Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Manufacturer Series: 2016L; No. of Terminals: 2;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$6.310
100+ parts
1k+ parts
10k+ parts
Kepictronics
Northwest PG Solutions
$6.184
Non-linear Resistors 2016L100 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Resistor Type:
Terminal Finish:
Thermistor Application:
2016L100 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Micropac Industries
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1552200253
Molex
WIRE AND CABLE;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
Surge Components
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Rfe International
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
RF1180-000
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Height (Package): 1.94 mm;
MINISMDC014F-2
TE Connectivity
TE Connectivity's MINISMDC014F-2 is a PTC resettable fuse with 2 terminals, rated for 60V AC. Its dual-ended terminal placement and rectangular package make it ideal for temperature sensing applications. With a max operating temperature of 85°C, it is designed for surface mounting in various electronic devices.
RUEF250
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .07 ohm; Rated Power Dissipation (P): 1.2 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
B57237-S330-M
TDK
TDK B57237-S330-M is a NTC thermistor with 33 ohm resistance, rated for 265V AC. It has thermal sensitivity index of 3300 K and operates b/w -55 to 170 °C. Ideal for soft start applications, this radial thermistor comes in disk package with through hole mounting.
B57861S0103A039
B57861S0103A039 by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3988 K thermal sensitivity index. Ideal for temperature sensing applications with a rated temperature range of -55 to 155 °C. Features radial terminal placement in disk package for through hole mounting.
RXEF250-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; No. of Terminals: 2; Minimum Operating Temperature: -40 Cel;
NANOSMDC016F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; JESD-609 Code: e3;
TFPT1206L1002FM
Vishay Dale
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
0603L010YR
0603L010YR by Littelfuse is a PTC resettable fuse with resistance of 0.9 ohm, operating voltage of 15V, and dual-ended terminals. Ideal for overcurrent protection in various applications. SMT package style with matte tin finish, suitable for surface mounting type.
RUEF135-2
The Littelfuse RUEF135-2 is a PTC resettable fuse with a resistance of 0.13 ohm and rated AC voltage of 30V. It is used for temperature sensing applications, with a max operating temperature of 85°C and min operating temperature of -40°C. Its terminal placement is radial and it has a rectangular package shape.
SIOV-S14K275
Infineon Technologies
Infineon's SIOV-S14K275 varistor has a max energy capacity of 71J, operating at 350V with a max RMS voltage of 275V. Its metal oxide film tech and radial package make it ideal for through-hole mounting in surge protection applications.
NTCS0805E3472FMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
RUEF400-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE;
V33ZA1P
V33ZA1P by Littelfuse is a varistor with 20V max circuit RMS voltage and 1.2J energy capacity. It operates b/w -55°C to 125°C, suitable for surge protection in electronic circuits. With radial terminal placement and metal oxide film technology, it offers reliable performance in through-hole mounting applications.
B72214S2301K101
B72214S2301K101 by TDK is a VARISTOR with 300V max RMS voltage and 385V operating voltage. With METAL OXIDE FILM technology, it offers high energy absorption up to 125J. Ideal for surge protection in applications requiring non-linear resistors like power supplies and industrial equipment.
V18AUMLA1206NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Package Style (Meter): SMT;
B72220-S301-K101
The TDK B72220-S301-K101 is a VARISTOR with 300V URac and 385V operating voltage. It has a max energy absorption of 173J, suitable for surge protection in circuits. With radial terminal placement and metal oxide film technology, it is ideal for through-hole mounting applications.
MF-R010-2
Bourns
The Bourns MF-R010-2 is a PTC resettable fuse with 2.5 ohm resistance and 60V operating voltage. It has radial terminal placement, wire-shaped terminals, and operates b/w -40 to 85°C. Ideal for overcurrent protection in various electronic applications due to its compact disk package design.
MF-USHT110KX-2
MF-USHT110KX-2 by Bourns is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 9V, and max temp of 125°C. It's used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style. Compliant with AEC-Q200, CUL, TUV standards.
MINISMDC075F/24-2
TE Connectivity's MINISMDC075F/24-2 is a PTC resettable fuse with operating voltage of 24V. It features dual-ended terminals, rectangular SMT package, and temperature sensing application. With -40 to 85°C operating range, matte tin finish, and CSA/TUV/UL standards, it is ideal for surface mount installations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2016L075/60MR
2016L075/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.13 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it ensures reliable performance in a compact form factor.
2016L030DR
2016L030DR by Littelfuse is a PTC resettable fuse with resistance of 0.5 ohm, operating voltage of 60V, and dual-ended terminals. It is used for overcurrent protection in surface mount applications. Dimensions are 5.44mm x 4.43mm x 1.25mm with a max operating temperature of 85°C and min of -40°C.
2016L050MR
2016L050MR by Littelfuse is a PTC resettable fuse with a resistance of 0.2 ohm and an operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminal placement and a rectangular package shape.
2016L050MR-A
PTC RESETTABLE FUSE;
2016L150/33DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .07 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Operating Voltage: 33 V;
2016L100/33DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .1 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Operating Voltage: 33 V;
2016L260/24MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .025 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: CUL; TUV; UL; Operating Voltage: 24 V;
2016L100PR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .1 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; Reference Standard: CUL; TUV; UL;
2016L075/60
PTC RESETTABLE FUSE; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
2016L100PRHF
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERLOAD PROTECTION; JESD-609 Code: e3; Terminal Placement: DUAL ENDED;
2016L150
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; No. of Terminals: 2; Terminal Finish: Matte Tin (Sn); Manufacturer Series: 2016L; JESD-609 Code: e3;
2016L050
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; No. of Terminals: 2; Thermistor Application: OVERLOAD PROTECTION; Manufacturer Series: 2016L; JESD-609 Code: e3;
2016L075/60MR-A
2016L100/33DRHF
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Shape (Package): RECTANGULAR PACKAGE; Terminal Shape: WRAPAROUND;
2016L050MRHF
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Terminal Shape: WRAPAROUND; No. of Terminals: 2;
2016L100PR-A
2016L030DRHF
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; JESD-609 Code: e3; Packing Method: TR;
2016L100/33
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: 0.25 OHMS AT 20 DEG CEL; Terminal Placement: DUAL ENDED; JESD-609 Code: e3;
2016L030
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Thermistor Application: OVERLOAD PROTECTION; No. of Terminals: 2; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved