Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CPC1909J by Littelfuse is a SINGLE solid state relay with a max forward current of 0.1A and max on-state current of 6.5A. Featuring a transistor output SSR, it offers an isolation voltage of 2500V, making it ideal for applications requiring reliable switching in industrial settings at temperatures ranging from -40 to 85°C.
Median Price
$13.500
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$9.260
100+ parts
$6.950
1k+ parts
$5.790
10k+ parts
-
Chip1Stop
$6.650
$6.500
Element14
$16.110
$12.090
$9.390
Mouser Electronics
$18.490
$16.860
$15.550
DigiKey
$21.520
$17.068
$15.736
Verical
$6.803
Future Electronics
$12.290
Nova Conductors
$7.900
Ozdisan Elektronik
$46.656
Chip Stock
Vyrian
NAC Semi
$28.580
IBS Electronics
$9.635
$9.411
Aztec Data Supply Inc.
$0.277
Advanced Electronics
$0.446
$0.424
Corohmni
$0.745
Continental Prestige Electronics
$5.500
Aranea Global
$7.742
$7.432
Component Stockers USA
$11.150
Semicontronic
$13.150
$12.821
$12.756
Authorized Procurement Solutions
Argo Parts USA
Robosynatics
$35.641
Lucentia Tech
GreenTree Electronics
A-Plus Industry Inc.
The single configuration simplifies installation and reduces complexity.
Low maximum forward current ensures safe operation.
Transistor output SSR provides reliable performance.
High maximum operating temperature allows for versatile use.
Compact height facilitates easy integration in various applications.
Wide temperature range ensures functionality in harsh environments.
Matte tin finish offers corrosion resistance and durability.
Low on-state resistance leads to efficient operation.
High isolation voltage ensures safety and protection.
Space-saving length for more efficient use of PCB real estate.
Through-hole mounting simplifies installation and enhances stability.
High maximum on-state current allows for handling higher loads.
Solid State Relays CPC1909J attributes and parameters. Explore more Solid State Relays devices from Littelfuse
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Resistance:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Length:
Terminal Finish:
CPC1909J Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.95.00
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ROHM
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
1N4148WT
Bytesonic Electronics
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
HD60125
Crydom
The Crydom HD60125 is a solid state relay with a max on-state current of 125A and control voltage of 3V. With optoelectronic trigger output, it operates b/w -40°C to 80°C making it suitable for DC input applications requiring high isolation voltage up to 4000V.
DC100D40C
Sensata Technologies
TRANSISTOR OUTPUT SSR; Maximum On State Resistance: .015 ohm; Maximum Forward Current: .012 A; Maximum On State Current: 40 A; No. of Elements: 1; Maximum Operating Temperature: 80 Cel;
CPC1779J
Littelfuse
CPC1779J by Littelfuse is a SINGLE solid state relay with a max forward current of 0.1A and optoelectronic type TRANSISTOR OUTPUT SSR. It has a max operating temperature of 85°C, making it suitable for applications requiring high isolation voltage up to 2500V and on-state current of 1.65A in temperatures ranging from -40°C to 85°C.
LCA710STR
Littelfuse LCA710STR is a single solid state relay with 0.01 A control current and 1 A max on-state current. Featuring MOSFET output circuit, it operates b/w -40 to 85 °C, ideal for DC input applications requiring high isolation voltage of 3750 V.
LH1501BAB
Vishay Intertechnology
Vishay Intertechnology's LH1501BAB is a single solid state relay with a control current of 0.0002 A and max forward current of 0.05 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85°C, making it suitable for DC input applications requiring up to 3750 V isolation voltage.
PVT412ASPBF
Infineon Technologies
PVT412ASPBF by Infineon is a SINGLE MOSFET SSR with 0.003 A control current, 0.025 A max forward current, and 6 ohm max on-state resistance. Ideal for applications requiring AC/DC input type, it offers 4000 V isolation voltage and operates b/w -40 to 85 °C, making it suitable for various solid state relay needs.
LH1522AAC
Vishay Intertechnology's LH1522AAC is a solid state relay with separate, 2-element configuration. It features a control current of 0.001 A and max forward current of 0.05 A. Ideal for DC input applications requiring MOSFET output circuit type, with max isolation voltage of 5300 V and operating temperature range from -40 to 85 °C.
CPC1006N
The Littelfuse CPC1006N is a single solid state relay with a max forward current of 0.05A and on-state resistance of 10 ohm. It features a transistor output SSR optoelectronic type, operates b/w -40°C to 85°C, and offers an isolation voltage of 1500V. Ideal for applications requiring precise control in industrial automation systems.
DLD2450
Crydom's DLD2450 is a TRIGGER OUTPUT SSR with 3.5V control voltage and 50A max on-state current. With 4000V isolation voltage, it operates b/w -30°C to 80°C making it ideal for DC input applications in various industries.
PVT322ASPBF
PVT322ASPBF by Infineon Technologies is a Solid State Relay with separate configuration, 2 elements. It has a max forward current of 0.025A and control current of 0.002A, making it suitable for low-power applications. With a max isolation voltage of 4000V and MOSFET output circuit type, it is ideal for DC input applications requiring high reliability in industrial settings.
DC100D20
The Crydom DC100D20 is a TRANSISTOR OUTPUT SSR with 20A max on-state current, 0.017 ohm max on-state resistance, and 2500V max isolation voltage. Ideal for applications requiring reliable solid state switching in temperatures ranging from -30°C to 80°C.
H12WD4850
Crydom's H12WD4850 SSR has a max on-state current of 50A, control voltage of 4V, and optoelectronic trigger output. Ideal for DC input applications requiring high isolation voltage up to 4000V, operating b/w -40°C to 80°C in compact spaces with its 24mm height and 57mm length.
AQY212GHAX
Panasonic
Panasonic AQY212GHAX is a SINGLE Solid State Relay with 1.1A Control Current and 0.01A Max Forward Current. Featuring MOSFET Output Circuit Type, it operates b/w -40 to 85 °C, making it ideal for AC/DC applications requiring high isolation voltage of 5000V in compact spaces due to its 2.9mm height and surface mounting feature.
LCA110LS
The Littelfuse LCA110LS is a SINGLE solid state relay with 0.002 A control current and 0.05 A max forward current. Featuring a TRANSISTOR OUTPUT SSR, it has a MOSFET output circuit type and operates b/w -40 to 85 °C. Ideal for DC input applications, it offers 3750 V isolation voltage and 35 ohm on-state resistance, making it suitable for various industrial automation tasks.
D2440D
Hbcontrols
TRIGGER OUTPUT SSR; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 4000 V; No. of Elements: 2;
D06D100
Crydom's D06D100 is a single solid state relay with max. on-state current of 100A and max. isolation voltage of 2500V. Ideal for applications requiring high current switching in temperatures ranging from -30°C to 80°C, featuring low on-state resistance at 0.005 ohm.
CMX60D20
TRANSISTOR OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Height: 25.4 mm; Input Type: DC; Control Voltage: 3 V;
SPFE240D25
TRIGGER OUTPUT SSR; No. of Elements: 1; Maximum Operating Temperature: 80 Cel; Additional Features: UL APPROVED; Maximum Isolation Voltage: 4000 V; Maximum On State Current: 10 A;
TLP3240(TP15,F)
Toshiba
Toshiba's TLP3240(TP15,F) is a MOSFET solid state relay with 1.15V control voltage, operating b/w 25-60°C. At just 1.8mm height and 2.04mm length, it's ideal for DC input applications requiring compact and efficient switching solutions in various electronic devices.
CWU4825P
CWU4825P by Crydom is a solid state relay with 0.01 A control current, 20 V control voltage, and 4000 V max isolation voltage. It features a trigger output SSR optoelectronic type and back to back SCR output circuit. Ideal for applications requiring reliable switching in temperatures ranging from -40°C to 80°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CPC1017NTR
IXYS Corporation
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 13 INCH; No. of Elements: 1; Maximum On State Resistance: 16 ohm;
CPC1017NTR by Littelfuse is a SINGLE solid state relay with a control current of 0.0004 A and max forward current of 0.05 A. Featuring MOSFET output circuit type, it operates b/w -40 to 85 °C and offers an isolation voltage of 1500 V. Ideal for DC input applications, this SSR has a compact size suitable for surface mounting in various electronic systems.
CPC1014NTR
CPC1014NTR by Littelfuse is a SINGLE solid state relay with 0.05A max forward current, 2 ohm max on-state resistance, and 1500V max isolation voltage. Ideal for optoelectronic applications requiring TRANSISTOR OUTPUT SSRs in temperatures ranging from -40 to 85°C.
TRANSISTOR OUTPUT SSR; Maximum On State Current: .4 A; Packing Method: TR, EMBOSSED, 13 INCH; Maximum Forward Current: .05 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
CPC1017N
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .1 A; JESD-609 Code: e3; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel;
CPC1017N by Littelfuse is a single solid state relay with a control current of 0.0004 A and max forward current of 0.05 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85°C and offers an isolation voltage of 1500 V. Ideal for DC input applications, this transistor output SSR has a max on-state resistance of 16 ohm and on-state current of 0.1 A, making it suitable for various surface mount uses.
CPC1018NTR
CPC1018NTR by Littelfuse is a SINGLE solid state relay with 0.0002 A control current and 0.05 A max forward current. Featuring a TRANSISTOR OUTPUT SSR, MOSFET output circuit type, and 1500 V isolation voltage, it operates b/w -40 to 85 °C. Ideal for DC input applications requiring a compact surface mount design.
Ixys Integrated Circuits Division
TRANSISTOR OUTPUT SSR; Terminal Finish: Pure Matte Tin (Sn); Maximum On State Resistance: .8 ohm; Maximum Isolation Voltage: 1500 V; Maximum On State Current: .6 A; Additional Features: HIGH RELIABILITY, UL RECOGNIZED;
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 1500 V; Configuration: SINGLE;
CPC1008NTR
CPC1008NTR by Littelfuse is a single configuration solid state relay with a control current of 0.00045 A and max forward current of 0.05 A. It is commonly used in applications requiring optoelectronic transistor output, such as DC input control voltage and surface mounting feature.
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Control Current: .002 A; Maximum On State Current: .15 A; Output Circuit Type: MOSFET; Maximum Forward Current: .05 A;
CPC1002NTR
CPC1002NTR by Littelfuse is a SINGLE MOSFET SSR with 0.00055 A control current, 0.05 A max forward current, and 0.7 A max on-state current. Ideal for DC input applications, it offers 1500 V isolation voltage, operates b/w -40 to 85 °C, and has a compact size of 4.1mm length and 2.18mm height.
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Length: 4.1 mm; Maximum Isolation Voltage: 1500 V; Maximum Forward Current: .05 A; Maximum On State Current: .7 A;
CPC1709J
The Littelfuse CPC1709J is a single solid state relay with a max forward current of 0.1A and MOSFET output circuit type. It operates b/w -40°C to 85°C, has a max isolation voltage of 2500V, and can handle up to 9A on-state current. Ideal for DC input applications requiring low on-state resistance and high isolation levels.
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Output Circuit Type: MOSFET; Maximum Isolation Voltage: 2500 V; Maximum On State Resistance: .05 ohm; Configuration: SINGLE;
CPC1018N
CPC1018N by Littelfuse is a single solid state relay with a control current of 0.0002 A and max forward current of 0.05 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85°C and offers an isolation voltage of 1500 V. Ideal for DC input applications, this SSR has a compact height of 2.03 mm and length of 4.089 mm, suitable for surface mount installations in various electronic systems.
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum On State Resistance: .8 ohm; JESD-609 Code: e3; Maximum On State Current: .6 A; Maximum Operating Temperature: 85 Cel;
TRANSISTOR OUTPUT SSR; Terminal Finish: Pure Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 1500 V; Maximum On State Current: .6 A;
CPC1019NTR
CPC1019NTR by Littelfuse is a SINGLE MOSFET SSR with 0.05A forward current and 0.6 ohm on-state resistance. Ideal for DC input applications, it offers 1500V isolation voltage, operates b/w -40 to 85°C, and has a compact surface mount design at 4.089mm length and 2.03mm height.
TRANSISTOR OUTPUT SSR; Maximum Forward Current: .05 A; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Maximum On State Resistance: .6 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved