Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse 0287030.H fuse has a rated current of 30A and trip time of 0.08s. With dimensions of 19.1mm x 5.1mm x 12.3mm, it is used for circuit protection in applications requiring a max operating temperature of 125°C and rated DC voltage of 32V.
Median Price
$0.412
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.278
1k+ parts
$0.215
10k+ parts
$0.191
Mouser Electronics
$0.580
$0.341
$0.240
$0.221
DigiKey
$0.600
$0.350
$0.268
Verical
-
Chip1Stop
$0.178
$0.171
Nova Conductors
$0.194
Vyrian
VNN
Component Stockers USA
$0.150
$0.280
$0.230
Continental Prestige Electronics
$0.190
Argo Parts USA
$0.188
Authorized Procurement Solutions
Netroflash
$0.184
$0.180
This high Joule rating ensures effective protection against power surges and spikes, making this fuse a reliable choice for safeguarding electronic equipment.
The quick trip time ensures rapid response to overcurrent situations, preventing damage to the circuit and connected devices.
The compact body size makes this fuse suitable for installations where space is limited, ensuring convenient application in various settings.
The standard width allows for compatibility with commonly used fuse holders and equipment, simplifying replacement and installation processes.
The tab/blade terminals provide secure connections, reducing the risk of loose connections or arcing, thereby enhancing the overall safety of the electrical system.
The high-rated current capacity allows for effective protection of circuits handling heavy loads, making this fuse suitable for industrial and commercial applications.
The high operating temperature range ensures reliable performance even in harsh environmental conditions, increasing the durability and longevity of the fuse.
The low operating temperature range enables the fuse to function effectively in cold environments, making it suitable for a wide range of applications.
The rated DC voltage ensures compatibility with various DC systems, allowing for versatile use in automotive, marine, and other DC applications.
Fuses 0287030.H attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
0287030.H Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
KTK-1
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 1 A; Terminal Shape: END CAP;
0314002.MXP
Littelfuse
0314002.MXP fuse by Littelfuse is a 3AB size with 2A current rating and fast blow characteristic. It has a rated AC voltage of 250V, nominal joule integral of 5.7J, and max operating temperature of 125°C. Ideal for circuit protection in applications requiring a compact fuse with high breaking capacity.
FNQ-R-1/4
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
ATQR20
Mersen S A
Mersen S A's ATQR20 fuse, rated 20A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 10.4mm x 38.1mm and end cap terminal shape, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting applications in various industries like automotive and electronics.
FRS-R-100
Eaton Corporation
Eaton Corporation's FRS-R-100 fuse, rated at 100A and 600V AC/DC, features a time delay blow characteristic. With a compact body size of 34mm x 200mm, it is suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this RK5 class fuse has a high breaking capacity of 200kA.
BK/ATM-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE; Blow Characteristic: FAST;
The Eaton Corporation's KTK-1 fuse is a 10.3mm x 38.1mm fast-blow electric fuse with a rated voltage of 600V and current of 1A. It has a terminal shape of END CAP, rated breaking capacity of 100kA, and meets CSA and UL standards. Ideal for circuit protection in various applications requiring reliable overcurrent protection.
ATM-5LP
Eaton Corporation's ATM-5LP fuse, with 10.9mm x 3.81mm x 8.73mm dimensions, rated at 5A and 32V, features a fast blow characteristic for circuit protection. Ideal for applications requiring electric fuses in inline/holder mounting setups, it offers a rated breaking capacity of 1000A and operates b/w -40°C to 125°C temperatures.
0458007.DR
0458007.DR by Littelfuse is a NANO fuse with 7A rated current, 63V DC voltage, and 20.48J nominal joule integral. It is used for circuit protection in applications requiring a trip time of 5s, such as automotive electronics and industrial equipment.
AGC-20-R
Eaton Corporation's AGC-20-R fuse, rated at 20A and 32V, offers fast blow characteristic with a pre-arcing rating of 1.438 A2/s. With dimensions of 6.3x32mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
FWP-600A
Eaton Corporation's FWP-600A fuse offers 66700 J nominal joule integral, 600 A rated current, and 50000 A rated breaking capacity. Ideal for circuit protection in applications requiring a 700 V AC/DC voltage rating. Dimensions: 63.5mm x 72.14mm with TAB/BLADE terminals and CE/CSA/UL certifications.
0451.160MRL
0451.160MRL by Littelfuse is a NANO fuse with 0.16A rated current and 125V DC voltage, suitable for electric circuit protection. It has a very fast blow characteristic and a rated breaking capacity of 50A, making it ideal for surface mount applications in various industries. With dimensions of 6.1mm x 2.69mm x 2.69mm, this fuse operates b/w -55°C to 125°C temperatures according to CSA and UL standards.
ANL-80
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 80 V; Rated Current: 80 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
37001600430
Littelfuse 37001600430 fuse, rated at 0.16A and 250V, with fast blow characteristic. Ideal for circuit protection in various applications due to its compact TR5 size and high breaking capacity of 35A. Operating temperature range from -40°C to 85°C makes it suitable for diverse environments.
ATDR12
The Mersen S A ATDR12 fuse is a 12A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a high breaking capacity of 200kA.
0219002.MXAEP
Littelfuse 0219002.MXAEP fuse, rated at 2A and 250V, offers a time lag blow characteristic with a trip delay of 0.02s. With a nominal joule integral of 92.705J, it is ideal for circuit protection in applications requiring an electric fuse with dimensions of 5x20mm and terminal shape PIN WIRE.
LP-CC-4
LP-CC-4 by Eaton Corp is a 4A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10mm in body length, it features an end cap terminal shape and inline mounting for circuit protection applications. Compliant with CE, CSA, and UL standards, it offers a high breaking capacity of 200kA.
LP-CC-30
Eaton Corporation's LP-CC-30 fuse, rated at 30A and 600V AC/300V DC, features time delay blow characteristic. With a compact body size of 10x38.1mm, it is ideal for inline mounting applications requiring electric circuit protection with a high breaking capacity of 200kA.
0678L9300-02
Bel Fuse
Bel Fuse 0678L9300-02 is a 30A electric fuse with 1000J nominal joule integral and 250V AC voltage rating. It has a trip time of 60s, suitable for circuit protection in applications requiring medium blow characteristic. Dimensions are 9.8mm x 3.05mm x 3.05mm, with surface mounting feature and CUL; UL reference standard compliance.
SS-5-4A-AP
Eaton Corporation's SS-5-4A-AP fuse has a rated current of 4A and nominal joule integral of 87J. With a blow characteristic of time delay, it is suitable for circuit protection at 250V AC voltage. The fuse, with dimensions 8.5mm x 4.3mm x 8.35mm, features a max operating temperature of 125°C and mounting via through hole terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0287001.PXCN
Littelfuse 0287001.PXCN fuse has a Nominal Joule Integral of 0.4 J and Trip Time of 0.02 sec. With dimensions 19.1mm x 5.1mm x 12.3mm, it's rated for 1A current and has a breaking capacity of 1000A. Ideal for circuit protection in applications requiring a rated DC voltage of up to 32V with operating temperatures from -40°C to 125°C.
0287010.PXCN
Littelfuse 0287010.PXCN fuse has a rated current of 10A, trip time of 0.08s, and nominal joule integral of 115J. It is used for circuit protection in applications requiring a max operating temperature of 125°C and rated DC voltage of 32V.
0287015.PXCN
0287015.PXCN fuse by Littelfuse has a rated current of 15A and trip time of 0.08s, making it ideal for circuit protection in various applications. With a nominal joule integral of 340J and rated breaking capacity of 1000A, this fuse offers reliable performance. Its compact dimensions (19.1mm x 5.1mm x 12.3mm) and temperature range (-40°C to 125°C) further enhance its versatility in electronic systems.
0287003.PXCN
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: TAB/BLADE; JESD-609 Code: e3;
0287005.PXCN
Littelfuse 0287005.PXCN fuse has a rated current of 5A and trip time of 0.08s, suitable for electric circuit protection. With a nominal joule integral of 26J, it offers high breaking capacity at 1000A. Its compact dimensions (19.1mm x 5.1mm x 12.3mm) make it ideal for inline mounting applications in various industries.
028707.5.PXCN
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 7.5 A; Terminal Shape: TAB/BLADE; Reference Standard: CUL; UL;
028707.5PXCN
028707.5PXCN by Littelfuse is a 7.5A electric fuse with a trip time of 0.08s and a rated breaking capacity of 1000A. It is commonly used for circuit protection in applications such as inline holders, with a temperature range of -40 to 125°C.
0287030.PXCN
0287030.PXCN by Littelfuse is a 30A electric fuse with a rated breaking capacity of 1000A. It has a trip time of 0.08s and can handle a max operating temperature of 125°C. This fuse is commonly used for circuit protection in various applications.
0287003.PXS
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 1000 A;
0287005.L
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Body Height: 18.8 mm;
0287002.PXCN
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
0287020.PXCN
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Trip Time/Delay: .08 Seconds;
0287003.H
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: TAB/BLADE; Reference Standard: CSA; UL;
0287003.L
Littelfuse 0287003.L fuse has a Nominal Joule Integral of 7.4 J, Trip Time of 0.08 sec, and Rated Current of 3 A. Ideal for circuit protection in applications requiring a rated DC voltage of 32 V, such as automotive electronics or industrial equipment.
0287003.U
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: TAB/BLADE; Body Width: 5.1 inch;
0287040.PXCN
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 3300 J;
0287015.L
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 1000 A;
0287020.PXS
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Reference Standard: CSA; UL;
0287030.L
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Dimensions: 19.1mm x 5.1mm x 12.3mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved