Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .018 ohm; Rated Power Dissipation (P): 3 W; Maximum Operating Temperature: 125 Cel; Thermistor Application: OVERCURRENT PROTECTION;
Median Price
$0.920
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.541
1k+ parts
$0.413
10k+ parts
$0.355
DigiKey
Native Components
$373.440
$365.971
$362.237
$358.502
Northwest PG Solutions
$410.784
-
Authorized Procurement Solutions
Non-linear Resistors AHRL350 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Additional Features:
Maximum Circuit DC Voltage:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Reference Standard:
Resistance:
Resistor Type:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
AHRL350 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Tak Cheong Electronics Holdings
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
TRF250-145
TE Connectivity's TRF250-145 is a PTC resettable fuse with 60V operating voltage and 1W power dissipation. Ideal for temperature sensing applications, it features radial terminal placement in a disk package measuring 6.5mm x 4.6mm x 11mm. With CSA, TUV, and UL certifications, it operates b/w -40°C to 85°C.
RUEF400
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 30 V;
RUEF300
TE Connectivity's RUEF300 is a PTC resettable fuse with resistance of 0.08 ohm and rated power dissipation of 2W. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape. Operating temperatures range from -40 to 85°C.
MICROSMD050F-2
TE Connectivity's MICROSMD050F-2 is a PTC resettable fuse with 2 terminals, rated for 13.2V AC voltage and 0.8W power dissipation. It is used for temperature sensing applications, featuring dual-ended terminal placement in a rectangular package suitable for surface mounting at up to 85°C operating temperature.
NTCALUG02A103G
Vishay Intertechnology's NTCALUG02A103G is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and disk package shape. It has a thermal sensitivity index of 3984 K and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, it features tin terminal finish and chassis mount packaging.
MICROSMD010F-2
TE Connectivity's MICROSMD010F-2 is a PTC resettable fuse with 30V URac. Its dual-ended terminals and rectangular package make it suitable for temperature sensing applications. With a max operating temperature of 85°C, it is designed for surface mounting.
RXEF050-AP
TE Connectivity's RXEF050-AP is a PTC resettable fuse with resistance of 0.5 ohm and rated power dissipation of 0.77W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C, with radial terminal placement in disk package shape.
RXEF090
TE Connectivity's RXEF090 is a PTC resettable fuse with resistance of 0.47 ohm and rated power dissipation of 0.99 W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating b/w -40 to 85 °C, it has a rated AC voltage of 72 V.
RXEF110K-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: AMMO PACK; Thermistor Application: TEMPERATURE SENSING; Shape (Package): DISK PACKAGE;
RXEF090-AP
TE Connectivity's RXEF090-AP is a PTC resettable fuse with resistance of 0.2 ohm and rated power dissipation of 0.99 W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and disk package shape, it is designed for through hole mounting.
B72660M0271K072
TDK
B72660M0271K072 by TDK is a METAL OXIDE FILM VARISTOR with 21J energy capacity, 275V RMS voltage, and 350V operating voltage. It is a non-linear resistor in DO-214var package for surge protection applications. With DUAL terminals and J BEND shape, it operates b/w -40 to 85°C for surface mounting.
B57237-S509-M
TDK B57237-S509-M NTC Thermistor with 5 ohm resistance, 265 V URac, and 3.1 W rated power dissipation. Ideal for soft start applications due to its thermal sensitivity index of 2900 K and -55 to 170 °C operating temperature range.
RXEF020S
TE Connectivity's RXEF020S is a PTC resettable fuse resistor with a rated AC voltage of 72V. It is used for temperature sensing applications and has a max operating temperature of 85°C. Its terminal placement is radial, and it comes in a disk package shape.
MICROSMD150F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 2.8 mm; Shape (Package): RECTANGULAR PACKAGE;
CL-60
Amphenol
The Amphenol CL-60 is a NTC thermistor with 10 ohm resistance and 25% tolerance. It is designed for overload protection applications, featuring radial terminal placement and disk package shape. With a thermal sensitivity index of 888 K, it operates b/w -50 to 175 °C effectively.
VCAS06AG183R0YAT3A
KYOCERA AVX
KYOCERA AVX's VCAS06AG183R0YAT3A is a VARISTOR with 18V operating voltage, 14V max RMS voltage, and -55 to 125 °C temp range. Ideal for AEC-Q200 compliant automotive applications due to its SMT package style and dual-ended terminal placement.
SIOV-S20K275
Infineon Technologies
SIOV-S20K275 by Infineon is a METAL OXIDE FILM VARISTOR with 151J energy capacity. It operates at 350V DC/275V RMS, suitable for THROUGH HOLE MOUNT applications. This non-linear resistor in radial package style with Tin/Lead finish is ideal for surge protection in various electronic circuits.
192-102DEW-A01
Honeywell Sensing And Control
192-102DEW-A01 by Honeywell is a NTC thermistor with 1000 ohm resistance, ideal for temperature sensing applications. Featuring a disk package shape and wire terminals, it operates b/w 0 to 70°C with a thermal sensitivity index of 3260 K. Suitable for through hole mounting in various electronic devices.
V10E25P
V10E25P by Littelfuse is a VARISTOR with METAL OXIDE FILM tech, 13J energy capacity, and 25V RMS voltage. Ideal for surge protection in electronics due to its radial package style, -40 to 85°C operating temp range, and UL/CUL/TUV certifications.
NTCLE100E3472HB0A
Vishay Intertechnology's NTCLE100E3472HB0A is a 4700 ohm NTC thermistor with a thermal sensitivity index of 3977 K. It has a rated temperature range from -40 to 125 °C and is ideal for temperature sensing applications. The thermistor features radial terminal placement, matte tin finish, and through hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AHRL1300-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0033 ohm; Rated Power Dissipation (P): 6.4 W; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial;
AHRL1100-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0038 ohm; Rated Power Dissipation (P): 5.7 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2;
AHRL1500-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0029 ohm; Rated Power Dissipation (P): 7 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2;
AHRL1400
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0031 ohm; Rated Power Dissipation (P): 6.7 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 16 V;
AHRL1200-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0035 ohm; Rated Power Dissipation (P): 6 W; Maximum Operating Temperature: 125 Cel; Width (Package): 3.6 mm;
AHRL350-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .018 ohm; Rated Power Dissipation (P): 3 W; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial;
AHRL1000-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0042 ohm; Rated Power Dissipation (P): 5.4 W; Maximum Operating Temperature: 125 Cel; Width (Package): 3.6 mm;
AHRL1300-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0033 ohm; Rated Power Dissipation (P): 6.4 W; Maximum Operating Temperature: 125 Cel; Height (Package): 24.8 mm;
AHRL1100-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0038 ohm; Rated Power Dissipation (P): 5.7 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WIRE;
AHRL1500
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0029 ohm; Rated Power Dissipation (P): 7 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 16 V;
AHRL1400-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0031 ohm; Rated Power Dissipation (P): 6.7 W; Maximum Operating Temperature: 125 Cel; Reference Standard: AEC-Q200; UL;
AHRL1200-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0035 ohm; Rated Power Dissipation (P): 6 W; Maximum Operating Temperature: 125 Cel; Height (Package): 23.4 mm;
AHRL1500-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0029 ohm; Rated Power Dissipation (P): 7 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WIRE;
AHRL1100
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0038 ohm; Rated Power Dissipation (P): 5.7 W; Maximum Operating Temperature: 125 Cel; Length (Package): 17.4 mm;
AHRL1300
AHRL1000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0042 ohm; Rated Power Dissipation (P): 5.4 W; Maximum Operating Temperature: 125 Cel; Operating Voltage: 16 V;
AHRL1000-AP
AHRL1200
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0035 ohm; Rated Power Dissipation (P): 6 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 16 V;
AHRL1400-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .0031 ohm; Rated Power Dissipation (P): 6.7 W; Maximum Operating Temperature: 125 Cel; Length (Package): 17.4 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved