Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 15 A; Terminal Shape: END CAP; Body Height: 453.89 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$1.987
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$2.186
Fuses 8NLE-15ES attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Terminal Shape:
Mounting Feature:
8NLE-15ES Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Hitano Enterprise
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
Diotec Semiconductor Ag
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1554216004
Molex
WIRE AND CABLE;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LPJ-70SP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
0AKK-K175-BB
Bel Fuse
Bel Fuse's 0AKK-K175-BB is a fast blow electric fuse with 6250J nominal joule integral and 175A rated current. With a rated DC voltage of 1000V, it operates b/w -40°C to 125°C, making it ideal for circuit protection in various applications requiring high breaking capacity and inline mounting.
028707.5PXCN
Littelfuse
028707.5PXCN by Littelfuse is a 7.5A electric fuse with a trip time of 0.08s and a rated breaking capacity of 1000A. It is commonly used for circuit protection in applications such as inline holders, with a temperature range of -40 to 125°C.
LP-CC-2-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
25ET
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated DC Voltage: 350 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE;
CM32F
Eaton Corporation
ELECTRIC FUSE;
031302.5HXP
Littelfuse 031302.5HXP fuse, rated 2.5A at 250V, offers a time lag blow characteristic with a trip delay of 14400s. With a nominal joule integral of 130J, it provides supplemental circuit protection in applications requiring a max operating temperature of 125°C and pre-arcing rating of 130 A2/s.
LPJ-400SP
Eaton LPJ-400SP fuse, rated 400A at 600V AC/DC, features J class with time delay blow characteristic. Suitable for electric circuit protection in various applications. Compact size of 53.6mm x 38.3mm with TAB/BLADE terminals and high breaking capacity of 300kA.
ATDR3-2/10
Mersen S A
ATDR3-2/10 by Mersen S A is a 3.2A time delay fuse with 600V AC and 300V DC ratings. It has a rated breaking capacity of 200kA, suitable for electric fuse circuit protection in various applications. The fuse features an end cap terminal shape and inline/holder mounting, meeting CSA and UL standards.
80ET
80ET fuse by Eaton Corporation is a 80A electric fuse with a rated AC voltage of 690V and rated breaking capacity of 200kA. With dimensions of 48mm x 19.1mm, it is suitable for inline mounting applications in compliance with standards BS88 and CE.
FNQ-10
The Eaton Corporation FNQ-10 fuse, rated at 10A and 500V, features a time delay blow characteristic. With a compact MIDGET size and CC class, it offers circuit protection with a high breaking capacity of 10000A. Ideal for inline mounting in various applications certified by CE, CSA, and UL standards.
ANL-300
ANL-300 by Eaton Corp is a 300A time delay electric fuse with 2700A breaking capacity. Measuring 81mm x 22.2mm, it features END CAP terminals and an inline mounting feature. Ideal for circuit protection in applications requiring up to 80V DC voltage, compliant with CSA and UL standards.
0481.500H
Littelfuse 0481.500H fuse with 0.5A rated current, 125V AC/DC voltage, and fast blow characteristic. Ideal for circuit protection in applications requiring a compact size (17.8mm x 8mm x 19.6mm) and high breaking capacity of 40A. Compliant with CSA and UL standards, suitable for use in alarm systems or indicators due to built-in features.
BK/ATM-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: TAB/BLADE; Blow Characteristic: FAST;
SP/LPJ-400SP
Eaton Corporation's SP/LPJ-400SP fuse, rated 400A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 53.6mm x 38.3mm and TAB/BLADE terminals, it offers circuit protection for high breaking capacity applications in various industries. Compliant with CE, CSA, and UL standards, it is suitable for inline mounting/holders.
ATM25
ATM25 fuse by Mersen S A is a 25A fast blow electric fuse with a rated voltage of 600V AC/DC. Measuring 10mm x 38mm, it has a midget size and end cap terminal shape, suitable for inline mounting applications. With a high breaking capacity of 100kA, it meets CSA and UL standards for reliable circuit protection in various industrial settings.
ANL-80
ANL-80 by Eaton Corporation is an 81mm x 22.2mm electric fuse with a rated current of 80A and a blow characteristic of time delay. It is commonly used for circuit protection in applications requiring a rated breaking capacity of 2700A and a rated DC voltage of 80V.
FNQ-R-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
3413.0002.11
Schurter Ag
Schurter Ag's 3413.0002.11 fuse is a 3.2x1.6mm electric fuse with 0.05A rated current and 125V AC voltage, suitable for circuit protection in various applications. With a very fast blow characteristic and high breaking capacity of 10A, it operates b/w -55°C to 90°C temperatures efficiently, meeting CUL and UL standards for reliable performance.
JJS-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
8NLE2150E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 150 A; Terminal Shape: END CAP; Body Length/Diameter: 162.1 mm;
8NLE-20EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 50 A; Terminal Shape: END CAP; Manufacturer Series: 8NLE-20E;
8NLE-10EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 30 A; Terminal Shape: END CAP; Dimensions: 76.2mm x 454mm;
8NLE2-125EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 250 A; Terminal Shape: END CAP; Manufacturer Series: 8NLE2-125E;
8NLE2100E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 100 A; Terminal Shape: END CAP; Trip Time/Delay: 300 Seconds;
8NLE2-150EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 300 A; Terminal Shape: END CAP; Body Length/Diameter: 162 mm;
8NLE-100EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 150 A; Terminal Shape: END CAP; Dimensions: 76.2mm x 454mm;
8NLE-20ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 20 A; Terminal Shape: END CAP; Rated Breaking Capacity: 80000 A;
8NLE-10ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Breaking Capacity: 80000 A;
8NLE2125E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 125 A; Terminal Shape: END CAP; Body Height: 454.03 mm;
8NLE2-100EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 200 A; Terminal Shape: END CAP; Body Height: 454 mm;
8NLE-15EL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 40 A; Terminal Shape: END CAP; Rated Breaking Capacity: 80000 A;
8NLE2-125ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 125 A; Terminal Shape: END CAP; Blow Characteristic: MEDIUM;
8NLE10E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 10 A; Terminal Shape: END CAP; Body Height: 454.03 mm;
8NLE20E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 20 A; Terminal Shape: END CAP; Body Length/Diameter: 76.2 mm;
8NLE100E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 100 A; Terminal Shape: END CAP; Built-in Features: STRIKER;
8NLE-100ES
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 100 A; Terminal Shape: END CAP; Body Length/Diameter: 76.2 mm;
8NLE15E
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 8250 V; Rated Current: 15 A; Terminal Shape: END CAP; Body Height: 454.03 mm;
8NLE2-100ES
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved