Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$6.196
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$3.028
100+ parts
$2.877
1k+ parts
10k+ parts
-
Chip1Stop
$4.790
$3.530
$3.130
Farnell
$4.641
$3.522
$3.419
Mouser Electronics
$6.970
$4.490
$4.100
$4.030
DigiKey
$7.070
$4.594
$4.452
$4.036
Newark
$4.590
$4.410
Analog Devices Inc
$7.600
$3.672
$2.910
$3.163
Arrow
$3.244
Element14
$4.806
$3.664
$3.523
Digiode
Nova Conductors
$3.300
Vyrian
Cyclops Electronics Ltd
Chip Stock
Anansix
Bristol Electronics
Semicontronic
$2.570
$2.506
$2.493
Corphita
$2.725
Corohmni
$2.940
Advanced Electronics
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$3.302
Continental Prestige Electronics
$5.190
$3.820
$2.740
Vigor
$5.510
MARBEL Systems
$6.394
Texas Native Microelectronics
$7.350
$7.056
$6.836
$6.468
Kenton Components
$8.820
$7.762
Parana Technologies
$11.764
$10.941
IDEA Electronic Components Group
$12.650
$12.018
DigiPath Technology Company
$19.734
$18.945
Qasali Group International
$19.845
$18.456
$17.464
RC Electronics
$4.440
$4.190
Glotronic Ltd.
A-Z Elektronik GmbH
Robosynatics
Lucentia Tech
Futuretech Components
Line Drivers & Receivers LT1785CS8#TRPBF attributes and parameters. Explore more Line Drivers & Receivers devices from Linear Technology
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
LT1785CS8#TRPBF Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Telefunken Microelectronics
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bytesonic Electronics
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
World Products
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
MAX13487EESA+
Analog Devices
MAX13487EESA+ by Analog Devices is a Line Transceiver IC with BICMOS technology. It operates at 5V, has EIA-422-B and EIA-485 interface standards, and offers differential outputs. With a max supply voltage of 5.25V, it is ideal for industrial applications requiring reliable data transmission over long distances.
ICL3221EIAZ-T
Integrated Device Technology
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX3221EEAE-T
Maxim Integrated
MAX3221EEAE-T by Maxim Integrated is a Line Driver & Receiver with 16 terminals, operating voltage of 3-5.5V, and peak output current of 1.6A. Ideal for industrial applications requiring EIA-232, TIA-232, V.24, or V.28 interface standards in a compact package style with Schmitt trigger input characteristics.
ISL3295EIHZ-T7A
Renesas Electronics
ISL3295EIHZ-T7A by Renesas Electronics is an EIA-485/EIA-422 line driver with a 3.3V nominal voltage, 42ns max transmit delay, and -40 to 85°C operating temperature range. It is ideal for industrial applications requiring differential output and standard input characteristics in a compact package with dual terminals.
ISO35TDWR
Texas Instruments
The Texas Instruments ISO35TDWR is a line driver & receiver with 16 terminals, operating at 3.3V power supply. It features a max transmit delay of 340ns and can handle up to 8A output low current. Ideal for industrial applications requiring EIA-485/EIA-422 interface standards in compact designs.
SN65HVD32DR
SN65HVD32DR by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 305ns max transmit delay, and 70ns max receive delay. Ideal for industrial applications requiring EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A, V.11 interface standards in a compact package style with dual terminals and CMOS technology.
DS34LV86TM/NOPB
DS34LV86TM/NOPB by Texas Instruments is a 16-terminal line driver with 3.3V power supply, operating b/w -40 to 85°C. It features EIA-422-B interface standard, differential output, and 4-bit receiver for industrial applications requiring high-speed data transmission.
DS10BR150TSD/NOPB
DS10BR150TSD/NOPB by Texas Instruments is a Line Driver with 3.6V max supply voltage, 0.6ns max transmit delay, and 3.3V power supplies. Ideal for industrial applications requiring differential output characteristics and operating temperatures from -40 to 85°C.
ISOW1412DFMR
ISOW1412DFMR by Texas Instruments is a line driver/receiver with 20 terminals, operating at -40 to 125°C. It supports EIA-422 and EIA-485 interfaces, with true output polarity and differential output. This industrial-grade IC has a small outline package style for applications requiring reliable data transmission in harsh environments.
MAX202ECSE+T
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3221CPWR
MAX3221CPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has a max supply voltage of 5.5V and operates in commercial temperature grade from 0 to 70°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces due to its CMOS technology and Schmitt trigger input characteristics.
MAX485ESA+T
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ISL3176EIUZ-T
ISL3176EIUZ-T by Renesas Electronics is a Line Driver & Receiver with 3.6V max supply voltage, EIA-422/EIA-485 interface standard, and BICMOS technology. It operates in industrial temperature range (-40 to 85 °C) and features differential output for reliable data transmission. Ideal for applications requiring robust communication interfaces in compact designs.
SP485EN-L/TR
Exar
Exar's SP485EN-L/TR is a BICMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply voltage of 5.25V, and can withstand industrial temperatures from -40 to 85°C. Ideal for applications requiring differential output and Schmitt trigger input characteristics in compact designs.
MAX232NSR
MAX232NSR by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It features inverted output polarity, Schmitt trigger input characteristics, and supports EIA-232-F interface standard. Ideal for applications requiring BICMOS technology in commercial temperature grade environments.
MAX3232CSE+
DS90LV011ATMFX/NOPB
LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
MAX232CWE-T
MAX232CWE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 10000ns and output polarity is inverted. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial temperature grade applications.
ISO1432BDWR
ISO1432BDWR by Texas Instruments is a line driver & receiver with a plastic/epoxy package. It has a max supply voltage of 5.5V and operates in automotive temperature grade. This interface IC type is commonly used for EIA-485-A, TIA-485-A, and EIA-422 applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT1791IS#PBF
Linear Technology
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LT1791IS#PBF by Analog Devices is a Line Driver & Receiver with 14 terminals, operating at -40 to 85°C. It features a max supply voltage of 5.25V and differential output characteristics suitable for EIA-422 and EIA-485 interfaces. Ideal for industrial applications requiring high-speed data transmission within tight dimensional constraints.
LT1785CN8#PBF
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LT1785CN8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 4.75-5.25V. It offers differential output, EIA-422/EIA-485 interface standards, and operates in commercial temperature range of 0-70°C. Ideal for applications requiring high-speed data transmission and noise immunity in industrial settings.
LT1785AIS8#PBF
LT1785AIS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating voltage range of 4.75-5.25 V, and differential output. It has a max transmit delay of 2000 ns and receive delay of 900 ns, suitable for EIA-422/EIA-485 interface applications in industrial settings.
LT1785IS8#PBF
LT1785AIS8#TRPBF
LT1785AIS8#TRPBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at -40 to 85 °C. It has a max supply voltage of 5.25 V and differential output characteristics. Ideal for EIA-422 and EIA-485 interface standards in industrial applications.
LT1791AIS#PBF
LT1791AIS#PBF by Analog Devices is a Line Driver & Receiver with 14 terminals, operating at -40 to 85°C. It features a max supply voltage of 5.25V, differential output, and interface standards EIA-422/EIA-485. Ideal for industrial applications requiring differential Schmitt trigger input characteristics and small outline package style.
LT1785IS8#TRPBF
LT1785CS8#PBF
LT1785CS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 4.75-5.25 V. It offers differential output, EIA-422/EIA-485 interface standards, and operates b/w 0-70°C. Ideal for applications requiring high-speed data transmission in commercial-grade environments.
LT1785CS8#TRPBF
LT1785CS8#TRPBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 0-70°C. It has a max supply voltage of 5.25V and differential output. Ideal for EIA-422/EIA-485 interfaces, this small outline package supports surface mount applications efficiently.
LT1785ACS8#TRPBF
LT1785CN8
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved