Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CPC1014NTR by Littelfuse is a SINGLE solid state relay with 0.05A max forward current, 2 ohm max on-state resistance, and 1500V max isolation voltage. Ideal for optoelectronic applications requiring TRANSISTOR OUTPUT SSRs in temperatures ranging from -40 to 85°C.
Median Price
$1.527
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.300
100+ parts
$1.060
1k+ parts
$0.879
10k+ parts
$0.774
Farnell
$1.151
-
Element14
$2.240
$1.750
Newark
$2.450
$1.950
$1.770
Mouser Electronics
$3.030
$2.400
$2.000
$1.930
DigiKey
$2.408
$2.144
Arrow
$0.803
Future Electronics
$1.490
Verical
$1.254
$1.205
Nova Conductors
$1.186
Component Electronics Inc.
$1.540
$1.150
$1.000
Bristol Electronics
$1.800
Ozdisan Elektronik
$46.656
Vyrian
NAC Semi
$3.000
IBS Electronics
$1.045
ComSIT Distribution GmbH
Semtec, LLC
Chip Stock
ACDS - Activité Composants Distribution Service
Diverse Electronics
Lantek
Mil-Aero Solutions, Inc.
Inventory MP
Prism Electronics
NexGen Digital
Advanced Electronics
$0.256
$0.233
$0.210
Aztec Data Supply Inc.
$0.638
Ampacity Inc.
$0.650
Semicontronic
$0.634
$0.630
Corohmni
$0.930
Argo Parts USA
Continental Prestige Electronics
$1.162
Bastille Electronics
$1.127
$1.070
$1.056
CoreStaff
$2.468
$0.972
$0.925
Perfect Parts
Kepictronics
RC Electronics
$0.950
$0.870
$0.840
Futuretech Components
Glotronic Ltd.
GreenTree Electronics
Benley Electronics
Authorized Procurement Solutions
Technoshack Inc. (Excess)
iodParts Technologies Inc.
$0.854
Robosynatics
$0.409
Lucentia Tech
Modulus Dynamics
Single configuration makes it easy to use and install in various applications.
Low forward current consumption helps in saving energy and reducing heat generation.
Transistor output SSR provides high switching speed and low power consumption.
High operating temperature range ensures reliability in harsh environments.
Low minimum operating temperature allows for use in extreme cold conditions.
Embossed packing in 13-inch tape reel ensures easy handling and storage.
Low on-state resistance results in efficient power transfer and less voltage drop.
High isolation voltage provides safety and protection for sensitive components.
High on-state current capability allows for switching of higher loads.
Solid State Relays CPC1014NTR attributes and parameters. Explore more Solid State Relays devices from Littelfuse
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
No. of Elements:
Maximum On State Current:
Maximum On State Resistance:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Lite-on Semiconductor
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
International Devices
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
1N4148W-T
Rectron
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
FDLL4148
Fairchild Semiconductor
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LH1522AB
Infineon Technologies
TRANSISTOR OUTPUT SSR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On State Current: .2 A; Configuration: SEPARATE, 2 ELEMENTS; Maximum On State Resistance: 15 ohm; Minimum Operating Temperature: -40 Cel;
CPC1002NTR
IXYS Corporation
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Length: 4.1 mm; Maximum Isolation Voltage: 1500 V; Maximum Forward Current: .05 A; Maximum On State Current: .7 A;
ASO241-R
Sensata Technologies
ASO241-R by Sensata Technologies is a SINGLE configuration TRIGGER OUTPUT SSR with SCR output circuit. It has a max forward current of 0.015 A and can handle up to 1.5 A on-state current. Ideal for DC input applications, it offers 2500 V isolation voltage and operates b/w -30°C to 80°C temperatures.
3-1393030-1
TE Connectivity
TE Connectivity 3-1393030-1 is a Solid State Relay with TRIGGER OUTPUT SSR type. It operates b/w -30 to 80 °C and supports supply voltage range of 4-32 V. With max output voltage of 660 V, it is ideal for CHASSIS MOUNT applications.
DRTU06D06
TRANSISTOR OUTPUT SSR;
DRA4-MCXE240D5
Crydom
Crydom's DRA4-MCXE240D5 is a 4-element TRANSISTOR OUTPUT SSR with max. isolation voltage of 4000V and max. on state current of 5A. Operating temp ranges from -40°C to 80°C, making it ideal for industrial automation, HVAC systems, and power distribution applications.
CWD2425P
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 4000 V; Height: 33 mm;
LCA110LSTR
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum On State Current: .12 A; Output Circuit Type: MOSFET; Packing Method: TR; Maximum Isolation Voltage: 3750 V;
AQY210S
Aromat
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); Height: 2.1 mm; Length: 4.4 mm; Control Voltage: 1.14 V; Output Circuit Type: MOSFET;
PF240D25
Hbcontrols
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); No. of Elements: 1; Maximum Operating Temperature: 80 Cel; Maximum On State Current: 25 A; Minimum Operating Temperature: -30 Cel;
DMO063
TRANSISTOR OUTPUT SSR; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Input Type: DC; Maximum On State Current: 3 A; Output Circuit Type: MOSFET; Maximum Operating Temperature: 80 Cel;
AQY282SZ
Solid State Relays; Control Current: .0018 A; Minimum Operating Temperature: -40 Cel; Input Type: DC; Length: 4.3 mm; Output Circuit Type: MOSFET;
Siemens
TRANSISTOR OUTPUT SSR; Maximum Forward Current: .05 A; Additional Features: UL RECOGNIZED; Maximum On State Current: .2 A; Maximum On State Resistance: 15 ohm; Minimum Operating Temperature: -40 Cel;
AQW212AX
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); Height: 3.9 mm; Input Type: DC; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
G3VM-61ER1
Omron
The Omron G3VM-61ER1 is a solid state relay with a max forward current of 0.025 A and a max on-state current of 3 A. It has a MOSFET output circuit type and can operate at temperatures ranging from -20 to 65 °C. This relay is commonly used in applications requiring DC input and surface mounting feature.
AQY212G2S
Panasonic
Panasonic AQY212G2S is a SINGLE Solid State Relay with 0.03 A Control Current and 1.25 A Max On State Current. Featuring MOSFET Output Circuit, it operates b/w -40 to 85 °C, making it ideal for AC/DC applications in various industries.
SSRT-240A25
TE Connectivity's SSRT-240A25 is a COMPLEX solid state relay with max. forward current of 0.0085 A and max. on-state current of 25 A. Ideal for chassis mounting, it offers trigger output SSR optoelectronic type, 280 V max. output voltage, and 4000 V max. isolation voltage for applications requiring reliable switching in temperatures ranging from -30°C to 80°C.
PVG612S-TPBF
International Rectifier
TRANSISTOR OUTPUT SSR; Maximum Forward Current: .025 A; Minimum Operating Temperature: -40 Cel; Height: 3.42 mm; Output Circuit Type: MOSFET; Maximum Isolation Voltage: 4000 V;
TLP3556A(TP1,F(O
Toshiba
SSC1000-25-24
Crydom's SSC1000-25-24 is a TRANSISTOR OUTPUT SSR with a max on-state current of 25A. It operates in temperatures ranging from -30°C to 80°C and offers an isolation voltage of 2500V. This solid state relay is commonly used in various applications requiring high current switching capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CPC1017NTR
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 13 INCH; No. of Elements: 1; Maximum On State Resistance: 16 ohm;
Littelfuse
CPC1017NTR by Littelfuse is a SINGLE solid state relay with a control current of 0.0004 A and max forward current of 0.05 A. Featuring MOSFET output circuit type, it operates b/w -40 to 85 °C and offers an isolation voltage of 1500 V. Ideal for DC input applications, this SSR has a compact size suitable for surface mounting in various electronic systems.
CPC1014NTR
TRANSISTOR OUTPUT SSR; Maximum On State Current: .4 A; Packing Method: TR, EMBOSSED, 13 INCH; Maximum Forward Current: .05 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
CPC1017N
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .1 A; JESD-609 Code: e3; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel;
CPC1017N by Littelfuse is a single solid state relay with a control current of 0.0004 A and max forward current of 0.05 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85°C and offers an isolation voltage of 1500 V. Ideal for DC input applications, this transistor output SSR has a max on-state resistance of 16 ohm and on-state current of 0.1 A, making it suitable for various surface mount uses.
CPC1018NTR
CPC1018NTR by Littelfuse is a SINGLE solid state relay with 0.0002 A control current and 0.05 A max forward current. Featuring a TRANSISTOR OUTPUT SSR, MOSFET output circuit type, and 1500 V isolation voltage, it operates b/w -40 to 85 °C. Ideal for DC input applications requiring a compact surface mount design.
Ixys Integrated Circuits Division
TRANSISTOR OUTPUT SSR; Terminal Finish: Pure Matte Tin (Sn); Maximum On State Resistance: .8 ohm; Maximum Isolation Voltage: 1500 V; Maximum On State Current: .6 A; Additional Features: HIGH RELIABILITY, UL RECOGNIZED;
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 1500 V; Configuration: SINGLE;
CPC1008NTR
CPC1008NTR by Littelfuse is a single configuration solid state relay with a control current of 0.00045 A and max forward current of 0.05 A. It is commonly used in applications requiring optoelectronic transistor output, such as DC input control voltage and surface mounting feature.
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Control Current: .002 A; Maximum On State Current: .15 A; Output Circuit Type: MOSFET; Maximum Forward Current: .05 A;
CPC1002NTR by Littelfuse is a SINGLE MOSFET SSR with 0.00055 A control current, 0.05 A max forward current, and 0.7 A max on-state current. Ideal for DC input applications, it offers 1500 V isolation voltage, operates b/w -40 to 85 °C, and has a compact size of 4.1mm length and 2.18mm height.
CPC1709J
The Littelfuse CPC1709J is a single solid state relay with a max forward current of 0.1A and MOSFET output circuit type. It operates b/w -40°C to 85°C, has a max isolation voltage of 2500V, and can handle up to 9A on-state current. Ideal for DC input applications requiring low on-state resistance and high isolation levels.
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Output Circuit Type: MOSFET; Maximum Isolation Voltage: 2500 V; Maximum On State Resistance: .05 ohm; Configuration: SINGLE;
CPC1018N
CPC1018N by Littelfuse is a single solid state relay with a control current of 0.0002 A and max forward current of 0.05 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85°C and offers an isolation voltage of 1500 V. Ideal for DC input applications, this SSR has a compact height of 2.03 mm and length of 4.089 mm, suitable for surface mount installations in various electronic systems.
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum On State Resistance: .8 ohm; JESD-609 Code: e3; Maximum On State Current: .6 A; Maximum Operating Temperature: 85 Cel;
TRANSISTOR OUTPUT SSR; Terminal Finish: Pure Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 1500 V; Maximum On State Current: .6 A;
CPC1019NTR
CPC1019NTR by Littelfuse is a SINGLE MOSFET SSR with 0.05A forward current and 0.6 ohm on-state resistance. Ideal for DC input applications, it offers 1500V isolation voltage, operates b/w -40 to 85°C, and has a compact surface mount design at 4.089mm length and 2.03mm height.
TRANSISTOR OUTPUT SSR; Maximum Forward Current: .05 A; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Maximum On State Resistance: .6 ohm;
CPC1016N
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .05 A; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Control Current: .002 A; No. of Elements: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved