Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse 0218.063MXP fuse, rated at 0.063A and 250V, features a time lag blow characteristic with a trip delay of 0.01s. With dimensions of 5x20mm, it is commonly used for circuit protection in applications requiring a max operating temperature of 125°C.
Median Price
$1.989
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.895
100+ parts
$0.797
1k+ parts
$0.677
10k+ parts
$0.622
Farnell
$1.760
$1.250
-
Chip1Stop
$3.280
$1.880
$1.320
DigiKey
$3.290
$1.928
$1.470
$1.438
Mouser Electronics
$3.590
$2.110
$1.810
Newark
$3.680
$2.230
$1.890
$1.850
Verical
$1.441
Arrow
$1.464
$1.432
Element14
$1.394
$1.260
TME
$0.840
$0.537
$0.443
Nova Conductors
$1.350
Mobius Materials
$2.790
$2.220
NAC Semi
$0.204
IBS Electronics
$1.391
$1.362
Vyrian
VNN
ACDS - Activité Composants Distribution Service
Lantek
Ampacity Inc.
$0.133
Semicontronic
$0.130
$0.129
CoreStaff
$1.199
$0.503
$0.455
Argo Parts USA
Corohmni
$12.918
Kepictronics
Glotronic Ltd.
Netroflash
$1.323
$1.283
$1.256
Authorized Procurement Solutions
GreenTree Electronics
Continental Prestige Electronics
Higher joule integral value indicates better energy absorption capability, making this fuse a reliable choice for protecting electronic devices from power surges.
Suitable for use in standard voltage electrical circuits, ensuring compatibility with most household and commercial applications.
Fast trip time/delay ensures quick response to overloads or faults, helping prevent damage to connected equipment.
Bulk packaging provides cost-effective solution for purchasing multiple fuses, ideal for industrial or manufacturing settings.
Low rated current makes it suitable for sensitive electronic components, offering precise protection against overcurrent situations.
Wide operating temperature range allows for use in extreme cold environments, ensuring continuous protection in various conditions.
Inline or holder mounting options provide flexibility in installation, making it easier to integrate this fuse into different types of circuit setups.
Fuses 0218.063MXP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0218.063MXP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Bytesonic Electronics
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
0678L9300-02
Bel Fuse
Bel Fuse 0678L9300-02 is a 30A electric fuse with 1000J nominal joule integral and 250V AC voltage rating. It has a trip time of 60s, suitable for circuit protection in applications requiring medium blow characteristic. Dimensions are 9.8mm x 3.05mm x 3.05mm, with surface mounting feature and CUL; UL reference standard compliance.
TR/3216FF2-R
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 63 V; Rated Current: 2 A; Terminal Shape: END CAP;
FWP-600A
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 600 A; Terminal Shape: TAB/BLADE;
ATM-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; JESD-609 Code: e3;
0BLS001.T
Littelfuse
Littelfuse 0BLS001.T fuse rated at 1A, 600V AC with fast blow characteristic. Ideal for electric circuit protection with 10x35mm size and CSA/UL standards compliance.
FNQ-R-15
Eaton Corporation
FNQ-R-15 by Eaton Corporation is a 15A time delay fuse with a rated AC voltage of 600V. It has a compact body size of 10.3mm x 38.1mm and is suitable for circuit protection in applications such as inline/holder mounting in electrical systems.
BK/ATC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE;
ATDR4-1/2
Mersen S A
Mersen S A's ATDR4-1/2 fuse, rated 4.5A and 600V AC, features time delay blow characteristic. With a 200kA breaking capacity, it is ideal for electric circuit protection in various applications requiring inline mounting or holder setup. Compliant with CSA and UL standards, its compact size of 10.4mm x 38.1mm makes it versatile for different electrical systems.
J-41
Fuses;
0468001.NRHF
Littelfuse 0468001.NRHF fuse, rated at 1A and 63V, features a trip time of 0.0015s. With dimensions of 3.18mm x 1.52mm x 0.58mm, it is ideal for circuit protection in applications requiring a time delay blow characteristic. Compliant with CSA, CUL, and UL standards, it offers a max operating temperature of 90°C and matte tin terminal finish for surface mount installation.
3404.2418.11
Schurter Ag
3404.2418.11 fuse by Schurter Ag is a TIME LAG type with 1.6A current rating and 250V AC voltage, suitable for ELECTRIC FUSE circuit protection applications. It has a rated breaking capacity of 200A, dimensions of 4.2x11.1mm, and operates b/w -40 to 85°C temperatures, meeting CUL, UL, VDE standards.
LP-CC-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
LPJ-60SP
Eaton Corporation LPJ-60SP fuse, rated 60A at 600V AC/300V DC with J class and time delay blow characteristic. Inline/holder mounting for circuit protection in CE/CSA/UL compliant applications. Dimensions: 27mm x 60.3mm, terminal shape: end cap, breaking capacity: 300kA.
0297005.L
0297005.L by Littelfuse is a MINI fuse with 5A rated current, 32V DC voltage, and 37J nominal joule integral. It has a trip time of 0.03s and dimensions of 10.9mm x 3.8mm x 8.8mm. Ideal for circuit protection in automotive applications due to its high breaking capacity and pre-arcing rating of 25 A2/s.
KRP-C-800SP
Eaton Corporation's KRP-C-800SP fuse, rated at 800A and 600V AC/DC, features a time delay blow characteristic. With dimensions of 61mm x 95.3mm and a L-class fuse type, it is suitable for inline mounting applications requiring electric circuit protection. This silver terminal finish fuse has a high breaking capacity of 300kA and complies with CE, CSA, and UL standards.
473.5
Littelfuse 473.5 fuse rated for 125V AC/DC, with body dimensions of 3.17mm diameter and 7.11mm height. Ideal for circuit protection in applications requiring through hole mounting, operating b/w -55°C to 125°C temperature range.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Manufacturer Series: ATC;
JJS-50
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 50 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
KLB4
KLB4 by Littelfuse is a 4A fast blow electric fuse with 250V AC/DC rated voltage, ideal for inline mounting. With dimensions of 14.3mm x 50.8mm and high breaking capacity of 200kA, it meets CSA and UL standards for reliable circuit protection in various applications.
55900000001
Littelfuse 55900000001 TR5 fuse rated for 250V AC/DC, with 10mm body length and pin wire terminal shape. Ideal for circuit protection in applications requiring electric fuses, UL and VDE standards compliant. Operating temperature range -40 to 85°C, through-hole mounting in bulk packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5ST63-R
0218002.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
0218016.HXP
Littelfuse 0218016.HXP fuse has 1955J Joule Integral, rated 250V AC voltage, and 16A current. With time lag blow characteristic, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
021801.6HXP
Littelfuse 021801.6HXP fuse, rated at 1.6A and 250V, with a blow characteristic of time lag. Ideal for circuit protection in applications requiring a supplemental fuse class with dimensions of 5x20mm. Operating temperature range from -55 to 125°C ensures reliable performance in various environments.
0218001.MXP
Littelfuse 0218001.MXP fuse has a rated current of 1A and trip time of 0.02s, suitable for circuit protection in applications with 250V AC voltage. With a blow characteristic of TIME LAG, it offers a pre arcing rating of 6.73 A2/s and is compatible with various reference standards like CCC, CE, CSA, UL.
0218016.MXP
0218016.MXP by Littelfuse is a 5x20mm electric fuse with a rated current of 16A and a trip time of 0.02s. It has a max operating temperature of 125°C and is commonly used for circuit protection in various applications.
021801.6MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.6 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
0218002.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
0218.315MXP
0218.315MXP by Littelfuse is a time lag electric fuse with a rated current of 0.315 A and a max operating temperature of 125°C. It has a blow characteristic of 0.02 seconds and is commonly used for circuit protection in applications such as inline/holder mounting.
02183.15MXP
Littelfuse 02183.15MXP fuse, rated at 3.15A and 250V, with a trip time of 0.02s, is ideal for circuit protection in applications requiring a time lag blow characteristic. It has a nominal joule integral of 38.15J and is designed for use in inline/holder mounting configurations. Compliant with standards such as CCC, CE, CSA, UL, VDE, it ensures reliable performance in various electronic devices.
0218.160MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .16 A; Terminal Shape: END CAP; Trip Time/Delay: .02 Seconds;
0218010.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BULK;
021802.5MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
0218.500HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: END CAP; Body Length/Diameter: 5.2 mm;
0218.050MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; Terminal Finish: TIN;
0218.630MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Trip Time/Delay: .02 Seconds;
021806.3MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 6.3 A; Terminal Shape: END CAP; Fuse Class: Supplemental;
0218.315HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
02183.15HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Pre Arcing Rating (A2/s): 38.15;
0218005.MXP
Littelfuse 0218005.MXP fuse, rated 5A and 250V, with 0.02s trip time. Ideal for circuit protection in applications requiring a time lag blow characteristic. Features 111J nominal joule integral and compact 5x20mm size for inline mounting.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved