Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
12105C106KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size and high operating temperature range of -55 to 125°C.
Median Price
$0.371
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.070
100+ parts
$0.067
1k+ parts
10k+ parts
-
Arrow
$0.667
Distrelec
$0.795
$0.632
$0.566
Newark
$0.908
$0.426
$0.353
$0.338
Element14
$0.307
Farnell
$0.221
TTI Europe
$0.244
$0.234
Future Electronics
$0.770
$0.750
Chip1Stop
Verical
Flip Electronics
$0.152
Nova Conductors
$0.292
Maritex
$0.490
$0.296
$0.217
Voyager Components
$1.071
TME
$1.150
$0.280
$0.232
IBS Electronics
$1.276
$1.593
$1.058
Vyrian
Martec Srl
NAC Semi
$1.700
North Shore Components
Component Sense
LIBRA Elektronik GmbH
Chip Stock
Rutronik
$0.182
$0.179
Zilex Electronics Inc.
ComSIT Distribution GmbH
Holdelec - ElecDif-Pro
Connector Distribution Corp
Right Parts Inc.
LWI Electronics Inc
Bristol Electronics
Avant Electronics Limited
VNN
Sensible Micro Corp
Cyclops Electronics Ltd
Semtec, LLC
Contempo Components LLC
Elcom Components
NexGen Digital
Ampacity Inc.
$0.060
Semicontronic
$0.058
Advanced Electronics
Decca Corp
$0.130
$0.127
$0.126
Argo Parts USA
$0.269
$0.261
Aztec Data Supply Inc.
$0.279
Netroflash
$0.286
Modulus Dynamics
$0.324
$0.321
$0.311
Corohmni
$0.517
Continental Prestige Electronics
$0.339
$0.332
Abacus Technologies
GreenTree Electronics
Formix International (Excess)
Speed Components Ltd (Excess)
Eastek
Futuretech Components
Robosynatics
Lucentia Tech
Ceramic material offers high capacitance, low loss, and stable performance, making it a reliable choice for various electronic applications.
Rectangular package allows for easy integration and space-saving on PCBs, making it convenient for compact electronic designs.
Multi-layer design provides higher capacitance in a smaller footprint, ideal for applications where space is limited.
Having only 2 terminals simplifies the installation process and reduces the chances of wiring errors.
X7R temperature characteristics ensure stable capacitance over a wide temperature range, making it suitable for various environmental conditions.
High capacitance value allows for storing and releasing a large amount of electrical energy, ideal for filtering and smoothing circuits.
With a high rated DC voltage, this capacitor can handle voltages up to 50V, making it suitable for a wide range of electronic applications.
Fixed Capacitors 12105C106KAT2A attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
12105C106KAT2A Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Product Change Notification (PDF)
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Micro Commercial Components
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Yangzhou Yangjie Electronics
Microsemi
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
M39006/30-0040
Vishay Intertechnology
Vishay Intertechnology's M39006/30-0040 is a TANTALUM CAPACITOR with 850uF capacitance, 8V URdc, and 0.3 Tan Delta. Ideal for MIL-PRF-39006/30 applications requiring polarized capacitors with -55 to 125 °C operating range and low ESR of 470mohm in tubular package.
T491C475K025AT
KEMET Corporation
T491C475K025AT by KEMET: Tantalum capacitor with 4.7uF capacitance, 25V rated DC voltage, and 0.06 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current and high ripple current handling capabilities.
GRM188R60J106KE47D
Murata Manufacturing
Murata Manufacturing's GRM188R60J106KE47D is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
0402YD104KAT2A
KYOCERA AVX
0402YD104KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
BFC238350562
Vishay Intertechnology BFC238350562 is a film capacitor with capacitance of 0.0056uF, rated DC voltage of 1600V, and rated AC voltage of 550V. It is used in applications requiring high temperature tolerance up to 105°C, such as power supplies and industrial equipment due to its polypropylene dielectric material and through-hole mounting feature.
0603YC104K4T4A
0603YC104K4T4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for SMT applications requiring compact size and high reliability in automotive electronics.
MAL213838478E3
Vishay Intertechnology's MAL213838478E3 is a 4.7uF Aluminum Electrolytic Capacitor with 63V URdc, suitable for applications requiring high ripple current (35mA) and low tan delta of 0.09. With a compact tubular package and through-hole mounting feature, it operates b/w -40°C to 105°C, making it ideal for various electronic circuits.
M39006/25-0248
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM155R71C224KA12D
The Murata Manufacturing GRM155R71C224KA12D is a ceramic capacitor with capacitance of 0.22uF and rated DC voltage of 16V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
M39006/25-0143
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CC0402MRX5R5BB106
Yageo
Yageo's CC0402MRX5R5BB106 is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. With X5R temperature characteristics, it operates b/w -55°C to 85°C, ideal for surface mount applications in electronics requiring compact components with high capacitance stability.
M39006/25-0072
Vishay Sprague
GRM1885C1H103JA01D
GRM1885C1H103JA01D by Murata is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, operating from -55 to 125 °C, making it ideal for SMT applications requiring stable performance in a compact size.
C0603C471J5GACTU
KEMET Corporation's C0603C471J5GACTU is a ceramic capacitor with 0.00047uF capacitance and 50V URdc. Featuring C0G temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
M39006/220350
Cornell Dubilier Electronics
M39006/220350 by Cornell Dubilier Electronics is a TANTALUM (WET) capacitor with a capacitance of 47 uF and rated DC voltage of 50 V. It has a tan delta of 0.11, leakage current of 0.001 mA, and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in through hole mount applications.
C0805C225K4RACTU
KEMET C0805C225K4RACTU is a ceramic capacitor with 2.2uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring reliable multi-layer capacitors.
EEUFR0J222
Panasonic EEUFR0J222 is a 2200uF, 6.3V Aluminum Electrolytic Capacitor with 0.26 Tan Delta and 1744mA Ripple Current. Ideal for applications requiring high capacitance and low leakage current in cylindrical package design.
EEEFT1V561AP
Panasonic EEEFT1V561AP is a 560uF aluminum electrolytic capacitor with 35V rated DC voltage. It features tan delta of 0.12, leakage current of 0.196mA, and ripple current of 833mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
CL10A106KP8NNNC
Samsung Electro-mechanics
CL10A106KP8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 10uF capacitance and 10% tolerance. It operates b/w -55 to 85 °C, suitable for SMT mounting in various electronic applications. With X5R temperature characteristics, it offers stable performance in compact designs.
JMK107ABJ106MAHT
Taiyo Yuden
Taiyo Yuden's JMK107ABJ106MAHT is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it has a compact SMT package ideal for automotive applications. With dimensions of 1.6mm x 0.8mm x 0.8mm, this multi-layer capacitor offers high reliability and performance in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
12105C475K4T2A
12105C475K4T2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
12105C475KAZ2A
12105C475KAZ2A by KYOCERA AVX is a rectangular package ceramic capacitor with a capacitance of 4.7 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
1210B475K500CT
Walsin Technology
1210B475K500CT by Walsin Technology is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high reliability and stability.
12101C475KAT2A
12101C475KAT2A by KYOCERA AVX is a 4.7uF ceramic capacitor with 10% tolerance, X7R temperature code, and 100V rated DC voltage. Ideal for surface mount applications in electronics due to its compact size (3.3mm x 2.5mm x 2.79mm) and high operating temperature range (-55°C to 125°C).
12103D476MAT2A
12103D476MAT2A by KYOCERA AVX is a ceramic capacitor with 47uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
12105C106K4Z2A
12105C106K4Z2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, X7R temperature characteristics. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact rectangular package design.
12105C475K4Z2A
12105C475K4Z2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact, high-performance capacitors with negative tolerance of 10%.
12105C104KAT2A
12105C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. Ideal for SMT applications due to its compact size (3.3mm x 2.5mm x 1.02mm) and wraparound terminals, offering a temperature coefficient of 15% for use in various electronic devices.
12103D226MAT2A
12103D226MAT2A by KYOCERA AVX is a ceramic capacitor with a capacitance of 22 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
12101C475K4Z2A
12101C475K4Z2A by KYOCERA AVX is a 1210 size SMT ceramic capacitor with 4.7uF capacitance, rated for 100V URdc. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for automotive applications meeting AEC-Q200 standard.
1210YC226KAT2A
1210YC226KAT2A by KYOCERA AVX is a ceramic capacitor with 22uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
12105C106K4T2A
12105C106K4T2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, rated for 50V. It features X7R temperature characteristics and -55 to 125 °C operating range, suitable for AEC-Q200 applications. With a compact SMT package style and multi-layer design, it offers high reliability in automotive electronics.
12101C105K4Z2A
12101C105K4Z2A by KYOCERA AVX is a ceramic capacitor with 1uF capacitance, 100V rated DC voltage, X7R temperature characteristics. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and -55 to 125 °C operating temperature range.
12106D107MAT2A
12106D107MAT2A by KYOCERA AVX is a ceramic capacitor with 100uF capacitance, 6.3V rated DC voltage, and X5R temperature characteristics. Ideal for SMT applications due to its compact rectangular package and wraparound terminals. Suitable for use in electronics requiring stable performance in a wide temperature range.
12101C475K4T2A
12101C475K4T2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in automotive electronics meeting AEC-Q200 standards.
12101C225KAT2A
12101C225KAT2A by KYOCERA AVX is a ceramic capacitor with 2.2uF capacitance and 100V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in a small form factor.
12105C475KAT2A
12105C475KAT2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1210YD107MAT2A
1210YD107MAT2A by KYOCERA AVX is a SMT ceramic capacitor with 100uF capacitance and 16V URdc. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for surface mount applications requiring compact size and high capacitance with a negative tolerance of 20%.
12101C104KAT2A
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
12105C106K4Z4A
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved