in diode, featuring a max on-state current of 55A and repetitive peak reverse voltage of 1200V. Ideal for applications requiring high power control such as industrial machinery and motor drives.
F18107SDK1400
The Crydom F18107SDK1400 is a SERIES CONNECTED SCR with 150mA DC Gate Trigger Current, 2250A Non Repetitive Peak On-state Current, and 1400V Repetitive Peak Reverse Voltage. Ideal for high-power applications requiring reliable switching capabilities in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
S8X8ES2AP
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Additional Features: HIGH RELIABILITY;
S8X8BSRP
S8X8BS1RP1
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Qualification: Not Qualified;
S8X8ES1RP1
Silicon Controlled Rectifiers;
S8X8ES
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
S8X8BS2RP1
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Additional Features: SENSITIVE GATE;
S8X8ES2RP
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Form: THROUGH-HOLE;
S8X8BSRP1
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; JESD-30 Code: R-PSSO-F3;
S8X8BS2
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
S8X8ES1RP
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum DC Gate Trigger Current: .005 mA;
S8X8ES1
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 125 Cel;
S8X8BS2RP
S8X8ES2
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum On-state Current: .8 A;
S8X8BS1RP
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Terminal Finish: Matte Tin (Sn);
S8X8BSAP
S8X8BS
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; JESD-609 Code: e3;
S8X8BS1AP
S8X8BS2AP
S8X8ES1AP
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved