Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse 045202.5NRL is a NANO-sized fuse with 2.5A rated current and 125V AC/DC voltage. It offers slow blow characteristic, 15J nominal joule integral, and trip time of 0.002s. Ideal for circuit protection in applications requiring surface mount fuses with gold terminal finish.
Median Price
$1.620
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Arrow
1+ parts
$0.733
100+ parts
-
1k+ parts
10k+ parts
$0.531
Mouser Electronics
$2.900
$1.760
$1.350
$1.210
DigiKey
$3.260
$1.910
$1.470
Verical
$0.850
Chip1Stop
$0.771
Newark
$2.380
Farnell
$1.260
$1.000
$0.917
Element14
$1.980
$1.690
VNN
Nova Conductors
A2Z Electronics, Inc.
LWI Electronics Inc
Ampacity Inc.
$0.540
Argo Parts USA
Perfect Parts
Continental Prestige Electronics
$0.959
$0.868
$0.801
Aranea Global
With a high nominal joule integral of 15 J, this fuse can effectively absorb high levels of energy, providing excellent protection for your electrical circuit.
The rated AC voltage of 125 V ensures compatibility with standard electrical systems, making this fuse a versatile option for various applications.
With a fast trip time/delay of 0.002 seconds, this fuse can quickly disconnect the circuit in case of a fault, minimizing damage and ensuring safety.
The compact body size of this fuse makes it suitable for space-restricted installations, offering convenience and flexibility in mounting.
The rated current of 2.5 A allows this fuse to handle moderate electrical loads, making it a reliable choice for various electronic devices.
With a high maximum operating temperature of 125°C, this fuse can withstand elevated temperatures, ensuring performance in diverse environments.
The slow blow characteristic of this fuse offers gradual response to overloads, providing additional protection against temporary surges in current.
The surface mount design of this fuse simplifies installation on circuit boards or other surfaces, enhancing ease of use and compatibility with modern electronics.
Fuses 045202.5NRL attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
045202.5NRL Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
442
Uchihashi Estec
THERMAL FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 3.5 A; Terminal Shape: WIRE;
0251004.HAT1L
Littelfuse
Littelfuse 0251004.HAT1L PICO fuse, rated 125V, 4A with very fast blow characteristic. Ideal for circuit protection in electronics due to its small size (2.8mm x 7.11mm) and high breaking capacity of 50A. Operating temperature range -55°C to 125°C makes it versatile for various applications.
BK/MDL-5-R
Cooper Electronic Technologies
BK/MDL-5-R by Cooper Electronic Technologies is a 5A time delay electric fuse with a rated AC voltage of 250V. It has a nominal joule integral of 32J and a rated breaking capacity of 200A. This fuse is commonly used for circuit protection in applications requiring inline mounting or holder installation.
ATQR15
Mersen S A
The Mersen S A ATQR15 fuse is a 15A electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. Featuring time delay blow characteristic, it has dimensions of 10.4mm x 38.1mm and terminal shape END CAP. Ideal for circuit protection in applications requiring inline/holder mounting at temperatures up to 80°C.
FNQ-1/2
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
FWP-10A14FI
Eaton Corporation
The Eaton Corporation FWP-10A14FI fuse offers 3.6J nominal joule integral, 700V AC/DC rated voltage, and 10A current rating. Ideal for circuit protection in various applications with its built-in indicator feature and high breaking capacity of 200kA. Compliant with CE, IEC, and UL standards for reliable performance.
0ATO001.V
0ATO001.V fuse by Littelfuse has a 0.4J nominal joule integral, 0.1s trip time, and 1A rated current. It is used for circuit protection in applications requiring a 32V DC voltage rating.
045401.5MR
Littelfuse 045401.5MR Nano Fuse has a rated current of 1.5A and slow blow characteristic, with dimensions of 6.1mm x 2.69mm x 2.69mm. It is used for electric circuit protection at max operating temperature of 125°C, suitable for surface mount applications in various industries.
ATM30
Mersen S A's ATM30 fuse, rated 30A and 600V, features fast blow characteristic with 100kA breaking capacity. It is a midget size fuse with end cap terminal shape, suitable for electric circuit protection in inline/holder mounting applications.
BK-MDL-5-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Body Height: 31.75 mm;
JJS-50
Eaton Corporation's JJS-50 fuse, rated at 50A and 600V AC, features a very fast blow characteristic with a breaking capacity of 200kA. With dimensions of 20.6mm x 39.7mm and end cap terminals, it is commonly used for electric circuit protection in various applications compliant with CE, CSA, and UL standards.
LPJ-175SPI
Eaton Corporation LPJ-175SPI fuse, rated 175A and 600V, features time delay blow characteristic. With dimensions of 41.4mm x 76.2mm, it is suitable for circuit protection in applications requiring a rated breaking capacity of 300kA. This J-class fuse with TAB/BLADE terminals is ideal for inline mounting in electrical systems.
ATM-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
0485001.DR
Littelfuse 0485001.DR is a NANO fuse with rated current of 1A and rated voltage of 250V, suitable for circuit protection in various applications. It has a fast blow characteristic, trip time of 60s, and nominal joule integral of 0.3044J. This surface mount fuse operates b/w -55°C to 125°C with a max breaking capacity of 100A.
JTD1.25ID
Littelfuse JTD1.25ID fuse, rated 1.25A with time delay blow characteristic, suitable for electric circuit protection at 600V AC and 300V DC. Features indicator and high breaking capacity of 200kA. Commonly used in inline/holder mounting applications.
473.5
Littelfuse 473.5 fuse rated for 125V AC/DC, with body dimensions of 3.17mm diameter and 7.11mm height. Ideal for circuit protection in applications requiring through hole mounting, operating b/w -55°C to 125°C temperature range.
LPJ-50SP
Eaton Corporation's LPJ-50SP fuse, rated at 50A and 600V AC/DC, features a J class with time delay blow characteristic. With a compact size of 27mm x 60.3mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
FWP-40A14F
Eaton Corporation's FWP-40A14F fuse offers 84J nominal joule integral, 700V AC/DC rated voltage, and 40A current. Ideal for electric circuit protection in various applications with a breaking capacity of 200kA. Measuring at 14.3mm x 50.8mm, it features end cap terminals and complies with IEC and UL standards for reliable performance.
04000026NR
Littelfuse 04000026NR fuse, with a rated current of 1.5A and fast blow characteristic, is ideal for electric circuit protection. It has a nominal joule integral of 0.03J and trip time of 5s, suitable for surface mount applications in electronics with a max operating temperature of 150°C.
AJT125EI
Mersen S A's AJT125EI fuse, rated 125A and 600V AC/500V DC, features time delay blow characteristic. With 200kA breaking capacity, it is an electric fuse with TAB/BLADE terminals for inline mounting. UL certified, it suits applications requiring high current circuit protection in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0452005MRL
0452005MRL by Littelfuse is a NANO fuse with 125V voltage rating and 5A current. With time lag blow characteristic, it offers circuit protection in various applications. Featuring trip delay of 14400s, it is ideal for use in electronics requiring reliable overcurrent protection.
0452005.MRL
Littelfuse 0452005.MRL is a NANO fuse with 5A rated current and 125V AC/DC voltage. With slow blow characteristic, it offers circuit protection with 53.72J nominal joule integral. Ideal for applications requiring surface mount fuses like electronics and industrial equipment.
0452002.MRL
Littelfuse 0452002.MRL NANO fuse with 125V AC/DC, 2A rated current and slow blow characteristic. Ideal for circuit protection in electronics, featuring WRAPAROUND terminals and CSA/CUL/UL standards compliance. Dimensions: 6.1mm x 2.69mm x 2.69mm, operating temp -55 to 125 °C.
0452001.MRL
Littelfuse 0452001.MRL fuse, rated at 125V, offers a slow blow characteristic with a trip time of 0.002s. With dimensions of 6.1mm x 2.69mm x 2.69mm and a nominal joule integral of 1.98J, it is ideal for circuit protection in applications requiring a nano-sized surface mount electric fuse with WRAPAROUND terminals.
0452003.MRL
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
0452.500MRL
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
045201.5MRL
Littelfuse 045201.5MRL Nano Fuse with 1.5A current, 125V AC/DC voltage rating, and slow blow characteristic. Ideal for circuit protection in electronics with surface mounting feature and gold terminal finish.
0452004.MRL
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
045202.5MRL
Littelfuse 045202.5MRL is a NANO fuse with 2.5A rated current and 125V rated voltage, suitable for circuit protection in electronics. It has a slow blow characteristic, trip time of 0.002s, and can handle up to 15J of energy. Ideal for surface mount applications with CSA, CUL, UL certifications.
0452.500NRL
0452.500NRL by Littelfuse is a NANO-sized electric fuse with 0.5A rated current and 125V DC/AC voltage. It has a slow blow characteristic, 0.24J nominal joule integral, and trip time of 0.002s. Ideal for circuit protection in applications requiring surface mount fuses with gold terminal finish.
0452012.MRL
Littelfuse 0452012.MRL Nano fuse with 260.46J joule integral, 72V AC voltage rating, and 0.002s trip time. Ideal for circuit protection in electronics with 12A rated current, slow blow characteristic, and CSA/CUL/UL standards compliance.
0452.750MRL
Littelfuse 0452.750MRL is a NANO size fuse with 0.75A rated current and 125V rated voltage. It has a slow blow characteristic, 0.904J nominal joule integral, and trip time of 0.002s. Ideal for circuit protection in applications requiring surface mount fuses with WRAPAROUND terminals.
0452007.MRL
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 72 V; Rated DC Voltage: 75 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND;
0452.375MRL
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .375 A; Terminal Shape: WRAPAROUND;
0452002.NRL
Littelfuse 0452002.NRL Nano Fuse offers 8.2J Nominal Joule Integral, 125V AC Rated Voltage, and 0.002s Trip Time. Ideal for circuit protection in electronics with a slow blow characteristic, rated at 2A current and 50A breaking capacity.
0452005.NRL
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
0452005NRL
ELECTRIC FUSE; Rated Current: 5 A; JESD-609 Code: e4; Reference Standard: CSA; UL; Minimum Operating Temperature: -55 Cel; Fuse Size: NANO;
0452002.NRSN
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
0452001.NRSN
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved