Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTST-C190CKT by Lite-on Technology is a 1.1mm single color LED with peak wavelength of 660nm and max forward current of 0.025A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices. With water clear lens and surface mounting feature, it offers a viewing angle of 130° for versatile usage.
Median Price
$0.350
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Ozdisan Elektronik
1+ parts
$0.027
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$0.210
Forefront Electronics and Design
$0.490
Component Electronics Inc.
$1.150
$0.870
$0.750
Vyrian
Chip Stock
Q Components
Cyclops Electronics Ltd
Diverse Electronics
LIBRA Elektronik GmbH
Semi Source
Connector Distribution Corp
Right Parts Inc.
Technoshack Inc.
Prism Electronics
PC Components Company LLC
ComSIT Distribution GmbH
NPI Materials, Inc.
Sea View Technologies
Bristol Electronics
South Electronics
Mil-Aero Solutions, Inc.
Sunrise Surplus Inc.
ACDS - Activité Composants Distribution Service
Semtec, LLC
Dan-Mar Components
Elcom Components
Speed Components Ltd
Bas Electronics GmbH & Co. KG
Atlantic Semiconductor
Aranea Global
$0.206
$0.198
Continental Prestige Electronics
Argo Parts USA
$0.204
Corohmni
$0.501
Aztec Data Supply Inc.
$0.560
Advanced Electronics
$0.598
$0.569
AZTECH Wire
$4.889
Semicontronic
$12.100
$11.798
$11.737
Cyclops Electronics Ltd (Excess)
Speed Components Ltd (Excess)
Kepictronics
Lucentia Tech
$4.242
Futuretech Components
GreenTree Electronics
Robosynatics
Formix International (Excess)
Having a single configuration makes the LED easy to install and use in various applications without the complexity of multiple configurations.
The small size of 1.1 mm allows for compact designs and integration into space-limited projects.
The high maximum forward current of 0.025 A ensures efficient operation and bright emission of light.
With a peak wavelength of 660 nm, this LED emits a vibrant red light that is visually appealing.
The water-clear lens type ensures maximum light transmission and brightness for optimal performance.
Being a single color LED simplifies the design and ensures consistent color output.
With 2 terminals, the LED is easy to connect and secure in place for reliable operation.
The high maximum operating temperature of 85°C allows the LED to function in a wide range of environments.
The low height of 0.8 mm enables shallow mounting and compact arrangements.
The rectangular shape offers versatility in positioning and alignment for different lighting setups.
The low minimum operating temperature of -30°C ensures reliable performance even in cold conditions.
The tin terminal finish provides good conductivity and corrosion resistance for long-lasting connections.
Even at low luminous intensity levels of 0.0028 cd, this LED can still provide visible light output.
The red color emitted by this LED at the specified wavelength enhances visibility and aesthetics.
The consistent red color output makes this LED suitable for applications where uniformity is key.
The taped and reeled (TR) packing method in a 7-inch reel facilitates automated assembly processes for high-volume production.
The high maximum reverse voltage rating of 5 V protects the LED from reverse polarity or voltage spikes.
The 1.5 mm terminal pitch provides ample spacing for easy soldering and connection in circuit designs.
With a wide viewing angle of 130°, the LED emits light in a broad direction for improved visibility.
The high nominal luminous intensity of 15.4 mcd ensures a bright and intense light output for various applications.
The surface mounting feature simplifies installation on PCBs and allows for efficient use of board space.
The low maximum forward voltage requirement of 2.4 V helps in efficient power utilization and extends battery life.
Visible LEDs LTST-C190CKT attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
LTST-C190CKT Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - Mult Dev EOL 21/Jun/2020
PCN Assembly/Origin - Mult Dev Die Supplier Chg 30/Nov/2020
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
Zetex Plc
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
EU2B-YS3203C
Idec
ROTARY SWITCH;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Micro Commercial Components
OVLLG8C7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 670.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
597-6601-607F
Dialight
Dialight's 597-6601-607F LED has a peak wavelength of 468nm, max forward current of 0.02A, and water-clear lens. Ideal for applications requiring blue light emission with a viewing angle of 70°. Operating temp range from -55°C to 85°C makes it suitable for various lighting solutions.
XHP35B-00-0000-0D0HC430E
Cree Led
SINGLE COLOR LED;
BR1111C-TR
Stanley Electric
Stanley Electric's BR1111C-TR is a 1.2mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.025A. Ideal for surface mount applications, it offers a viewing angle of 141° and nominal luminous intensity of 11.7mcd, making it suitable for various visible LED lighting projects.
598-8170-107F
Dialight's 598-8170-107F is a single color LED with a water-clear lens, emitting green light. With a size of 1.2mm and max forward current of 0.025A, it's ideal for surface mount applications requiring a viewing angle of 140° and luminous intensity of 20.0mcd.
L934GD14V
Kingbright
The Kingbright L934GD14V is a 3mm green LED with a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring a single color light source, such as indicator lights in electronic devices. With a diffused lens and radial mount feature, it offers a viewing angle of 60° for optimal visibility.
HLMP-1700
Quality Technologies
SINGLE COLOR LED; Maximum Forward Current: .0075 A; Maximum Operating Temperature: 100 Cel; No. of Functions: 1; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
SML-P24MUWT86R
ROHM
ROHM's SML-P24MUWT86R is a 1mm DUAL COLOR LED with MILKY WHITE lens. It has max forward current of 0.02A, operating temp range -40 to 85°C. Ideal for applications requiring compact surface mount LEDs with red/yellowish green colors and nominal luminous intensity of 52.0/21.0 mcd.
CMD15-21UGC/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: CLEAR; Maximum Operating Temperature: 85 Cel;
TLHG4400
Temic Semiconductors
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Size: 3 mm;
HDSP-4850
Broadcom
HDSP-4850 by Broadcom is a 10-element single color LED array with peak wavelength of 566nm. It has a max forward current of 0.03A and operates b/w -20 to 85°C. Ideal for applications requiring green light emission in bulk packaging, this rectangular LED array features separate configuration and radial mounting.
569-0107-777F
Dialight's 569-0107-777F is a 3mm orange LED array with 4 separate elements. It has a peak wavelength of 600nm, forward current of 0.025A, and luminous intensity of 7.0mcd. Ideal for applications requiring radial mounting and a viewing angle of 60° in bulk packaging.
150060SS75000
Wuerth Elektronik & Kg
150060SS75000 by Wurth Elektronik is a single color LED with peak wavelength of 645nm and viewing angle of 140°. With a size of 1.1mm, it has a max forward current of 0.03A and nominal luminous intensity of 60.0mcd. Ideal for surface mount applications in electronics requiring super red light emission.
SSF-LXH100YD
Lumex
The Lumex SSF-LXH100YD is a 5mm yellow LED with a peak wavelength of 585nm and a viewing angle of 60°. It has a built-in resistor, operates at temperatures from -40°C to 85°C, and has a luminous intensity of 30.0mcd. Ideal for applications requiring a reliable, bright yellow light source in various electronic devices.
SML-D12M8WT86Q
ROHM SML-D12M8WT86Q is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOWISH GREEN light. Ideal for surface mount applications, it has a luminous intensity of 25.0mcd and operates b/w -40°C to 85°C temperature range.
249-7872-3331-504F
The Dialight 249-7872-3331-504F is a 7.1mm red LED with max forward current of 0.02A and max forward voltage of 28V. Ideal for panel mounting applications, it has a luminous intensity of 55.0mcd and operates b/w -20°C to 71°C temperature range.
HLMP-4000
Agilent Technologies
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.1/4.2; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTV-356T-V
Lite-on Technology
SINGLE COLOR LED; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
CLP6C-FKB-CKNPRGJBB7A363
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 840.0/1680.0/420.0; Maximum Operating Temperature: 100 Cel; Size: 4 mm;
SML-P11UTT86RJ
ROHM SML-P11UTT86RJ is a 0.6mm SINGLE COLOR LED with 2 terminals. It has a max forward current of 0.02A and operates b/w -40 to 85°C. Ideal for surface mount applications requiring a red light source with 3.25mcd luminous intensity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTST-C190GKT
LTST-C190GKT by Lite-on Technology is a 1.1mm GREEN LED with WATER CLEAR lens, operating at -55 to 85 °C. It has a peak wavelength of 565nm, forward current of 0.03A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with max luminous intensity of 9.9mcd.
LTST-C190KGKT
LTST-C190KGKT by Lite-on Technology is a 1.1mm GREEN LED with peak wavelength of 574nm, suitable for surface mount applications. It has a max forward current of 0.03A and viewing angle of 130°, making it ideal for low-power indicator lights in electronic devices. Operating temperature ranges from -30 to 85 °C.
LTST-C191KGKT
LTST-C191KGKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and ultra bright green color. It has a max forward current of 0.03A, viewing angle of 130°, and nominal luminous intensity of 44.5mcd. Ideal for surface mount applications in electronics requiring high brightness green-yellow illumination.
LTST-C190KRKT
LTST-C190KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm. It has a max forward current of 0.025A and viewing angle of 260°, making it ideal for surface mount applications in various electronic devices. With a water clear lens type and red color, this LED operates b/w -30°C to 85°C temperature range.
LTST-C191KRKT
LTST-C191KRKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 639nm, emitting RED light at 54.0mcd luminous intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55 to 85°C, making it suitable for various electronic devices.
LTST-C150CKT
LTST-C150CKT by Lite-on Technology is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and a viewing angle of 130°. Ideal for surface mount applications, this red LED operates b/w -55 to 85 °C temperatures.
LTST-C170KGKT
LTST-C170KGKT by Lite-on Technology is a 1.4mm GREEN LED with WATER CLEAR lens. It has a peak wavelength of 574nm, forward current of 0.03A, and luminous intensity of 35.0mcd. Ideal for surface mount applications in electronics due to its compact size and wide viewing angle of 130°.
LTST-C191KGKT-5A
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
LTST-C193KGKT-5A
LTST-C193KGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 574nm, viewing angle of 130°, and luminous intensity of 16.25mcd. Ideal for surface mount applications in electronics, it operates b/w -55°C to 85°C temperature range and has a compact size of 1.15mm x 0.35mm.
LTST-C190GKTT
LTST-C190GKTT by Lite-on Technology is a single color LED with peak wavelength of 565nm and viewing angle of 130°. With a size of 1.06mm, it has a max forward current of 0.03A making it suitable for surface mount applications in electronics requiring green light emission.
LTST-C19HE1WT
LTST-C19HE1WT by Lite-on Technology is a single color LED with diffused white lens. It has a max forward current of 0.03A and operates b/w -20°C to 80°C. Ideal for applications requiring blue, blue-green, orange-red light emission with a min luminous intensity of 130cd.
LTST-C191TBKT-5A
Visible LEDs;
LTST-C191TBKT
LTST-C191TBKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with WATER CLEAR lens emitting ULTRA BRIGHT BLUE light at 468nm wavelength. It has a max forward current of 0.02A and viewing angle of 130°, making it ideal for surface mount applications requiring high luminous intensity up to 104.0mcd.
LTST-C170KRKT
LTST-C170KRKT by Lite-on Technology is a 1.4mm single color LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
LTST-C193TBKT-5A
LTST-C193TBKT-5A by Lite-on Technology is a 1.15mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and operates b/w -20°C to 80°C temperature range.
LTST-C191KRKT-5A
LTST-C171KGKT
LTST-C171KGKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 574nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55°C to 85°C temperatures.
LTST-C150KGKT
LTST-C150KGKT by Lite-on Technology is a single color LED with a peak wavelength of 574nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 130° and nominal luminous intensity of 35.0mcd. Ideal for surface mount applications requiring green-yellow light emission in compact spaces.
LTST-C193KRKT-5A
LTST-C193KRKT-5A by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.02A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices. With a viewing angle of 130° and water clear lens type, it offers high luminous intensity at 26.05mcd.
LTST-C195KGJRKT
LTST-C195KGJRKT by Lite-on Technology is a 1.5mm DUAL COLOR LED with WATER CLEAR lens, featuring RED/GREEN colors and peak wavelengths of 639nm/574nm. It has a max forward current of 0.03A and viewing angle of 130°, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved