Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$7.915
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$6.380
100+ parts
$3.980
1k+ parts
-
10k+ parts
Farnell
$7.007
$5.233
$3.970
DigiKey
$7.800
$5.105
$4.620
Mouser Electronics
$8.030
$5.250
$4.740
Newark
$4.870
Analog Devices Inc
$8.430
$4.126
$3.350
Element14
$14.070
$6.880
$6.080
Verical
Arrow
$5.084
$4.607
Nova Conductors
$4.150
Digiode
$6.061
Component Electronics Inc.
$9.230
$6.920
$6.000
Vyrian
Chip Stock
Anansix
Contempo Components LLC
Bristol Electronics
A&K Electronics
Huijzer Components
Connector Distribution Corp
Right Parts Inc.
Lantek
Inventory MP
Cyclops Electronics Ltd
Corohmni
$2.820
MARBEL Systems
$3.336
Texas Native Microelectronics
$3.834
$3.681
$3.566
$3.374
Advanced Electronics
$3.996
$3.957
$3.797
Argo Parts USA
Continental Prestige Electronics
$4.067
Kenton Components
$4.601
$4.049
Ampacity Inc.
$5.420
Semicontronic
$5.284
$5.257
Corphita
$5.742
Vigor
$6.150
Qasali Group International
$10.352
$9.627
$9.110
Parana Technologies
$12.588
$11.706
IDEA Electronic Components Group
$13.535
$12.858
Microchip USA
$17.860
$17.610
$17.480
$17.350
DigiPath Technology Company
$21.115
$20.270
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Alle Elektronik GmbH
Netroflash
$3.943
$3.860
Lucentia Tech
$1.938
A-Z Elektronik GmbH
GreenTree Electronics
Line Drivers & Receivers LT1785IS8#PBF attributes and parameters. Explore more Line Drivers & Receivers devices from Linear Technology
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
LT1785IS8#PBF Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Dev 12/Oct/2022 Laser Top Mark 16/Jun/2021
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358AN
Onsemi
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Continental Device India
Sangdest Microelectronics (Nanjing)
General Instrument
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AM26LV32EIRGYR
Texas Instruments
AM26LV32EIRGYR by Texas Instruments is a Line Driver & Receiver with 4 functions, operating at 3.3V. It features EIA-422-B, TIA-422-B, V.11 interface standard and has a max receive delay of 26ns. Ideal for industrial applications requiring differential Schmitt trigger input characteristics.
SP335EER1-L
Maxlinear
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SP3232EEN-L/TR
Sipex
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
LT1791IS#PBF
Linear Technology
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LT1381CS#PBF
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3160EEAP-T
Maxim Integrated
MAX3160EEAP-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V supplies, 800ns max transmit delay, and 150ns max receive delay. It's used in industrial applications requiring EIA-232, EIA-422, or EIA-485 interfaces for reliable data transmission over short distances.
P82B96DGKRG4
P82B96DGKRG4 by Texas Instruments is a Line Transceiver with 2 functions, operating at temperatures from -40 to 85°C. It has a max supply voltage of 15V and min of 2V, suitable for industrial applications requiring standard input characteristics. This small outline package with dual terminals and Gull Wing form factor is ideal for space-constrained designs.
ST485ERBDR
ST485ERBDR by STMicroelectronics is a Line Driver & Receiver with 8 terminals, operating voltage of 4.75-5.25 V, and max transmit delay of 60 ns. It has EIA-422/EIA-485 interface standard for industrial applications requiring differential output and Schmitt trigger input characteristics.
SN65HVD1780DR
SN65HVD1780DR by Texas Instruments is a line driver/receiver with 3.3/5V power supplies, EIA-485-A interface standard, and 2000ns max transmit delay. Ideal for industrial applications requiring differential output and operating temperatures from -40 to 105°C.
ST485CDR
ST485CDR by STMicroelectronics is a Line Driver & Receiver with 5V supply, 70ns max transmit delay, and EIA-422/EIA-485 interface standard. Ideal for applications requiring differential output, such as industrial automation and communication systems.
SN65HVD08DR
SN65HVD08DR by Texas Instruments is a Line Driver & Receiver with 3.3/5 V power supplies, 40 ns max transmit delay, and EIA-485-A interface standard. Ideal for industrial applications requiring true output polarity, differential output, and dual terminal position in a small outline package style.
MAX3232ECWE+
Analog Devices
MAX3232ECWE+ by Analog Devices is a Line Driver & Receiver with 16 terminals. It operates at 3-5.5V, suitable for EIA-232 and TIA-232 interfaces. With BICMOS technology, it has a small outline package ideal for commercial temperature applications.
MAX3232EEAE+T
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX3430ESA+T
MAX3430ESA+T by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 8 terminals and offers differential output. Ideal for industrial applications requiring reliable communication over short distances.
ISL3330IAZ
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
SN65LBC176DRG4
SN65LBC176DRG4 by Texas Instruments is a Line Driver & Receiver with 5.25V max supply voltage, 25ns max transmit delay, and 33ns max receive delay. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482 interface standards in a compact small outline package.
SN65HVD72DGK
SN65HVD72DGK by Texas Instruments is a Line Transceiver with 8 terminals, operating at 3.3V. It offers EIA-422 and EIA-485 interface standards, with a max supply voltage of 3.6V. Ideal for automotive applications due to its wide temperature range (-40°C to 125°C) and differential output capability.
ISL3295EFHZ-T
LINE DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
ADM3485EARZ
ADM3485EARZ by Analog Devices is a BICMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has a max supply current of 1.5mA, and offers differential output. Ideal for industrial applications requiring reliable communication over long distances with low power consumption.
SP3232EEY-L
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT1791IS#PBF by Analog Devices is a Line Driver & Receiver with 14 terminals, operating at -40 to 85°C. It features a max supply voltage of 5.25V and differential output characteristics suitable for EIA-422 and EIA-485 interfaces. Ideal for industrial applications requiring high-speed data transmission within tight dimensional constraints.
LT1785CN8#PBF
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LT1785CN8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 4.75-5.25V. It offers differential output, EIA-422/EIA-485 interface standards, and operates in commercial temperature range of 0-70°C. Ideal for applications requiring high-speed data transmission and noise immunity in industrial settings.
LT1785AIS8#PBF
LT1785AIS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating voltage range of 4.75-5.25 V, and differential output. It has a max transmit delay of 2000 ns and receive delay of 900 ns, suitable for EIA-422/EIA-485 interface applications in industrial settings.
LT1785IS8#PBF
LT1785AIS8#TRPBF
LT1785AIS8#TRPBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at -40 to 85 °C. It has a max supply voltage of 5.25 V and differential output characteristics. Ideal for EIA-422 and EIA-485 interface standards in industrial applications.
LT1791AIS#PBF
LT1791AIS#PBF by Analog Devices is a Line Driver & Receiver with 14 terminals, operating at -40 to 85°C. It features a max supply voltage of 5.25V, differential output, and interface standards EIA-422/EIA-485. Ideal for industrial applications requiring differential Schmitt trigger input characteristics and small outline package style.
LT1785IS8#TRPBF
LT1785CS8#PBF
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LT1785CS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 4.75-5.25 V. It offers differential output, EIA-422/EIA-485 interface standards, and operates b/w 0-70°C. Ideal for applications requiring high-speed data transmission in commercial-grade environments.
LT1785CS8#TRPBF
LT1785CS8#TRPBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 0-70°C. It has a max supply voltage of 5.25V and differential output. Ideal for EIA-422/EIA-485 interfaces, this small outline package supports surface mount applications efficiently.
LT1785ACS8#TRPBF
LT1785IS8#TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved