Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 7; Terminal Form: GULL WING; Package Shape: RECTANGULAR; No. of Outputs: 1; Technology: BIPOLAR;
Median Price
$10.320
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$8.230
100+ parts
$4.610
1k+ parts
$3.810
10k+ parts
-
DigiKey
$10.020
$6.662
$6.057
Newark
$6.860
$6.390
Mouser Electronics
$6.230
Analog Devices Inc
$10.350
$5.208
$4.420
Element14
$13.260
$9.920
$7.530
Verical
$5.908
Nova Conductors
$5.796
Digiode
$6.926
Anansix
Chip Stock
Vyrian
Parana Technologies
$4.074
$3.789
IDEA Electronic Components Group
$4.381
$4.162
Ampacity Inc.
$5.020
Semicontronic
$4.894
$4.869
MARBEL Systems
$5.194
Corohmni
$5.680
Netroflash
$5.506
$5.390
Advanced Electronics
$5.850
$5.558
Texas Native Microelectronics
$5.970
$5.731
$5.552
$5.254
Aztec Data Supply Inc.
$5.990
Corphita
$6.561
DigiPath Technology Company
$6.834
Kenton Components
$7.164
$6.304
Continental Prestige Electronics
$8.140
$6.080
Qasali Group International
$16.119
$14.991
$14.185
Microchip USA
$27.132
RC Electronics
iodParts Technologies Inc.
Futuretech Components
Argo Parts USA
Robosynatics
Lucentia Tech
$5.566
$5.453
Adjustable Regulators - Negative Single Output LDO LT3091ER#PBF attributes and parameters. Explore more Adjustable Regulators - Negative Single Output LDO devices from Linear Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Shape:
Package Style (Meter):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LT3091ER#PBF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1554216004
Molex
WIRE AND CABLE;
EU2B-YS3203C
Idec
ROTARY SWITCH;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
CRCW06030000Z0EAHP
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
Weitronic Enterprise
LT1964ES5-SD
Analog Devices
LT1964ES5-SD by Analog Devices is an adjustable negative single output LDO regulator with a max dropout voltage of 0.49V and a max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
V62/21616-01XE
Texas Instruments
V62/21616-01XE by Texas Instruments is an adjustable negative single output LDO regulator with a total dose of 30k Rad(Si). It features a max dropout voltage of 0.5V and can operate in temperatures ranging from -55 to 125°C. This chip carrier package is suitable for applications requiring precise voltage regulation in radiation-prone environments.
LT3091IR#PBF
LT3091IR#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.42V. This bipolar technology regulator has a package style of small outline, making it suitable for applications requiring precise voltage regulation in compact spaces.
LT3015EQ#PBF
Linear Technology
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Line Regulation (%/V): .018; Maximum Output Current-1: 1.5 A; Nominal Dropout Voltage-1: .41 V;
5962F0250301VXX
Renesas Electronics
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 28; Package Code: DFP; Terminal Form: FLAT; Screening Level: MIL-PRF-38535 Class V; Surface Mount: YES;
LT1964EDD#TRPBF
LT1964EDD#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output voltage of 20V and max dropout voltage of 0.49V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM2991T
LM2991T by Texas Instruments is an adjustable negative single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
MIC5271YM5-TR
MIC5271YM5-TR by Microchip Technology is an adjustable negative single output LDO regulator with a max output voltage of 14V and dropout voltage of 0.9V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT1185MK#PBF
LT1185MK#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 3A and max dropout voltage of 1V. It operates in temperatures ranging from -55 to 150 °C, making it suitable for various applications requiring precise voltage regulation in challenging environments. The package style is flange mount with a metal body material, ideal for robust industrial designs.
LM2991T-2
LM2991T-2 by Texas Instruments is an adjustable negative single output LDO regulator with a max output voltage of 25V and max dropout voltage of 0.8V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, ideal for robust and reliable circuit designs.
LM2991TFLOWLB03
LM2991TFLOWLB03 by Texas Instruments is an adjustable negative single output LDO regulator with a max output voltage of 24V and max dropout voltage of 1V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LT1185CT-30
LT1185CT-30 by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 3A and max dropout voltage of 1V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with a rectangular shape and through-hole terminals, providing ease of installation and reliability in different environments.
LT1185CQ
LT1185CQ by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 3A and a max dropout voltage of 1V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline, making it ideal for surface mount applications where space is limited.
LT3090HMSE#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 150 Cel; Operating Temperature (TJ-Min): -40 Cel;
LT3091IDE#TRPBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-N14;
LT3091IFE#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HTSSOP; Terminal Form: GULL WING; Minimum Output Voltage-1: 0 V; JESD-30 Code: R-PDSO-G16;
LT3093IMSE#PBF
LT3093IMSE#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output voltage of 19.5V and a max output current of 0.2A. It is designed for applications requiring precise voltage regulation in compact spaces, featuring a small outline package style with gull wing terminals suitable for surface mount assembly. Operating temperature range from -40°C to 125°C makes it versatile for various electronic devices.
LT1185CT#33PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: ZIP; Terminal Form: THROUGH-HOLE; Package Equivalence Code: ZIP5,.15,.2,67TB; Terminal Position: ZIG-ZAG;
LT3090MPMSE#PBF
LT3090MPMSE#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output voltage of 32V and a max dropout voltage of 0.45V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT1185IQ#TR
Analog Devices' LT1185IQ#TR is an adjustable negative single output LDO regulator with a max output current of 3A and a max dropout voltage of 1V. It operates in temperatures ranging from -40 °C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT3094EDD#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HVSON; Terminal Form: NO LEAD; Package Shape: SQUARE; Moisture Sensitivity Level (MSL): 1;
LT3094IMSE#PBF
Analog Devices' LT3094IMSE#PBF is an adjustable negative single output LDO regulator with a max output current of 0.5A and dropout voltage of 0.41V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3094EMSE#PBF
Analog Devices' LT3094EMSE#PBF is an adjustable negative single output LDO regulator with a max output current of 0.5A and dropout voltage of 0.41V. Ideal for applications requiring precise load regulation, it operates in temperatures ranging from -40 to 125°C and has a max input-output voltage differential of 20V.
LT3015EDD#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Dropout Voltage-1: .5 V; Operating Temperature (TJ-Max): 125 Cel;
LT3015EDD#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and dropout voltage of 0.5V. It operates b/w temperatures of 0-125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline with a very thin profile, ideal for surface mount designs where space is limited.
LT3015EQ#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and a dropout voltage of 0.68V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LT3091ER#PBF
Analog Devices' LT3091ER#PBF is an adjustable negative single output LDO regulator with a max output current of 1.5A and dropout voltage of 0.42V. Ideal for applications requiring precise voltage regulation in compact spaces, such as portable electronics or industrial control systems.
LT3094IDD#PBF
LT3094IDD#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max dropout voltage of 0.41V and a max input-output voltage differential of 20V. It is suitable for applications requiring precise voltage regulation in a small form factor package.
LT3091EDE#PBF
LT3091EDE#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.36V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40 to 125°C, making it versatile for various environments. This surface-mount device features a small outline package style with very thin profile, ideal for space-constrained designs.
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Package Shape: RECTANGULAR; Surface Mount: YES;
LT3091MPDE#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Finish: MATTE TIN; Package Body Material: PLASTIC/EPOXY;
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Finish: MATTE TIN; Adjustability: ADJUSTABLE;
LT3094HMSE#PBF
LT3094HMSE#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max dropout voltage of 0.41V and a max input-output voltage differential of 20V. It is commonly used in applications requiring precise voltage regulation, such as power management systems in electronic devices.
LT3091IDE#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.36V, making it suitable for applications requiring precise voltage regulation in compact spaces. Its small outline package style and surface mount capability make it ideal for space-constrained designs where thermal management is crucial. Operating efficiently within a wide temperature range from -40°C to 125°C, this bipolar technology-based regulator offers reliable performance in various environments.
Analog Devices' LT3091IFE#PBF is an adjustable negative single output LDO regulator with a max output current of 1.5A and dropout voltage of 0.36V. Ideal for applications requiring precise voltage regulation in compact spaces, this device operates within a wide temperature range from -40 to 125°C.
LT3094HDD#PBF
LT3094HDD#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.41V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved