Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VCAS080530A650DP by KYOCERA AVX is a VARISTOR with 30V operating voltage and 0.1J energy absorbing capacity. It has dual-ended terminals, SMT package style, and matte tin finish. Ideal for applications requiring protection against voltage surges in automotive electronics due to its AEC-Q200 reference standard compliance.
Median Price
$0.230
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.101
Verical
Chip1Stop
$0.240
$0.106
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Nova Conductors
Authorized Procurement Solutions
Abacus Technologies
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Dual-ended terminal placement allows for easy installation and connection in a circuit, providing flexibility and convenience.
With a high energy absorbing capacity, this product can effectively protect electronic components from voltage surges and transient events.
The high operating voltage ensures the product can handle a wide range of voltage levels, making it versatile and suitable for various applications.
Surface mount package style makes it easy to integrate this product onto PCBs, saving space and improving overall circuit design.
The maximum circuit RMS voltage rating ensures reliable performance and protection against overvoltage conditions within specified limits.
Non-linear Resistors VCAS080530A650DP attributes and parameters. Explore more Non-linear Resistors devices from KYOCERA AVX
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Reference Standard:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
VCAS080530A650DP Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Assembly/Origin - Conformal Tantalum Production 22/Jun/2020
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
NXP Semiconductors
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
Hitano Enterprise
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
RUEF110-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .17 ohm; Rated Power Dissipation (P): .7 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin/Copper (Sn/Cu);
0603L100SLYR
0603L100SLYR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 6V, and rated power dissipation of 0.6W. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
MF-PSMF010X-2
The Bourns MF-PSMF010X-2 is a PTC resettable fuse with a resistance of 1 ohm. It is used for overcurrent protection in various applications. With its dual-ended terminal placement and rectangular package shape, it offers easy surface mounting and operates within a temperature range of -40 to 85 °C.
MICROSMD005F-2
TE Connectivity
TE Connectivity's MICROSMD005F-2 is a PTC resettable fuse with dual-ended terminals, suitable for temperature sensing applications. With a max operating temperature of 85°C and operating voltage of 30V, this surface mount device comes in a compact rectangular package measuring 3.2mm x 2.5mm x 0.85mm. It meets reference standards such as CSA, TUV, and UL for reliable performance in various electronic circuits.
RXEF185K-2
TE Connectivity's RXEF185K-2 is a PTC resettable fuse with resistance of 0.19 ohm and rated power dissipation of 2.1W. Ideal for temperature sensing applications, it operates at temperatures ranging from -40 to 85°C with a max AC voltage of 72V. Its radial terminal placement and disk package shape make it suitable for through-hole mounting in various electronic devices.
NTCS0603E3103FMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
B72220S0681K101
TDK
B72220S0681K101 by TDK is a VARISTOR with 680V max RMS voltage and 895V operating voltage. With a max energy absorption of 250J, it is ideal for surge protection applications in electronics. Featuring radial terminal placement and metal oxide technology, this varistor has a temperature range from -40°C to 105°C.
V33MLA1206H
V33MLA1206H by Littelfuse is a VARISTOR with 33 V operating voltage and 0.8 J energy capacity. It has a max circuit RMS voltage of 26 V, suitable for surge protection in electronic circuits. With surface mounting type and dual-ended terminals, it offers reliable overvoltage protection in compact designs.
NTCS0805E3103FHT
Vishay Intertechnology
Vishay Intertechnology's NTCS0805E3103FHT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3940 K. It is used for temperature sensing applications in a surface mount package with dual-ended terminals. Operating temperature ranges from -40 to 150 °C.
NCP18XQ102J03RB
Murata Manufacturing
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
RXEF110K-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; Packing Method: TR; Minimum Operating Temperature: -40 Cel;
16R400GPR
16R400GPR by Littelfuse is a PTC resettable fuse with a resistance of 0.021 ohm and an operating voltage of 16V. It is used for overcurrent protection in applications such as through hole mounting.
B72210-S271-K101
TDK's B72210-S271-K101 varistor has a max energy capacity of 43J, operating voltage of 350V, and max circuit RMS voltage of 275V. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
B59950C0120A070
The TDK B59950C0120A070 is a PTC thermistor with 3.7 ohm resistance and rated for 80V operating voltage. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With a temperature range of -40 to 125 °C, it offers reliable protection in various electronic circuits.
PTCCL05H110HBE
Vishay Intertechnology's PTCCL05H110HBE is a PTC thermistor with 3000 ohm resistance, rated for 265 V AC voltage. Ideal for overload protection applications, it has a radial terminal placement and disk package shape. With a tolerance of 20%, it operates b/w -25°C to 125°C, suitable for through-hole mounting.
RUEF400K
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2;
2920L075DR
2920L075DR by Littelfuse is a PTC resettable fuse with resistance of 0.35 ohm and operating voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
B57230V2103F260
B57230V2103F260 by TDK is a NTC thermistor with 10000 ohm resistance and 1% tolerance. It has dual-ended terminals, SMT package style, and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, it offers a rated power dissipation of 0.15 W in a compact package measuring 1mm x 0.5mm x 0.6mm.
R2920-150
Optifuse
Optifuse R2920-150 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 33V, and temperature range from -40 to 85°C. It is used for temperature sensing applications with dual-ended terminals in surface mount package style.
LVR100S-240
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .218 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Terminals: 2;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VCAS06AG183R0YAT3A
KYOCERA AVX
KYOCERA AVX's VCAS06AG183R0YAT3A is a VARISTOR with 18V operating voltage, 14V max RMS voltage, and -55 to 125 °C temp range. Ideal for AEC-Q200 compliant automotive applications due to its SMT package style and dual-ended terminal placement.
VCAS06AG18120YAT3A
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Maximum Circuit RMS Voltage: 14 V; Terminal Shape: WRAPAROUND;
VCAS040218X400WP
VCAS040218X400WP by KYOCERA AVX is a VARISTOR with max. operating voltage of 18V and energy capacity of 0.05J. It is a surface mount component suitable for non-linear resistor applications, offering dual-ended terminals in a rectangular package design. Operating temp range: -55 to 125 °C.
VCAS080531C650DP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .005 W; Maximum Operating Temperature: 125 Cel; Width (Package): 1.25 mm; Reference Standard: AEC-Q200;
VCAS080518A400RP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .002 W; Maximum Operating Temperature: 125 Cel; Packing Method: TR, 7 INCH; Operating Voltage: 18 V;
VCAS121026H560DP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .018 W; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Operating Voltage: 26 V;
VCAS080538C770RP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .006 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 38 V; Height (Package): 1.02 mm;
VCAS120630D650DP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .008 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 30 V; Maximum Circuit RMS Voltage: 21 V;
VCAS06LC18X500TP
KYOCERA AVX's VCAS06LC18X500TP is a VARISTOR with 18V operating voltage, 0.05J energy absorption, and -55 to 125 °C temperature range. Ideal for surface mount applications in protecting circuits from overvoltage spikes.
VCAS121060J121RP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .03 W; Maximum Operating Temperature: 125 Cel; Reference Standard: AEC-Q200; Height (Package): 1.7 mm;
VCAS080518C400RP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .007 W; Maximum Operating Temperature: 125 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Terminal Placement: DUAL ENDED;
VCAS080518C400DP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .007 W; Maximum Operating Temperature: 125 Cel; Operating Voltage: 18 V; Reference Standard: AEC-Q200;
VCAS080530A650RP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .002 W; Maximum Operating Temperature: 125 Cel; Operating Voltage: 30 V; Height (Package): 1.02 mm;
VCAS080530A650TP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .002 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Reference Standard: AEC-Q200;
VCAS080530C650DP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .005 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; JESD-609 Code: e3;
VCAS080530C650RP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .005 W; Maximum Operating Temperature: 125 Cel; Package Style (Meter): SMT; Width (Package): 1.25 mm;
VCAS080530C650TP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .005 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 30 V; No. of Terminals: 2;
VCAS080538C770DP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .006 W; Maximum Operating Temperature: 125 Cel; Width (Package): 1.25 mm; Operating Voltage: 38 V;
VCAS080538C770TP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .006 W; Maximum Operating Temperature: 125 Cel; Reference Standard: AEC-Q200; Terminal Finish: MATTE TIN OVER NICKEL;
VCAS080531C650RP
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .005 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Packing Method: TR, 7 INCH;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved