Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIRECTIONAL COUPLER; Minimum Operating Temperature: -55 Cel; Maximum Insertion Loss: .3 dB; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Maximum Operating Frequency: 8000 MHz;
Median Price
$17.555
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
DigiKey
1+ parts
$20.550
100+ parts
$13.688
1k+ parts
$12.573
10k+ parts
-
Mouser Electronics
$14.560
$13.480
RF/Microwave Couplers FPC06076 attributes and parameters. Explore more RF/Microwave Couplers devices from Knowles Precision Devices
Characteristic Impedance:
Construction:
Maximum Insertion Loss:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
General Instrument
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
NC7WZ07P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
3-03
Tyco Electronics M/a-com
DIRECTIONAL COUPLER; Maximum Insertion Loss: 3 dB; Maximum Operating Frequency: 325000 MHz; Maximum Voltage Standing Wave Ratio: 1.25; Construction: WAVEGUIDE; Minimum Operating Frequency: 220000 MHz;
X3C19P2-30S
Anaren
DIRECTIONAL COUPLER; Maximum Voltage Standing Wave Ratio: 1.22; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 1700 MHz; Maximum Insertion Loss: .1 dB; Construction: COMPONENT;
SCP-4-4+
Mini-circuits
Mini-circuits' SCP-4-4+ is a 180° Hybrid Coupler with max input power of 30 dBm and VSWR of 1.61. Ideal for RF applications, it operates from 800 MHz to 1000 MHz with low insertion loss of 1.5 dB, making it suitable for high-frequency signal splitting in various setups.
10014-30
Ttm Technologies
10014-30 by Ttm Technologies is a COAXIAL RF/Microwave Coupler with 50 dBm CW power, 1.2 VSWR, and 0.4 dB insertion loss. Ideal for directional coupling in systems operating b/w 500-1000 MHz.
CPL-WB-00D3
STMicroelectronics
STMicroelectronics' CPL-WB-00D3 is a 50 ohm directional coupler with max input power of 35 dBm, insertion loss of 0.2 dB, and operating frequency range from 824 MHz to 2170 MHz. Ideal for RF applications where precise power monitoring and signal distribution are required in temperature range -30 °C to 85°C.
X3C19P2-30S by Ttm Technologies is an RF/Microwave Coupler with max input power of 53.01 dBm, VSWR of 1.22, and insertion loss of 0.1 dB. It operates b/w 1700-2000 MHz, ideal for directional coupling in high-frequency applications with a temp range from -55 to 95°C.
4859
L-3 Narda-miteq
DIRECTIONAL COUPLER; Mounting Feature: PANEL MOUNT; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Operating Frequency: 15000 MHz; Additional Features: SMA-F; Construction: COAXIAL/WAVEGUIDE;
FPC06073
Knowles Precision Devices
FPC06073 by Knowles Precision Devices is a ceramic, metal-sealed cofired RF directional coupler with 4 terminals. It operates b/w -55°C to 125°C, with an insertion loss of 0.2 dB at frequencies ranging from 4-8 GHz. Ideal for surface mount applications in RF and microwave systems.
3-10
DIRECTIONAL COUPLER; Minimum Operating Frequency: 75000 MHz; Maximum Operating Frequency: 110000 MHz; Construction: WAVEGUIDE; Maximum Voltage Standing Wave Ratio: 1.2; Maximum Insertion Loss: 1.4 dB;
X3C09P1-05S
RF/Microwave Couplers;
4065
Lockheed Martin Microwave
90 DEGREE HYBRID COUPLER; Maximum Operating Frequency: 16000 MHz; Construction: MODULE; Maximum Input Power (CW): 44.77 dBm; Maximum Operating Temperature: 105 Cel; Maximum Voltage Standing Wave Ratio: 1.35;
DCPL-WB-00D3
DCPL-WB-00D3 by STMicroelectronics is a 50 ohm directional coupler with max input power of 35 dBm, insertion loss of 0.2 dB, and operating frequency range from 824 MHz to 960 MHz. Ideal for RF applications where precise power monitoring and signal directionality are required in temperatures ranging from -30 °C to 85°C.
XMC0204F1-03G
90 DEGREE HYBRID COUPLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Technology: HYBRID; Minimum Operating Frequency: 2000 MHz; Additional Features: HIGH ISOLATION;
3024
DIRECTIONAL COUPLER; Construction: MODULE; Maximum Input Power (CW): 56.99 dBm; Minimum Operating Frequency: 4000 MHz; Maximum Voltage Standing Wave Ratio: 1.2; Maximum Operating Frequency: 8000 MHz;
HHM22137A2
TDK
DIRECTIONAL COUPLER;
CR-20-2.5
Crane Aerospace & Electronics
CR-20-2.5 by Crane Aerospace & Electronics is a RF directional coupler with max input power of 36.99 dBm, VSWR of 1.3, and operating temp range from -55°C to 85°C. Ideal for applications requiring precise power monitoring in RF/Microwave systems within the frequency range of 0.1 MHz to 5 MHz.
CPL-WB-01C2
CPL-WB-01C2 by STMicroelectronics is a directional coupler designed for RF applications, operating b/w 824 MHz and 1980 MHz. It handles up to 35 dBm input power with a max insertion loss of just 0.2 dB, functioning effectively in temperatures from -30 °C to 85 °C. Ideal for enhancing signal integrity in communication systems.
CP0603D1747ASTR
KYOCERA AVX
CP0603D1747ASTR by KYOCERA AVX is a RF directional coupler with 1.4 dB insertion loss, 34.77 dBm CW power handling, and 50 ohm impedance. It operates b/w 1710-1785 MHz, suitable for RF/Microwave applications requiring high power handling and precise signal directionality in temperatures ranging from -40 to 85°C.
751
Sage Laboratories
90 DEGREE HYBRID COUPLER; Maximum Insertion Loss: .1 dB; Minimum Operating Frequency: 500 MHz; Additional Features: N-F; Construction: COAXIAL; Maximum Operating Frequency: 1000 MHz;
DBTC-9-4L
The Mini-circuits DBTC-9-4L is a 50 ohm directional coupler with max input power of 30 dBm and VSWR of 1.3. With a wide frequency range from 5 MHz to 1000 MHz, it's ideal for RF/Microwave applications requiring low insertion loss up to 2 dB. The module can operate in temperatures ranging from -40°C to 85°C, making it suitable for various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved