Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse 0216016.MXP fuse, rated 16A and 250V, with fast blow characteristic. Suitable for circuit protection in applications requiring a 5x20mm size fuse with terminal shape end cap. Has a nominal joule integral of 462.5J and operates b/w -55°C to 125°C.
Median Price
$1.205
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.773
100+ parts
$0.515
1k+ parts
$0.472
10k+ parts
-
Arrow
$1.611
$1.036
$0.879
DigiKey
$2.350
$1.375
$1.049
$0.992
Mouser Electronics
$1.380
$1.140
Newark
$2.410
$1.440
$1.110
Farnell
$0.787
$0.707
Element14
$1.068
$0.862
$0.847
Verical
$0.984
TTI
$1.150
$1.130
Nova Conductors
$0.684
TME
$1.330
$1.040
$0.710
NAC Semi
$0.228
$0.211
IBS Electronics
$1.507
$0.316
Chip Stock
VNN
Vyrian
Bristol Electronics
Ampacity Inc.
$0.198
Aranea Global
$0.670
$0.644
Argo Parts USA
$0.663
Metaverse IC Inc.
GreenTree Electronics
Perfect Parts
Continental Prestige Electronics
$0.913
Kepictronics
Authorized Procurement Solutions
High joule integral ensures reliable protection against power surges and spikes.
Suitable for use in standard 250V AC circuits, common in residential and commercial environments.
Compact size allows for easy installation in various electronic devices and equipment.
A high rated current capacity of 16A makes it suitable for protecting electrical circuits with moderate to high power consumption.
Can operate effectively in high-temperature environments without compromising performance.
Fast blow characteristic ensures quick response to overcurrent conditions, helping to prevent damage to connected devices.
High breaking capacity allows the fuse to safely interrupt high fault currents, protecting the circuit and devices.
Can be mounted inline or using a fuse holder, providing flexibility in installation options.
Compliance with multiple international standards ensures product quality and safety.
Fuses 0216016.MXP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0216016.MXP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Mult Dev Vacuum Pkg Update 15/Oct/2012
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
FNQ-R-4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
FWS-10A20F
Eaton Corporation
Eaton Corporation's FWS-10A20F fuse offers 118J nominal joule integral, 1400V AC voltage rating, and 50000A breaking capacity. Ideal for circuit protection in applications requiring a 10A rated current, such as inline or holder mounting setups. Compliant with CE and IEC standards for reliable performance.
FNQ-R-30
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
FNQ-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ATDR10
Mersen S A
The Mersen S A ATDR10 fuse is a 10A, time delay electric fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it has an END CAP terminal shape and inline mounting feature. Ideal for circuit protection in various applications requiring a high breaking capacity of 200kA.
045101.5MRL
Littelfuse
Littelfuse 045101.5MRL is a NANO fuse with 1.5A rated current and 125V rated voltage, suitable for circuit protection in electronics. It has a very fast blow characteristic, trip time of 5s, and 0.853J nominal joule integral. Ideal for surface mount applications with CSA, CUL, PSE, UL certifications.
39601600000
39601600000 fuse by Littelfuse is a TE5 size with rated voltage of 125V and current of 0.16A. It has a time lag blow characteristic, trip time of 60s, and nominal joule integral of 0.058J. Ideal for circuit protection in applications requiring a through hole mounting feature.
ATQR4
ATQR4 by Mersen S A is a 4A electric fuse with time delay blow characteristic. Rated for 600V AC and 300V DC, it has a breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it is commonly used in inline/holder mounting applications for circuit protection.
AJT200/400
AJT200/400 by Mersen S A is a J-class fuse with 200A rated current and 600V AC/DC voltage. Featuring time lag blow characteristic, it offers 200000A breaking capacity. Ideal for electric circuit protection in various applications compliant with IEC and UL standards.
AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
LP-CC-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
LP-CC-30
KTK-R-1
KTK-R-1 fuse by Eaton Corporation is a 1A, 600V fast blow electric fuse with a rated breaking capacity of 200kA. It has a compact body size of 10.3mm x 38.1mm and is commonly used for circuit protection in inline or holder mounting applications.
PV-20A10F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1000 V; Rated Current: 20 A; Terminal Shape: END CAP; Packing Method: BOX;
LP-CC-3-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.2 A; Terminal Shape: END CAP;
FRS-R-40
Eaton Corporation's FRS-R-40 fuse, rated at 40A and 600V AC/300V DC, features time delay blow characteristic with a breaking capacity of 200kA. It comes in a box packing method with end cap terminals, suitable for inline mounting applications. Compliant with CE, CSA, and UL standards, it provides reliable electric circuit protection.
FNQ-R-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.125 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
AJT60
AJT60 fuse by Mersen S A is a 60A time delay electric fuse with a rated AC voltage of 700V and rated DC voltage of 400V. It features a body size of 27mm x 60mm, end cap terminal shape, and inline/holder mounting feature. Ideal for circuit protection in applications requiring high breaking capacity up to 200kA.
JTD125ID
JTD125ID fuse by Littelfuse is a time delay electric fuse with 125A rated current and 600V AC/500V DC voltage. It has a compact body size of 41.3mm x 76.2mm, suitable for inline mounting applications. With a high breaking capacity of 200kA, it is ideal for circuit protection in various industrial settings.
FNQ-R-3-1/2
Eaton Corporation's FNQ-R-3-1/2 fuse, rated at 3.5A and 600V, features a time delay blow characteristic for electric circuit protection. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is suitable for inline mounting applications in CE, CSA, and UL standard compliant systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0216002.MXP
Littelfuse 0216002.MXP fuse, rated at 2A and 250V, offers fast blow characteristic with trip time of 0.02s. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish. Operating temperature range from -55 to 125°C ensures reliable performance in various environments.
0216002MXP
Littelfuse 0216002MXP fuse, rated 2A and 250V, offers fast blow characteristic with trip time of 0.01s. Ideal for electric circuit protection in applications requiring a compact 5x20mm size fuse with high breaking capacity of 1500A. Operating temperature range from -55°C to 125°C ensures reliable performance.
0216001.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Body Length/Diameter: 5.2 mm;
0216001MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP;
0216005MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP;
0216005.MXP
Littelfuse 0216005.MXP fuse, rated at 5A and 250V, offers fast blow characteristic with trip time of 0.02s. With a nominal joule integral of 27.46J, it provides circuit protection in applications requiring a compact 5x20mm size fuse for inline mounting.
0216.063MXP
0216.063MXP by Littelfuse is a fast blow electric fuse with a rated current of 0.063 A and rated voltage of 250 V. It has a trip time of 0.02 seconds and is commonly used for circuit protection in applications such as inline/holder mounting.
021601.6MXP
021601.6MXP fuse by Littelfuse is a 1.6A, 250V fast blow electric fuse with a rated breaking capacity of 1500A. It has a trip time of 0.02s and nominal joule integral of 1.005J, making it ideal for circuit protection in various applications such as inline mounting or use in holders.
021606.3MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 6.3 A; Terminal Shape: END CAP; Fuse Size: 5x20mm;
0216.063MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: PIN WIRE; Reference Standard: CCC; CE; CSA; IEC; SEMKO; UL; VDE;
021606.3MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 6.3 A; Terminal Shape: PIN WIRE; Dimensions: 5.8mm x 22.5mm;
0216004.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: END CAP; Pre Arcing Rating (A2/s): 14.995;
0216004MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: END CAP;
0216.250MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .25 A; Terminal Shape: END CAP; Nominal Joule Integral: .00891 J;
0216.500MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: PIN WIRE; Rated Breaking Capacity: 1500 A;
02163.15MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: PIN WIRE; Nominal Joule Integral: 6.7 J;
0216.315MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: PIN WIRE; Reference Standard: CCC; CE; CSA; IEC; SEMKO; UL; VDE;
02161.25MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1.25 A; Terminal Shape: PIN WIRE; Blow Characteristic: FAST;
0216.125MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .125 A; Terminal Shape: PIN WIRE; Blow Characteristic: FAST;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved