Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 6 A; Terminal Shape: END CAP; Fuse Size: 10x38mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.424
100+ parts
1k+ parts
10k+ parts
$0.407
Northwest PG Solutions
$0.466
$0.411
Fuses 593006S attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated AC Voltage:
Body Diameter:
Body Height:
Blow Characteristic:
Fuse Size/Group:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
593006S Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - EAC Mark 20/Feb/2018
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
M39029/58-360
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
Tak Cheong Electronics Holdings
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Shenzhen Socay Electronics
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
FNQ-R-1-4/10
Eaton Corporation
Eaton Corporation's FNQ-R-1-4/10 fuse, rated at 1.4A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is ideal for electric circuit protection in various applications with a high breaking capacity of 200kA.
0326015.MXP
Littelfuse
Littelfuse 0326015.MXP fuse, rated at 15A and 250V, offers a trip time of 5s with a pre-arcing rating of 245 A2/s. With dimensions of 6.35mm x 31.75mm, it is ideal for circuit protection in applications requiring a time delay blow characteristic and terminal shape end cap. Compliant with CE, CSA, KC, PSE, TUV, and UL standards.
ATQR1
Mersen S A
The Mersen S A ATQR1 fuse is rated for 600V AC with a 1A current and time delay blow characteristic. It has a body length of 10.4mm, diameter of 38.1mm, and end cap terminal shape. Suitable for inline mounting applications, it offers circuit protection with a high breaking capacity of 200kA at up to 80°C temperature.
PV-6A10-T
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1000 V; Rated Current: 6 A; Terminal Shape: TAB/BLADE; Fuse Size: 10x38mm;
BK-MDL-5-R
The Eaton BK-MDL-5-R fuse is a 5A, 250V electric fuse with time delay blow characteristic. With a rated breaking capacity of 200A and nominal joule integral of 32J, it's ideal for inline mounting in various applications requiring circuit protection. Compliant with CE, CSA, and UL standards, it comes in a compact size of 6.4x31.7mm for efficient use.
KRP-C-800SP
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 800 A; Terminal Shape: TAB/BLADE;
157.5701.6301
Littelfuse 157.5701.6301 fuse has a trip time of 0.2s, rated current of 300A, and rated voltage of 48V. It is used for circuit protection in applications requiring a compact size and high breaking capacity.
BK/ATM-10
The Eaton Corporation BK/ATM-10 fuse is a 10A electric fuse with fast blow characteristic. It has dimensions of 10.92mm x 3.81mm x 8.81mm and rated voltage of 32V, suitable for inline mounting applications. With a rated breaking capacity of 1000A, it is UL standard compliant and ideal for circuit protection in various electronic devices.
0297015.WXNV
Littelfuse 0297015.WXNV is a MINI fuse with 15A rated current, 308J nominal joule integral, and 0.03s trip time. Ideal for circuit protection in automotive applications due to its compact size (10.9mm x 3.8mm x 8.8mm) and high breaking capacity of 1000A at rated voltage of 32V.
0259001.T
Littelfuse 0259001.T PICO fuse with 1A rated current, 125V AC/DC voltage, and fast blow characteristic. Ideal for circuit protection in electronics with -55 to 125°C operating temperature range. Measuring 13mm length and 8mm height, it has a rated breaking capacity of 50A.
KTK-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 3 A; Terminal Shape: END CAP;
BK/ATM-3
The Eaton Corporation BK/ATM-3 fuse is a 32V, 3A fast blow electric fuse with a rated breaking capacity of 1000A. Measuring 10.92mm x 3.81mm x 8.81mm, it features TAB/BLADE terminals and UL reference standard for inline mounting applications in circuits requiring reliable overcurrent protection up to 100°C.
KTK-R-1-1/2
Eaton Corporation's KTK-R-1-1/2 fuse, rated at 1.5A and 600V, features fast blow characteristic with a body size of 10.3mm x 38.1mm. It is a CC class electric fuse with nickel terminal finish, suitable for inline mounting applications with a high breaking capacity of 200000A.
SP/LPJ-100SP
Eaton Corporation's SP/LPJ-100SP fuse is a 100A, time delay electric fuse with 600V AC and 300V DC ratings. It features TAB/BLADE terminals, silver finish, and dimensions of 28.6mm x 66.7mm. Ideal for inline mounting applications requiring high breaking capacity up to 300kA, compliant with CE, CSA, and UL standards.
LP-CC-10
LP-CC-10 by Eaton Corp is a 10A time delay electric fuse with 600V AC & 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Commonly used in inline/holder setups for circuit protection in various applications.
SP/LPJ-400SP
Eaton Corporation's SP/LPJ-400SP fuse, rated 400A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 53.6mm x 38.3mm and TAB/BLADE terminals, it offers circuit protection for high breaking capacity applications in various industries. Compliant with CE, CSA, and UL standards, it is suitable for inline mounting/holders.
FWP-10A14FI
The Eaton Corporation FWP-10A14FI fuse offers 3.6J nominal joule integral, 700V AC/DC rated voltage, and 10A current rating. Ideal for circuit protection in various applications with its built-in indicator feature and high breaking capacity of 200kA. Compliant with CE, IEC, and UL standards for reliable performance.
31.7601
Schurter Ag
ELECTRIC FUSE;
LP-CC-1-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
LP-CC-1-8/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.8 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
593010
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP;
593006
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 6 A; Terminal Shape: END CAP;
593003
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP;
593009
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 9 A; Terminal Shape: END CAP;
593007
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 7 A; Terminal Shape: END CAP;
593005
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP;
593010S
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Body Length/Diameter: 10 mm;
593001S
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
593003S
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Reference Standard: MIL-PRF-15160;
593008S
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 8 A; Terminal Shape: END CAP; Terminal Finish: SILVER;
593007S
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 7 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
593004S
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: END CAP; Reference Standard: MIL-PRF-15160;
593009S
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 9 A; Terminal Shape: END CAP; Body Length/Diameter: 10 mm;
593002S
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Fuse Size: 10x38mm;
593005S
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Fuse Size: 10x38mm;
593001
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP;
593002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP;
593004
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: END CAP;
593008
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 8 A; Terminal Shape: END CAP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved