Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP;
Median Price
$14.260
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$7.170
100+ parts
$4.280
1k+ parts
$4.020
10k+ parts
-
Standard Electric Supply Co.
$21.350
Native Components
$19.034
Northwest PG Solutions
$20.938
$18.844
Fuses 0326003.VXP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
0326003.VXP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Philips Components
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Continental Device India
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Comset Semiconductors
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SP/LPJ-200SP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE;
170M3744
Eaton Corporation
The Eaton Corporation 170M3744 fuse offers 5150J nominal joule integral and 1300V rated AC/DC voltage for circuit protection. With a rated current of 200A and breaking capacity of 100kA, it is ideal for inline mounting in various applications requiring high-level electrical protection.
FWS-10A20F
Eaton Corporation's FWS-10A20F fuse offers 118J nominal joule integral, 1400V AC voltage rating, and 50000A breaking capacity. Ideal for circuit protection in applications requiring a 10A rated current, such as inline or holder mounting setups. Compliant with CE and IEC standards for reliable performance.
FNQ-R-1-1/8
Eaton Corporation's FNQ-R-1-1/8 fuse, rated at 1.125A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, this CC-class fuse has a high breaking capacity of 200000A.
0473003.MRT1L
Littelfuse
Littelfuse 0473003.MRT1L PICO fuse with 3A current, 125V AC/DC voltage rating, and 21J joule integral. Ideal for circuit protection in applications requiring time delay blow characteristic and rated breaking capacity of 50A. Dimensions of 3.43mm x 7.11mm make it suitable for through-hole mounting in various electronic devices.
JKS-40
Eaton Corporation's JKS-40 fuse, rated at 600V and 40A with a fast blow characteristic, is ideal for electric circuit protection. With a compact body size of 27mm x 60.3mm and high breaking capacity of 200kA, it is suitable for inline mounting applications. This J-class fuse conforms to CE, CSA, and UL standards for reliable performance in various electrical systems.
SR-5-1A-AP
Eaton Corporation's SR-5-1A-AP fuse has a rated current of 1A and nominal joule integral of 7.5J, suitable for circuit protection with a blow characteristic of time delay. With a max operating temperature of 125°C and rated AC voltage of 250V, it is ideal for applications requiring reliable electrical fuse protection in various industries.
FNQ-R-2-8/10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.8 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
JJS-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
ATM-15
Eaton Corporation's ATM-15 fuse, with 15A rated current and 32V rated voltage, is a fast blow electric fuse suitable for circuit protection. Measuring 10.92mm x 3.81mm x 8.81mm, it has a silver terminal finish and UL reference standard compliance. Ideal for inline mounting applications, it offers a max operating temperature of 100°C and a rated breaking capacity of 1000A.
AJT125EI
Mersen S A
Mersen S A's AJT125EI fuse, rated 125A and 600V AC/500V DC, features time delay blow characteristic. With 200kA breaking capacity, it is an electric fuse with TAB/BLADE terminals for inline mounting. UL certified, it suits applications requiring high current circuit protection in various industries.
AGC-20-R
Eaton Corporation's AGC-20-R fuse, rated at 20A and 32V, offers fast blow characteristic with a pre-arcing rating of 1.438 A2/s. With dimensions of 6.3x32mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
FNQ-R-3/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .75 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
LP-CC-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.125 A; Terminal Shape: END CAP;
ATQR1
The Mersen S A ATQR1 fuse is rated for 600V AC with a 1A current and time delay blow characteristic. It has a body length of 10.4mm, diameter of 38.1mm, and end cap terminal shape. Suitable for inline mounting applications, it offers circuit protection with a high breaking capacity of 200kA at up to 80°C temperature.
04661.25NR
Littelfuse 04661.25NR fuse has a rated current of 1.25A and very fast blow characteristic, suitable for electric circuit protection at -55°C to 90°C. With a rated DC voltage of 63V and nominal joule integral of 0.064J, it is ideal for surface mount applications in various industries.
0251015.MXL
Littelfuse 0251015.MXL is a PICO fuse with 15A rated current, 32V DC voltage, and very fast blow characteristic. Ideal for electric circuit protection in applications requiring a supplemental fuse class with dimensions of 2.8mm x 7.11mm.
36913150000
Littelfuse 36913150000 fuse has a Nominal Joule Integral of 78.388 J, Rated AC Voltage of 300 V, and Trip Time/Delay of 20 sec. It is used for circuit protection with a rated current of 3.15 A, blow characteristic as TIME LAG, and max operating temperature at 85°C.
KTK-R-25
Eaton Corporation's KTK-R-25 fuse, rated at 25A and 600V AC, features fast blow characteristic with a breaking capacity of 200kA. It is a CC class fuse with nickel terminal finish, suitable for electric circuit protection in various applications. Dimensions are 10.3mm x 38.1mm, designed for inline mounting in holders per CE, CSA, and UL standards.
CC12H2A-TR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Body Width: 1.6 inch;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GSA3-R
Bel Fuse
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 3 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
032601.5HXP
Littelfuse 032601.5HXP fuse, rated 1.5A and 250V, with time lag blow characteristic. Nominal Joule Integral of 40.1J for circuit protection in applications requiring a delay of up to 14400s at -55°C to 125°C operating temperature range. Mountable using INLINE/HOLDER method, complies with CE, CSA, PSE, UL standards.
0326015.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 15 A; Terminal Shape: END CAP;
0326002.MXP
0326002.MXP fuse by Littelfuse is a 2A, 250V electric fuse with time delay blow characteristic. With a rated breaking capacity of 100A, it offers circuit protection in various applications such as inline mounting and has reference standards including CE, CSA, PSE, and UL certifications.
0326.800MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: .8 A; Terminal Shape: END CAP;
0326.800HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .8 A; Terminal Shape: END CAP;
032601.5MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
0326015.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 15 A; Terminal Shape: END CAP;
0326003.MXP
Littelfuse 0326003.MXP fuse, rated 3A and 250V, offers time delay blow characteristic with trip time of 5s. With a nominal joule integral of 200J, it provides circuit protection in applications requiring a rated breaking capacity of 100A. Ideal for inline mounting in various industries due to its compact dimensions (6.35mm x 31.75mm).
0326005.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 5 A; Terminal Shape: END CAP;
0326.010MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .01 A; Terminal Shape: END CAP; Reference Standard: CE;
0326010.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 10 A; Terminal Shape: END CAP;
0326010.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP;
0326.010HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .01 A; Terminal Shape: END CAP;
0326020.HXP
Littelfuse 0326020.HXP fuse, rated at 20A and 250V, offers a time lag blow characteristic with a trip delay of 14400s. With a nominal joule integral of 575J, it provides circuit protection in applications requiring an electric fuse with CE, CSA, KC, PSE, and UL certifications.
0326004.MXP
0326004.MXP by Littelfuse is a time delay fuse with a rated current of 4A and a max operating temperature of 125°C. It is commonly used for circuit protection in applications such as inline/holder mounting, with reference standards including CE, CSA, PSE, and UL.
032602.5MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
0326020.MXDP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 20 A; Terminal Shape: END CAP;
0326025.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 25 A; Terminal Shape: END CAP;
0326004.MXCCP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: END CAP;
0326004.MXDP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: END CAP; Nominal Joule Integral: 9.71 J;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved