Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 150 A; Terminal Shape: END CAP; Body Length/Diameter: 162.1 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
$0.530
Northwest PG Solutions
$0.583
AZTECH Wire
$15.390
Fuses 8NLE2150E attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Trip Time/Delay:
Built-in Features:
Terminal Shape:
Mounting Feature:
8NLE2150E Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Grande Electronics
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Sangdest Microelectronics (Nanjing)
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Digitron Semiconductors
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0273.500H
Littelfuse
Littelfuse 0273.500H is a MICRO fuse with 0.5A rated current, 125V AC/DC voltage, and very fast blow characteristic. It has a trip delay of 14400s and nominal joule integral of 0.0716J. Ideal for circuit protection in applications requiring high breaking capacity and through-hole mounting.
BK/ATC-5
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
FNQ-1/2
Eaton Corporation
FNQ-1/2 by Eaton Corp is a 500V, 0.5A time delay fuse with 10000A breaking capacity. Inline mounting feature and end cap terminal shape make it ideal for electric circuit protection in various applications. Compliant with CSA and UL standards, it comes in bulk packing with dimensions of 10.3mm x 38.1mm.
170M3744
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated DC Voltage: 1300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE;
0215016.MXEP
Littelfuse 0215016.MXEP fuse, rated at 16A and 250V, with a trip time of 0.01s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Measuring 5x20mm, it has a pre arcing rating of 1408 A2/s and meets IEC, PSE, and UL standards.
ATM-5LP
Eaton Corporation's ATM-5LP fuse, with 10.9mm x 3.81mm x 8.73mm dimensions, rated at 5A and 32V, features a fast blow characteristic for circuit protection. Ideal for applications requiring electric fuses in inline/holder mounting setups, it offers a rated breaking capacity of 1000A and operates b/w -40°C to 125°C temperatures.
BK/ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
0287003.PXCN
Littelfuse 0287003.PXCN fuse has a Nominal Joule Integral of 7.4 J, Trip Time of 0.08s, and Rated Current of 3A. It is used for circuit protection in applications requiring a rated DC voltage of 32V, with CSA and UL standards compliance.
LPJ-100SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Body Height: 8.81 mm;
0AKK-K175-BB
Bel Fuse
Bel Fuse's 0AKK-K175-BB is a fast blow electric fuse with 6250J nominal joule integral and 175A rated current. With a rated DC voltage of 1000V, it operates b/w -40°C to 125°C, making it ideal for circuit protection in various applications requiring high breaking capacity and inline mounting.
FRS-R-60
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
Eaton Corporation's ATM-15 fuse, with 15A rated current and 32V rated voltage, is a fast blow electric fuse suitable for circuit protection. Measuring 10.92mm x 3.81mm x 8.81mm, it has a silver terminal finish and UL reference standard compliance. Ideal for inline mounting applications, it offers a max operating temperature of 100°C and a rated breaking capacity of 1000A.
LP-CC-2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
ATM-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
FNQ-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
0AKK-K250-BA
Bel Fuse 0AKK-K250-BA is a fast blow electric fuse with 9600J nominal joule integral, rated for 250A current and 1000V DC voltage. It has a compact body size of 74x45x25mm suitable for inline mounting applications in circuits requiring high breaking capacity up to 50000A.
FRN-R-8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 8 A; Terminal Shape: END CAP;
3413.0002.22
Schurter Ag
Schurter Ag's 3413.0002.22 fuse is a 3.2x1.6mm electric fuse with 0.05A rated current and 125V AC voltage, suitable for circuit protection in various applications. It has a very fast blow characteristic, surface mounting feature, and meets CUL and UL standards for reliable performance in temperatures ranging from -55 to 90°C.
LPJ-50SP
Eaton Corporation's LPJ-50SP fuse, rated at 50A and 600V AC/DC, features a J class with time delay blow characteristic. With a compact size of 27mm x 60.3mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
8NLE-20EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 50 A; Terminal Shape: END CAP; Manufacturer Series: 8NLE-20E;
8NLE-10EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 30 A; Terminal Shape: END CAP; Dimensions: 76.2mm x 454mm;
8NLE2-125EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 250 A; Terminal Shape: END CAP; Manufacturer Series: 8NLE2-125E;
8NLE2100E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 100 A; Terminal Shape: END CAP; Trip Time/Delay: 300 Seconds;
8NLE-15ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 15 A; Terminal Shape: END CAP; Body Height: 453.89 mm;
8NLE2-150EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 300 A; Terminal Shape: END CAP; Body Length/Diameter: 162 mm;
8NLE-100EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 150 A; Terminal Shape: END CAP; Dimensions: 76.2mm x 454mm;
8NLE-20ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 20 A; Terminal Shape: END CAP; Rated Breaking Capacity: 80000 A;
8NLE-10ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Breaking Capacity: 80000 A;
8NLE2125E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 125 A; Terminal Shape: END CAP; Body Height: 454.03 mm;
8NLE2-100EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 200 A; Terminal Shape: END CAP; Body Height: 454 mm;
8NLE-15EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 40 A; Terminal Shape: END CAP; Rated Breaking Capacity: 80000 A;
8NLE2-125ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 125 A; Terminal Shape: END CAP; Blow Characteristic: MEDIUM;
8NLE10E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 10 A; Terminal Shape: END CAP; Body Height: 454.03 mm;
8NLE20E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 20 A; Terminal Shape: END CAP; Body Length/Diameter: 76.2 mm;
8NLE100E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 100 A; Terminal Shape: END CAP; Built-in Features: STRIKER;
8NLE-100ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 100 A; Terminal Shape: END CAP; Body Length/Diameter: 76.2 mm;
8NLE15E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 15 A; Terminal Shape: END CAP; Body Height: 454.03 mm;
8NLE2-100ES
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved